Use this object to define signaling and media Quality of Experience (QoE) configuration.
| Info |
|---|
|
As a best practice, always use UPPERCASE for trunk group names. |
Command Syntax
| Code Block |
|---|
|
% set addressContext <name> zone <name> sipTrunkGroup <name> qoe
asr
criticalQosAsrLimit <0-70>
defaultQosAsr <0-100>
majorQosAsrLimit <0-90>
clu
criticalQosCluLimit <80-100>
minTimeToProceed <60-3600>
pgrd
criticalQosPgrdLimit <50-10000>
defaultPgrdFactor <50-10000>
rfactor
criticalQosRfactorLimit <0-100>
majorQosRfactorLimit <0-100>
scru
criticalQosScruLimit <80-100>
|
Command Parameters
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SIP Trunk Group QoE Parameters |
|---|
|
| Parameter | Length/Range | Description |
|---|
asr | N/A | ASR signaling quality measurement utilizing the following parameters.criticalQosAsrLimit – The critical ASR limit below which call admission is stopped. (range: 0-70 / default = 40).defaultQosAsr – Default value used by ASR when no calls are made during a sampling period (range: 0-100 / default = 90).majorQosAsrLimit – The major ASR limit below which call admission is reduced. (range: 0-90 / default = 70).
| clu | N/A | Call Limit Utilization (CLI) signaling quality measurement.criticalQosCluLimit – Critical limit (in percentage) above which all calls are dropped on specified peer/trunk group. (range: 80-100 / default = 80).
| minTimeToProceed | 60-3600 | The minimum time period (in seconds) before call admission starts after any trunk group KPI falls below the critical threshold. (default = 60). | pgrd | N/A | Post Gateway Ringing Delay (PGRD) signaling quality measurement. criticalQosPgrdLimit – The critical PGRD limit (in milliseconds) above which the call admission is stopped. (range: 50-10000 / default = 1000).defaultPgrdFactor – Default value to be used as PGRD when no call are made for a sampling period. (range: 50-10000 / default = 1000).
| rfactor | N/A | R-Factor signaling quality measurement. criticalQosRfactorLimit – The critical R-Factor limit below which call admission is stopped. (range: 0-100 / default = 50).majorQosRfactorLimit – The major R-Factor limit below which call admission is reduced. (range: 0-100 / default = 70).
| scru | N/A | Sustained Call Rate Utilization signaling quality measurement.criticalQosScruLimit – Critical limit (in percentage) above which all calls are dropped on specified peer/trunk group. (range: 80-100 / default = 80)
|
|