Page History

Global Call Routing objects.

• route – Route statistics:
  
  • Element Type
  • Element ID1
  • Element ID2
  • Routing Type
  • Destination National
  • Destination Country
  • Call Type
  • Digit Type
  • Range Profile
  • Filter Profile
  • Domain Name
  • Routing Label
• routingLabel – Routing Label statistics:
  • Name
  • Overflow Number
  • Overflow NOA
  • Overflow NPI
  • Route Prioritization Type
  • Route Prioritization Type For Equal Cost Routes
  • Script
  • Action
  • Num Routes Per Call
  • Sequence
  • Trunk Group
  • IP Peer
  • Proportion
  • Cost
  • In Service
  • Testing

callTrace

Call Trace group configuration for the Node.

• callFilter – This table contains call trace filters for the node.
• callTraceTimer – The call trace timer value.
• errorFilter – The error filter to apply system wide.
• maxTriggerCount – The trigger count for both call and error trace filters.
• signalingPacketCapture – This entry contains signaling packet capture devices and admin state.

carrier  

Carrier definitions.

• <id> – A unique identifier for this carrier.
• services classOfService – Class of service associated with this carrier.

country  

 Country definitions.

• <id> – A unique country identifier.
• listOfNumberOfDigitsToMatch – List of digit lengths in called/calling numbers for pattern matching.

  • called – List of digit lengths (comma-separated) in Called Number for pattern matching.

  • calling – List of digit lengths (comma-separated) in Calling Number for pattern matching.

  • criteria – List of digit lengths (comma-separated) in Called Number for pattern matching when determining if number translation is required.

• variableLengthDialPlan – Indicates whether a variable length dial plan is enabled or disabled.

license  

sessionThreshold – The current threshold limit for the number of licensed sessions.

monitorEndpoint

The current monitor endpoint (MCT) settings. Fields include:

• Name
• Trunk Group
• IP Address
• Port Number
• State

monitorTarget  

The current monitor target settings. Fields include:

• name – Target name.
• gcid – The target GCID (Global Call Identifier) to tap.
• monitorEndpoint – Name of endpoint to use for recording
• monitorLeg – Specifies which leg to tap (all, both, egress, ingress)
• duration – The duration (in seconds) that the monitor target is tapped.
• state – Administrative state of the monitor target configuration

npaNxx <npaNxx code>

National destination code settings. The fields include:

• national – National destination code
• portedFlag – The portedFlag state

qoeCallRouting

QoS-based call routing table.

• mediaQosBasedRouting – The status of the flag for Media QoS KPI calculation and validation
• signalingQosBasedRouting – The status of the flag for Signaling QoS KPI calculation and validation

script

List of pre-seeded scripts used for call control. The fields include:

• <script name>
• description 

• majorVersion

• minorVersion


security  ipsec

System-wide IPSec settings.

• ikeRetransmitCount – Ike Message retransmission count
• ikeRetransmitInterval – Ike Message retransmission interval in seconds

servers  

Global configuration details for ENUM and E911 servers.

• dns – DNS Global configuration parameters

  • iterationCount – The global Iteration count limit for DNS iterations of server requests.

  • monitoringInterval – The global monitoring interval (in secs) for DNS Servers.

  • probeInterval – The global probe interval (in secs) for blacklisted DNS Servers.

  • retransmissionCount – The global retransmission count limit for DNS iterations of server requests.

  • retransmissionTimer – The global retransmission timer value for DNS iterations of server requests.

  • timeouts – The global number of timeouts for blacklisting a DNS Server.

• e911 – Enhanced 911 service

• e911VpcDevice – E911 VPC Device.
• enumDomain – ENUM configuration for a domain.
• enumService – ENUM service (lnp, cnam, sipAor)

signaling

Global Signaling objects

• gwSigTimers – This table contains information about GW Signaling Timers for the node.

  • congRelDelay – The amount of time (in seconds) that a call which is rejected due to congestion will be delayed before the release is issued.

  • establish – The Gateway Signal Channel Establishment Timer (in seconds.) This value applies to all signal channels

  • idle – The amount of time (in hours) a GW Signaling Link May be idle before it is taken down.

  • keepalive – This is the Gateway Signal Channel Keepalive Timer (in seconds.) This value applies to all signal channels

  • retry – The amount of time (in minutes) the GSX will continue to attempt to recover a GW Signaling Link as long as there are stable calls up

• h323SigTimers – Global H323 Signaling Timers configuration
  

  • establish –  H225 signal channel establishment timer (in seconds)

  • t301 – T301 call timer (in seconds)

  • t302 – T302 call timer (in seconds)

  • t303 – T303 call timer (in seconds)

  • t304 – The T304 call timer (in seconds)

  • t310 – T310 call timer (in seconds)

  • tcpConnect – TCP connect timer (in seconds)

• sipPeerOverloadControl – Global SIP Peer Overload configuration.

  • discardPeriod – Discard period (in seconds) for the Peer Overload back-off algorithm.

  • rejectThreshold – Reject threshold (in rejects/sec) for the Peer Overload back-off algorithm.

  • samplingPeriod – Sampling period (in seconds) for the Peer Overload back-off algorithm.

  • stepDownGain – Step down gain for the Peer Overload back-off algorithm.

• sipSigControls – Global SIP Signaling Control settings.

  • egressRNParam – Flag to enable/disable sending RN parameter on egress.

  • loopDetectionFeature – Flag to perform SIP loop detection on SIP INVITEs as described in RFC3261.

  • maxPduSizeValue – The maximum SIP PDU size.

  • multipleContactsPerAor – Flag to support multiple different contacts for same AoR.

  • registrarSupportContactParam – Flag to determine if the registrar supports contact parameters and will echo such parameters in the RURI.

  • sendSurrogateUnRegAfterReboot – Flag to use surrogate registration trigger de-register messages to all AORs configured to use the Surrogate Registration feature after a reboot.

  • suppressErrorInfoHdr – Flag to suppress the Error-Info header in a 400 response.

  • surrogateRegisterPacingTime – The time gap (in milliseconds) between a final response of surrogate register and next surrogate register message sent across all peers.

  • ucidNodeId  – UCID Node Id to be used to generate UCID in the User-to-User Header.

sipDomain

SIP Domain name.

subscriber  

Subscriber configuration settings.

• ID – Unique identifier for Subscriber.
• country – Country in which the subscriber resides.
• owningCarrier – A 3 or 4-digit Carrier ID number that represents the Carrier who owns the subscriber. Each Carrier can have specific services configured for Subscriber calling numbers.
• packetServiceProfile – The packet service profile used to override the IP trunk groups packet service profile.
• classOfService – Class of service assigned to the subscriber.