Page History

...

Back to Table of Contents

Back to Customer Replaceable Units

...

The front Bezel includes a washable Air Filter. The Air Filter part number is : SBC-7000-AIR-FILTER.

...

1. Attach an Electrostatic Discharge wrist strap by using the ESD grounding point on the front panel of the chassis (see refer to Connecting Electrostatic Discharge Wrist Strap on SBC 7000 for details).
2. Remove the Bezel assembly (see refer to SBC 7000 Series Bezel).
3. Take the Bezel assembly to a work area not in the vicinity of the air intake of the SBC chassis ensuring any loose particles are not drawn into the SBC chassis during the filter removal procedure.

4. Set Bezel assembly face down on a work surface.

5. The Air Filter can be accessed inside the front Bezel.

6. Un-clip the Air Filter from the Bezel and pull it out.

   Caption
   0 Figure 1 Un-clipping the Air Filter

7. Once the filter is washed or replaced, insert the Air Filter into the Bezel.

   Caption
   0 Figure 1 Inserting the replaced or washed Air Filter

8. Push down the free sides of the air filter, such that it is attached to the Bezel.

   Caption
   0 Figure 1 Pushing down the Air Filter to fit to the Bezel

9. Reattach the Bezel assembly to the SBC chassis (SBC 7000 Series Bezel).

...