Page History

Parts and Tools Required

The following items are needed to replace a CSC:

• Electrostatic discharge (ESD) strap
• Replacement CSC
• A #2 Phillips-head screwdriver

Replacing Core Server Card

To replace a CSC, do the following:

1. Perform a graceful shutdown of the 

   Spacevars
   0 series2

   system through BMC GUI.
2. Attach an Electrostatic Discharge wrist strap by using the ESD grounding point on the back panel of the chassis (see Connecting Electrostatic Discharge Wrist Strap on SBC 7000 for details).
3. Remove all the existing connections from all the ports.

4. Unscrew the thumb screws using #2 Phillips-head screwdriver, open release levers on each side, and pull the CSC module out.

   Caption
   0 Figure 1 SBC 7000 Core Server Card pulled out
   Image Modified

5. To replace, insert the new module to the correct slot, push the CSC module completely.
6. Close the release levers.
7. Tighten the thumb screws using #2 Phillips-head screwdriver.
8. Re-connect all the ports.
9. Start the

   Spacevars
   0 series2

   system through BMC GUI.

CRU Storage

All  

• Humidity must be less than 95% (non-condensing).
• Temperature must be between -40C and +70C.