Page History

...

1. Validate the Meta Variable Table

2. Create an IP Interface Group and IP Interface
3. Create Static Route
4. Create DNS Group and DNS Server
5. Create a NTP Server
6. Create D-SBC SigPort
7. Create Cluster Type
8. Create Zone
9. Create SIP SigPort
10. Create SIP Trunk Group
11. Configure Remote Policy Server

The following sections lists the steps involved to configure M-SBC:

pagebreak 

Configure and Activate Signaling SBC Configuration

...

1. Select Address Context > IP Interface Group > IP Interface. The IP Interface List page displays.

   1. Select default from the Address Context drop-down menu.
   2. Select an interface group created from the IP Interface Group drop-down menu. For example, SLIG1.
   3. Click + New IP Interface. The Create New IP Interface section displays.
   4. Enter a name for the interface. For example, SLIF1.
   5. Enter IP Meta key for IP Var V4, Prefix Var V4, IP Public Var V4, IP Var V6, IP Prefix Var V6, IP Public Var V6, and IP VLAN Tag Var fields.
   6. Select Mode as In Service.
   7. Select State as Enabled.
   8. Enter the CE Name. For example, vsbcSystem.
   9. Select pkt0 port from the Port Name drop-down menu.
   10. Click Save.

    

   Caption
   0 Figure 1 Creating IP Interface

   
   The Object created successfully message displays.
   
   

2. Repeat step 1 to add an interface for SLIG2 interface group with IP interface as SLIF2 for pkt1 port. The two interfaces are listed.

   Caption
   0 Figure 1 Created IP Interface

   pagebreak

Anchor
static_route static_route

Create Static Route

...

1. Select Address Context > DNS Group > Server. The Server page displays.
   

2. Select default from the Address Context drop-down menu.
   

3. Select the DNS group created from the DNS Group drop-down menu. For example, DSBC_DNS.
   

4. Click + New Server. The Create New Server section displays.
   

5. Enter the server name.
   

6. Select State as Enabled.
   

7. Enter the DNS server IP in the IP Address V4 or V6 field.
   

8. Click Save.
   

   Caption
   0 Figure 1 DNS Server Group

   
   The Object created successfully message displays.
   

Anchor
step3 step3

Create a NTP Server

...

1. Select System > NTP > Server Admin. The Server Admin page displays.\

2. Click + New Server Admin. The Create New Server Admin section displays.
3. Enter server IP address.
4. Select State as Enabled.
5. Select Version as Version4.

6. Click Save.

   Caption
   0 Figure 1 NTP Server Admin

   
   The Object created successfully message displays.
   
   

7. Select System > NTP > Time Zone. The Time Zone page displays.

8. Select the instance from the list. The Edit Selected Time Zone section displays.

9. Select an appropriate time zone from the Zone drop-down menu.

10. Click Save.

    Caption
    0 Figure 1 Configuring Time Zone

    
    The Updated Successfully message displays.

...

Anchor
step4 step4

Create D-SBC SigPort

...

1. Select System > Dsbc > Dsbc Sig Port. The Dsbc Sig Port page displays.
2. Select SLIG2 from the IP Interface Group drop-down menu.

3. Click Save.

   Caption
   0 Figure 1 Creating D-SBC SigPort

    

   The Updated Successfully message displays.

Anchor
step5 step5

Create a Cluster Type

1. Select System > Dsbc > Cluster > Type. The Type page displays.

2. Click + New Type. The Create New Type section displays.

3. Select Name as Policer.
4. Select State as Enabled.

5. Enter the FQDN. For example, msbc01.lbs.com

   Note
   The Floating IP address of packet interfaces should be added as A record in DNS server.

6. Select the DNS group from the DNS Group drop-down menu.

7. Click Save.

   Caption
   0 Figure 1 Creating Cluster Type

   
   The Object created successfully message displays.

...

Anchor
step6 step6

Create a Zone

...

1. Select Address Context > Zone. The Zone page displays.

2. Select default from the Address Context drop-down menu.

3. Click + New Zone. The Create New Zone section displays.

4. Enter a Name. For example, INTERNAL.
5. Enter a ID.

6. Click Save.

   Caption
   0 Figure 1 Creating Zone

   
   The Object created successfully message displays.
    

7. Repeat steps 3 through 6 to create another zone. For example, EXTERNAL. The zones are listed.

   Caption
   0 Figure 1 Created Zone 3 Zone

   pagebreak

Anchor
step7 step7

Create a SIP SigPort

...

1. Select Address Context > Zone > SIP Sig Port. The SIP SigPort page displays.
2. Select default from the Address Context drop-down menu.
3. Select a zone from the Zone drop-down menu. For example, INTERNAL.
4. Click + New SIP Sig Port. The Create New SIP Sig Port section displays.
5. Enter an Index.
6. Set State as Enabled.
7. Select SLIG1 from the IP Interface Group Name drop-down menu.
8. Select sip-tcp option in the Transport Protocols Allowed.

9. Click Save.

   Caption
   0 Figure 1 Creating SIP SigPort 3 SIP SigPort

    

   The Object created successfully message displays.

10. Repeat steps 3 through 9 to create another SIP SIg Port for external zone. The SIP Sig Ports are listed.

    Caption
    0 Figure 1 Created SIP SigPort

    pagebreak

Anchor
step8 step8

Create a SIP Trunk Group

...

1. Select Address Context > Zone > SIP Trunk Group. The SIP Trunk Group page displays
2. Select default from the Address Context drop-down menu.
3. Select a zone from the Zone drop-down menu. For example, INTERNAL.
4. Click + New SIP Trunk Group. The Create New SIP Trunk Group section displays.
5. Enter Name. For example, INGRESS_TG.
6. Set State as Enabled.
7. Set Mode as In Service.

8. Click Save.

   Caption
   0 Figure 1 Creating SIP Trunk Group

   
   The Object created successfully message displays.
   
   

9. Repeat steps 3 through 8 to create another SIP trunk group for EXTERNAL zone. The SIP trunk groups are listed.

   Caption
   0 Figure 1 Created SIP Trunk Group

   pagebreak

Configure Ingress IP Prefix

...

1. Select Address Context > Zone > SIP Trunk Group > Ingress IP Prefix. The Ingress IP Prefix page displays.
2. Select default from the Address Context drop-down menu.
3. Select a zone from the Zone drop-down menu. For example, INTERNAL.
4. Select the trunk group from the SIP Trunk Group drop-down menu. For example, INGRESS_TG.
5. Click + New Ingress IP Prefix.  The Create New Ingress IP Prefix section displays.
6. Enter the IP Address.
7. Enter the Prefix Length.

8. Click Save.

   Caption
   0 Figure 1 Creating Ingress IP Prefix

   The Object created successfully message displays.

   Pagebreak

Configure Media

Procedure

1. Select Address Context > Zone > SIP Trunk Group > Media. The Media page displays.
2. Select default from the Address Context drop-down menu.
3. Select a zone from the Zone drop-down menu. For example, INTERNAL.
4. Select the trunk group from the SIP Trunk Group drop-down menu. For example, INGRESS_TG.
5. Select MLIG1 from the Media IP Interface Group Name drop-down menu.

6. Click Save. 

   Caption
   0 Figure 1 Configuring Media

    

   The Object created successfully message displays. 

7. Repeat steps 3 through 6 to configure media for EGRESS_TG trunk group on EXTERNAL zone to select MLIG2.

   Pagebreak

Anchor
step9 step9

Configure Remote Policy Server

...

1. Select System > Policy Server > Local Server. The Local Server page displays.

2. Select the local server listed. The Edit Selected Local Server section displays.

3. Set State as Disabled.

4. Select Out of Service from the Mode drop-down menu.

5. Click Save. 

   Caption
   0 Figure 1 Editing Local Server

    

   The Updated Successfully message displays.

...

Create a Remote Policy Server

...