A Class of Service (CoS) Profile is a classification of common services shared by a group of entities (trunk groups, carriers, subscribers) giving them particular rights and privileges. CoS profiles can be provisioned using a number of call type filters and screening scripts as described below. The
is shipped with a number of predefined CoS profile scripts.
You can also use the
Service Profile Editor (SPE) to provision additional scripts which are then selectable from the Class of Service Profile configuration.
Command Syntax
| Code Block |
|---|
% set profiles services classOfService <CoS name>
blocking
entry <called number, country, call type>
service <disable | enable>
nonSubscriberCallTypeFiltering
carrierCutThrough | internationalOperator |
internationalType | ipVpnService | localOperator |
longDistanceOperator | mobile | nationalOperator |
nationalType | otherCarrierChosen | private | test |
transit | userName
screening script <script> |
Command Parameters
The Class of Service Parameters are as shown:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Class of Service Parameters |
|---|
|
Parameter | Description |
|---|
classOfService
| <name> – A unique identifier for the Class of Service Profile.
| blocking
| Parameters associated with blocking service. entry <called# countryCode callType> – Enter both the called number, country code and call type, separated by a space (callType default is "nationalOperator") against which the blocking service applies. To block any number in the country code, use double quotes "" (see Command Example below).service – Flag to enable/disable the blocking service.
| nonSubscriberCallTypeFiltering
| Select one or more call types (using comma-separated format) to specify the type of calls allowed for non-subscriber call routing. By default, all options are selected. carrierCutThroughinternationalOperatorinternationalTypeipVpnServicelocalOperatorlongDistanceOperatormobilenationalOperatornationalTypeotherCarrierChosenprivatetesttransituserName
| screening script
| Use this parameter to select the screening script to use with this CoS Profile.
BLOCKING DEFAULT_TERMINATING NONSUB_DENY NO_ROUTES_FOUND SCREENINGSONS_PLAY_ANN_MK_CALL SONS_ROUTES_EXHAUSTED SONS_ROUTES_EXHAUSTED_1 SONS_ROUTES_EXHAUSTED_2 SONS_ROUTES_EXHAUSTED_3SONS_ROUTES_EXHAUSTED_4 SONS_ROUTES_EXHAUSTED_5 SONS_ROUTES_EXHAUSTED_6 SONS_ROUTES_EXHAUSTED_7 SONS_ROUTES_EXHAUSTED_8SONS_ROUTES_EXHAUSTED_9 SONS_SIP_REFER_RELAY TANDEM
|
|
Command Example
| Step | Action |
|---|
| 1 | Create and enable a class of service called "BLOCK_COUNTRY_CODES" to block two specific international country codes (20 and 27). | Code Block |
|---|
| set profiles services classOfService BLOCK_COUNTRY_CODES blocking service enable entry "" 20 callType internationalType
set profiles services classOfService BLOCK_COUNTRY_CODES blocking entry "" 27 callType internationalType
commit
show profiles services classOfService BLOCK_COUNTRY_CODES
blocking {
service enable;
entry "" 20 {
callType internationalType;
}
entry "" 27 {
callType internationalType;
}
}
|
|
| 2 | Assign the class of service to a trunk group named "APBX5TEST". | Code Block |
|---|
| set addressContext default zone zonePublicTrunking sipTrunkGroup APBX5TEST policy services classOfService BLOCK_COUNTRY_CODES
commit |
|