Page History

digitProfile

1-23

The user name of this digit profile with following attribute:
type – Specifies the digit's format with parameters defined below.

dtmf

N/A

Dual-tone multifrequency (DTMF) digit type. Options include:

• dtmfDetect – DTMF digit detection attributes:
  • frequenceRange - Frequency tolerances for digit detection.
    • medium (default)
    • narrow
    • wide
    • wider
  • minOffDuration – The minimum inter-digit duration (in milliseconds) for digit detection. The value must be in increments of 5 ms. (range: 25 to 80 / default = 25).
  • minOnDuration – The minimum tone duration (in milliseconds) required for digit detection. The value must be in increments of 5 ms. (range: 25 to 80 / default = 25.
  • minPower – The minimum power level (in dBm) required for digit detection. (range: -45 to -25 / default = -45).
  • twistCutoff – Ratio of high to low group power. Twist ratios below the twist cutoff result in digit detection. Twist ratios above the twist cutoff result in digit rejection. (range: 4dB-12dB, in increments of 2dB / default = 8dB).
• dtmfGenerate – DTMF digit generation attributes. Options include:
  • break – Silence duration (in milliseconds) between generated digits (range: 0-8000 / default = 100).
  • make – Duration (in milliseconds) of generated digits (range: 0-8000 / default = 100).
  • power – Digit generation power level in dBm (range: -50 to +3 / default = 10).

mfr1

N/A

Multi-link Frame Relay (MFR) variant 1 digit type.

• mfr1Detect – MFR1 digit detection attributes.
  • frequenceRange – Frequency tolerances for digit detection.
    • medium
    • narrow (default)
    • wide
  • minOffDuration – Minimum inter-digit duration (in milliseconds) for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25 ms and 80 ms. For MF digits, the value must be between 10 ms and 100 ms. (range: 10-100 / default = 15).
  • minOnDuration – Minimum tone duration (in milliseconds) required for digit detection. The value must be in increments of 5ms. (range: 25-100 / default = 25).
  • minPower – Minimum power level (in dBm) required for digit detection. (range: -45 to -25 / default = -30).
• mfr1Generate – MFR1 digit generation attributes. Options include:
  • break – Silence duration (in milliseconds) between generated digits (range: 0-8000 / default = 65)
  • make – Duration (in milliseconds) of generated digits. (range: 0-8000 / default = 65)
  • makeKp – Duration (in milliseconds) of generated KP digits. (range: 0-8000 / default = 105).
  • power – Digit generation power level (in dBm). (range: -50 to +3 / default = -7).

mfr2

N/A

Multi-link Frame Relay (MFR) variant 2 digit type.

• mfr2Detect – MFR2 digit detection attributes.
  • frequenceRange – Frequency tolerances for digit detection.
    • medium
    • narrow (default)
    • wide
  • maxPulseDuration – Maximum allowed duration (in milliseconds) of a received pulsed MF tone. (range: 0-8000 / default = 1000).
  • minOffDuration – Minimum inter-digit duration (in milliseconds) for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25 ms and 80 ms. For MF digits, the value must be between 10 ms and 100 ms. (range: 10-100 / default = 15).
  • minOnDuration – Minimum tone duration (in milliseconds) required for digit detection. The value must be in increments of 5ms. (range: 25-100 / default = 25).
  • minPower – Minimum power level (in dBm) required for digit detection. (range: -45 to -25 / default = -30).
  • postPulseDelay – Duration (in milliseconds) after a pulse signal is transmitted when no forward signals are recognized. (range: 0-8000 / default = 250).
• mfr2Generate – MFR2 digit generation attributes. Options include:
  • break – Silence duration (in milliseconds) between generated digits (range: 0-8000 / default = 150)
  • finalDigitDelay – Minimum interval (in milliseconds) after sending last message to apply answer line signal in the backward direction. (range: 0-8000 / default = 50).
  • make – Duration (in milliseconds) of generated digits. (range: 0-8000 / default = 150).
  • maxFwdOffDuration – Maximum amount of time (in milliseconds) between the removal of a forward signal and the sending of the next forward signal. (range: 100-60000 / default = 27000).
  • maxFwdOnDuration – Maximum amount of time (in milliseconds) a forward signal is sent. (range: 100-60000 / default = 15000).
  • power – Digit generation power level (in dBm). (range: -50 to +3 / default = -7).
  • prePulseDelay – Delay (in milliseconds) between the end of last compelled signal and the start of backward pulsed signal. (range: 0-8000 / default = 100).