Page History

Anchor

	top
	top

Add_docset_workflow

APPRJID	SBX-27890
AUTH1	bscoggins
DEV1	gkhederian
LDEV1	bscoggins
SVT1	avalente
LSVT1	bscoggins
AUTHJID	SBX-27890

...

Panel

In this section:

Table of Contents

maxLevel	3
minLevel	2

Include Page

	Call_Stats_Terms
	Call_Stats_Terms

...

Code Block

language	none

> show table global
	cac 
	callCountCurrentStatistics
	callCountIntervalStatistics
	callCountStatus 
	callDetailStatus 
	callMediaStatus 
	callResourceDetailStatus 
	callRouting 
	callSummaryStatus 
	callTrace 
	callTraceStatus
	carrier 
	country 
	dtlsSrtpStatistics
	globalTrunkGroupStatus 
	icmpGeneralGroupStatistics 
	ipGeneralGroupStatistics 
	license 
	monitorEndpoint 
	monitorEndpointStatus 
	monitorTarget 
	monitorTargetStatus 
	npaNxx 
	ocsCallCountStatus 
	policyServer 
	qoeCallRouting 
	script 
	security 
	servers 
	signaling 
	sipDomain 
	siprecStatus
	subscriber 
	tcpGeneralGroupStatistics 
	udpGeneralGroupStatistics

Command Parameters

Noprint
Back to Top

Common Parameters to 'show status / table global' Commands

Div

class	excerptdiv

Shared

Call Media status table. The following media statistics data applies to the current call:

egressMediaStream1InterarrivalJitter – The variation of packet inter-arrival time of egress MediaStream1 for this call

egressMediaStream1OctetsReceived – The number of octets received in egress MediaStream1 for this call

egressMediaStream1OctetsSent – The number of octets sent in egress MediaStream1 for this call

egressMediaStream1PacketLatency – The packet latency in the egress MediaStream1 for this call

egressMediaStream1PacketsDiscarded – The number of packets discarded in egress MediaStream1 for this call

egressMediaStream1PacketsLost – The number of packets lost in egress MediaStream1 for this call

egressMediaStream1PacketsReceived – The number of packets received in egress MediaStream1 for this call

egressMediaStream1PacketsSent – The number of packets sent in egress MediaStream1 for this call

egressMediaStream1RtcpPacketsReceived – The number of RTCP packet received in egress MediaStream1 for this call (if RTCP is enabled for this call leg)

egressMediaStream1RtcpPacketsSent – The number of RTCP packet sent in egress MediaStream1 for this call (if RTCP is enabled for this call leg)

egressMediaStream1SrtpAuthFailure – The number of RTP authentication failures on egress leg

egressMediaStream1SrtpReplayFailure – The number of RTP anti-replay failures on egress leg

egressMediaStream1StunDtlsPacketsReceived – The number of STUN/DTLS packets received on egress leg

egressMediaStream1StunDtlsPacketsDiscarded – The number of STUN/DTLS packets discarded on egress leg

egressRemPacketsLost – The number of remote packets lost for this call leg

egressRFactorInbound – The inbound R-Factor threshold utilization value (as a percentage) on egress leg

egressRFactorOutbound – The outbound R-Factor threshold utilization value (as a percentage) on egress

ingressMediaStream1InterarrivalJitter – The variation of packet inter-arrival time of ingress MediaStream1 for this call

ingressMediaStream1OctetsReceived – The number of octets received in ingress MediaStream1 for this call

ingressMediaStream1OctetsSent – The number of octets sent in ingress MediaStream1 for this call

ingressMediaStream1PacketLatency – The packet latency in the ingress MediaStream1 for this call

ingressMediaStream1PacketsDiscarded – The number of packets discarded in ingress MediaStream1 for this call

ingressMediaStream1PacketsLost – The number of packets lost in ingress MediaStream1 for this call

ingressMediaStream1PacketsReceived – The number of packets received in ingress MediaStream1 for this call

ingressMediaStream1PacketsSent – The number of packets sent in ingress MediaStream1 for this call

ingressMediaStream1RtcpPacketsSent (includes RTCP port, if enabled, for this call leg)

ingressMediaStream1RtcpPacketsReceived (includes RTCP port, if enabled, for this call leg)

ingressMediaStream1RtcpPacketsReceived – The number of RTCP packet received in ingress MediaStream1 for this call (if RTCP is enabled for this call leg)

ingressMediaStream1RtcpPacketsSent – The number of RTCP packet sent in ingress MediaStream1 for this call (if RTCP is enabled for this call leg)

ingressMediaStream1SrtpAuthFailure – The number of RTP authentication failures on ingress leg

ingressMediaStream1SrtpReplayFailure – The number of RTP anti-replay failures on ingress leg

ingressMediaStream1StunDtlsPacketsReceived – The number of STUN/DTLS packets received on ingress leg

ingressMediaStream1StunDtlsPacketsDiscarded – The number of STUN/DTLS packets discarded on ingress leg

ingressRemPacketsLost – The number of remote packets lost for this call leg

ingressRFactorInbound – The inbound R-Factor threshold utilization value (as a percentage) on ingress leg

ingressRFactorOutbound – The outbound R-Factor threshold utilization value (as a percentage) on ingress leg

mediaStream1Codec – The codec for this media stream

mediaStream1Label – The label applied to this media stream

Excerpt

Caption

1
0	Table

Common Parameters - 'show status global' and 'show table global'
3	Common Parameters

Parameter Description

cac

Global CAC objects. Results include following fields:

sharedCacCurrentStatistics – The shared CAC-limits pool current statistics.
sharedCacFailureCurStats – The shared CAC-limits pool current failure statistics.
sharedCacFailureIntStats – The shared CAC limits pool interval failure statistics.
sharedCacIntervalStatistics – The shared CAC-limits pool statistics for the specified interval.
sharedCacStatus – Current status of the shared CAC-limits pool.

callCountStatus

Call count statistics for the server; cumulative count since boot. Results include following fields:

activeCalls – A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing).
callAttempts – Number of call attempts on this server.
callCompletions – Total number of call attempts that were completed on this server.
callUpdates – Total number of call updates (re-INVITES or any other triggers that result in call transitioning to transient state/stable state).
stableCalls – Current number of stable managed calls on this server.
totalCalls (see activeCalls definition above).
totalCallsEmergEstablishing – A snapshot of the total number of emergency calls currently in the 'establishing' state.
totalCallsEmergStable – A snapshot of the total number of emergency stable calls currently up on the SBC. Stable Calls are defined as calls that are fully stable – connected and media cutt-through that will survive fail over. This excludes calls in establishing, clearing and updating states, which will not survive switchover.

Note

The following statistics are deprecated:

activeCallsNonUser
stableCallsNonUser
totalCallsNonUser

callDetailStatus

Call Detail Status table which includes following statistics:

General fields:

<unique global call identifier (GCID)>
mediaStreams – Type of media streams (audio, video) in the call.
state – Current state of the call.
callingNumber – Calling Party's E.164 telephone number.
calledNumber – Called Party's E.164 telephone number.
addressTransPerformed – Type of address translation (such as LNP, 800) performed on the called party number, if any.
origCalledNum – Original Called Party number (if an address translation has been performed on the called party).
scenarioType – Call scenario type for this call.
callDuration – Call duration (in seconds) following an answer.
mediaType – Media type for this active call.
iceCallTypes – ICE call types for this call (for example ing-lcl-ICE-LITE, ing-rmt-FULL-ICE, eg-lcl-ICE-LITE, eg-rmt-FULL-ICE.)
egressSessionBandwidthkbps – The current allocated session bandwidth, in Kbps, on the egress leg. If no session bandwidth is used, value is "0".
ingressSessionBandwidthkbps – The current allocated session bandwidth, in Kbps, on the ingress leg. If no session bandwidth is used, value is "0".

Note
The `IceState` for each stream displays as "ST_ICE_COMPLETE" only when remote IP of all the streams in the call are learned.

Media Stream 1:

associatedGcidLegId1 – Call leg ID corresponding to associatedGcid1.
associatedGcid1 – GCID of another call which is associated with this call.

ingressDtlsSrtpStream1 – Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.
ingressMediaStream1IceState – Ingress local ice mode for the ingress MediaStream1.
ingressMediaStream1Bandwidth – Bandwidth allocated for the ingress MediaStream1.
ingressMediaStream1LocalIp – Local signaling IP address for ingress MediaStream1.
ingressMediaStream1LocalPort – Local RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).
ingressMediaStream1RemoteIp – Remote signaling IP address for ingress MediaStream1.
ingressMediaStream1RemotePort – Remote RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).
ingressMediaStream1Security – Security Parameters for the ingress MediaStream1.

egressDtlsSrtpStream1 – Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.
egressMediaStream1IceState – Egress local ice mode for the egress MediaStream1.
egressMediaStream1Bandwidth – Bandwidth allocated for the egress MediaStream1.
egressMediaStream1LocalIp – Local signaling IP address for egress MediaStream1.
egressMediaStream1LocalPort – Local RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).
egressMediaStream1RemoteIp – Remote signaling IP address for egress MediaStream1.
egressMediaStream1RemotePort – Remote RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).
egressMediaStream1Security – Security Parameters for the egress MediaStream1.

Media Stream 2 - 6 (Stream 2 shown):

associatedGcidLegId2 – Call leg ID corresponding to associatedGcid2.
associatedGcid2 – GCID of another call which is associated with this call.

ingressDtlsSrtpStream2 – Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.
ingressMediaStream2Bandwidth – Bandwidth allocated for the ingress MediaStream2.
ingressMediaStream2IceState – Ingress local ice mode for the ingress MediaStream2.
ingressMediaStream2LocalIpSockAddr – Local signaling IP address for the ingress MediaStream2.
ingressMediaStream2RemoteIpSockAddr – Remote signaling IP address for the ingress MediaStream2.
ingressMediaStream2Security – Security Parameters for the ingress MediaStream2.

egressDtlsSrtpStream2 – Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.
egressMediaStream2Bandwidth – Bandwidth allocated for the egress MediaStream2.
egressMediaStream2IceState – Egress local ice mode for the egress MediaStream2.
egressMediaStream2LocalIpSockAddr – Local signaling IP address for the egress MediaStream2.
egressMediaStream2RemoteIpSockAddr – Remote signaling IP address for the egress MediaStream2.
egressMediaStream2Security – Security Parameters for the egress MediaStream2.

Note

The following statistics are deprecated:

ingressMediaStream1LocalIpSockAddr
ingressMediaStream1RemoteIpSockAddr

callMediaStatus

callResourceDetailStatus Call Resource Detail Status Table.

callSummaryStatus Call Summary status table.

dtlsSrtpStatistics

DTLS-SRTP negotiation statistics.

clientAuthFailures – The number of times peer failed DTLS authentication with SBC as the client.
currentClientConnections – The number of client sessions currently active.
currentServerConnections – The number of server sessions currently active.
fatelAlertsReceived – The number of FATAL Alerts received.
fingerprintMismatch – The finger print miss match.
handshakeFailures – The cumulative total of all handshake failures.
handshakeTimeouts – The number of handshakes that timed out before completing.
noCipherSuite – The number of handshake failures due to inability to converge on a cipher suite.
noClientCert – The number times we were the client and we failed to derive a certificate to send the server.
noSrtpProfile – The absence of the Srtp Profile.
receiveFailures – The number of receive failures (failure to decrypt).
sendFailures – The number of send failures (failure to encrypt).
serverAuthFailures – The number of times peer failed DTLS authentication with SBC as the server.
sessionResumptions – The number of server sessions that have been resumed.
successfulClientHandshakes – The number of complete client handshakes.
successfulServerHandshakes – The number of complete server handshakes.
totalClientSessions – The cumulative total number of client sessions.
totalServerSessions – The cumulative total number of server sessions.
versionMismatch – The number of failed version miss match.
warningAlertsReceived – The number of WARNING Alerts received.

globalTrunkGroupStatus

Status for IP trunk groups in this zone.

addressContext – The name of address context for this trunk group.
bwAvailable – The amount of bandwidth available for allocation. (Kbits/second)
bwCurrentLimit – The current bandwidth limit for this IP trunk group. (Kbits/second)
bwInboundUsage – The amount of bandwidth in use for inbound traffic. (Kbits/second)
bwOutboundUsage – The amount of bandwidth in use for outbound traffic. (Kbits/second)
inboundCallsUsage – Number of inbound calls for IP trunk groups configured for inbound or both directions.
outboundCallsUsage – Number of non-priority outbound calls for this IP trunk group.
packetOutDetectState – The packet outage detection state.
priorityCallUsage – Number of priority calls for IP trunk groups configured with callReservation state enabled.
state – Current operational state of the IP trunk group.
totalCallsAvailable – The sum of all available or unblocked calls for this trunk group.
totalCallsConfigured – The total number of calls that are configured on this IP trunk group.
totalCallsInboundReserved – Total number of inbound calls reserved for IP trunk groups configured for inbound or both directions only.
totalOutboundCallsReserved – Total number of outbound calls reserved for IP trunk groups that are configured for incoming call reservation.
zone – The name of zone for this trunk group.

icmpGeneralGroupStatistics

The collection of ICMP General Group information for the specified instance.

<server name> – Name of the server.
inDestUnreachs – The number of ICMP Destination Unreachable messages received.
inEchoReps – The number of ICMP Echo Reply messages received.
inEchos – The number of ICMP Echo (request) messages received.
inErrors – The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
inMsgs – The total number of ICMP messages which the entity received.
outDestUnreachs – The number of ICMP Destination Unreachable messages sent.
outEchoReps – The number of ICMP Echo Reply messages sent.
outEchos – The number of ICMP Echo (request) messages sent.
outErrors – The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
outMsgs – The total number of ICMP messages which this entity attempted to send.

ipGeneralGroupStatistics

The collection of IP General Group information for the specified instance.

<server name> – Name of the server.
fragFails – The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their 'Don't Fragment' flag was set.
fragOKs – The number of IP datagrams that have been successfully fragmented at this entity.
inAddrErrors – The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
inDelivers – The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
inDiscards – The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space).
inHdrErrors – The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
inReceives – The total number of input datagrams received from interfaces, including those received in error.
inUnknownProtos – The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
outDiscards – The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space).
outNoRoutes – The number of IP datagrams discarded because no route could be found to transmit them to their destination.
outRequests – The total number of IP datagrams which local IP user- protocols (including ICMP) supplied to IP in requests for transmission.
reasmFails – The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc).
reasmOKs – The number of IP datagrams successfully re-assembled.
reasmReqds – The number of IP fragments received which needed to be reassembled at this entity.
reasmTimeout – The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

monitorEndpointStatus The status of the MCT setting.

monitorTargetStatus The status of the monitor target

ocsCallCountStatus

Call count statistics for the server.

attemptedCall – Total Number of OCS attempted Calls.
establishedCalls – Total Number of OCS Establised Calls.
failedCalls – Total Number of OCS Failed Calls.
pendingCalls – Total Number of OCS Pending Calls.
rejectedCalls – Total Number of OCS rejected Calls.
relayedCall – Total Number of OCS Relayed Calls.
successfulCalls – Total Number of OCS successful Calls.

policyServer

Policy Server Statistics.

CdDNBasedDestAllowedTable – The Traffic Management related counters for allowed called DN based destination
CdDNBasedDestBlockedTable – The Traffic Management related counters for blocked called DN based destination.
contractorBasedOrigAllowedTable – The Traffic Management related counters for allowed contractor number based origination.
contractorBasedOrigBlockedTable – The Traffic Management related counters for blocked contractor number based origination.
dialedDestAllowedTable – The Traffic Management related counters for allowed dialed destination number.
dialedDestBlockedTable – The Traffic Management related counters for blocked dialed destination number.
dnsEnumCounters – Policy DNS ENUM query counters
failureCounters – Policy failure counters
finalCallingNumberAllowedTable – The Traffic Management related counters for allowed final calling number.
finalCallingNumberBlockedTable – he Traffic Management related counters for blocked final calling number.
finalDestAllowedTable – The Traffic Management related counters for allowed final destination number.
finalDestBlockedTable – The Traffic Management related counters for blocked final destination number.
hpcCallsPerGsxTable – The Ingress PSTN HPC Calls related counters per GSX table.
hpcExemptionGsxTable – The Traffic Management HPC Exemption related counters per GSX table.
lnpGsxTable – The LNP related counters per GSX table.
lnpTfCounters – Policy LNP and toll-free counters
mwiServiceCounters – Policy Message Waiting Indicator service counters
originationAllowedTable – The number of calls for which a origination number with a provisioned Traffic control was allowed to complete.
originationBlockedTable – The number of calls for which a origination number with a provisioned Traffic control was blocked.
policyReqCounters – Policy request counters
serviceUsageCounters – Policy service usage counters
sipCounters – Policy SIP message counters
sipE911Counters – Policy E911 service counters
translatedDestAllowedTable – The Traffic Management related counters for allowed translated destination number.
translatedDestBlockedTable – The Traffic Management related counters for blocked translated destination number.

tcpGeneralGroupStatistics

The collection of TCP General Group information for the specified instance.

clientConnections – The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSE state.
establishedConnections – The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
failedAttempts – The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
inErrors – The total number of segments received in error (e.g., bad TCP checksums).
inResets – The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
inSegments – The total number of segments received, including those received in error.
outResets – The number of TCP segments sent containing the RST flag.
outSegments – The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
retransSegments – The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
serverConnections – The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

udpGeneralGroupStatistics

The collection of UDP General Group information for the specified instance.

inDatagrams – The total number of UDP datagrams delivered to UDP users.
inErrors – The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
outDatagrams – The total number of UDP datagrams sent from this entity.
unknownPorts – The total number of received UDP datagrams for which there was no application at the destination port.

Caption

0	Table
1	Command Parameters - 'show table global' only

Parameter	Description
`callRouting`	Global Call Routing objects. `route` – Route statistics: Element Type Element ID1 Element ID2 Routing Type Destination National Destination Country Call Type Digit Type Range Profile Filter Profile Domain Name Routing Label `routingLabel` – Routing Label statistics: Name Overflow Number Overflow NOA Overflow NPI Route Prioritization Type Route Prioritization Type For Equal Cost Routes Script Action Num Routes Per Call Sequence Trunk Group IP Peer Proportion Cost In Service Testing
`callTrace`	Call Trace group configuration for the Node. `callFilter` – This table contains call trace filters for the node. `callTraceTimer` – The call trace timer value. `errorFilter` – The error filter to apply system wide. `maxTriggerCount` – The trigger count for both call and error trace filters. `signalingPacketCapture` – This entry contains signaling packet capture devices and admin state.
`carrier`	Carrier definitions. `<id>` – A unique identifier for this carrier. `services classOfService` – Class of service associated with this carrier.
`country`	Country definitions. `<id>` – A unique country identifier. `listOfNumberOfDigitsToMatch` – List of digit lengths in called/calling numbers for pattern matching. `called` – List of digit lengths (comma-separated) in Called Number for pattern matching. `calling` – List of digit lengths (comma-separated) in Calling Number for pattern matching. `criteria` – List of digit lengths (comma-separated) in Called Number for pattern matching when determining if number translation is required. `variableLengthDialPlan` – Indicates whether a variable length dial plan is enabled or disabled.
`license`	`sessionThreshold` – The current threshold limit for the number of licensed sessions.
`monitorEndpoint`	The current monitor endpoint (MCT) settings. Fields include: `Name` `Trunk Group` `IP Address` `Port Number` `State`
`monitorTarget`	The current monitor target settings. Fields include: `name` – Target name. `gcid` – The target GCID (Global Call Identifier) to tap. `monitorEndpoint` – Name of endpoint to use for recording `monitorLeg` – Specifies which leg to tap (all, both, egress, ingress) `duration` – The duration (in seconds) that the monitor target is tapped. `state` – Administrative state of the monitor target configuration
`npaNxx <npaNxx code>`	National destination code settings. The fields include: `national` – National destination code `portedFlag` – The portedFlag state
`qoeCallRouting`	QoS-based call routing table. `mediaQosBasedRouting` – The status of the flag for Media QoS KPI calculation and validation `signalingQosBasedRouting` – The status of the flag for Signaling QoS KPI calculation and validation
`script`	List of pre-seeded scripts used for call control. The fields include: `<script name>` `description` `majorVersion` `minorVersion`
`security ipsec`	System-wide IPSec settings. `ikeRetransmitCount` – Ike Message retransmission count `ikeRetransmitInterval` – Ike Message retransmission interval in seconds
`servers`	Global configuration details for ENUM and E911 servers. `dns` – DNS Global configuration parameters `iterationCount` – The global Iteration count limit for DNS iterations of server requests. `monitoringInterval` – The global monitoring interval (in secs) for DNS Servers. `probeInterval` – The global probe interval (in secs) for blacklisted DNS Servers. `retransmissionCount` – The global retransmission count limit for DNS iterations of server requests. `retransmissionTimer` – The global retransmission timer value for DNS iterations of server requests. `timeouts` – The global number of timeouts for blacklisting a DNS Server. `e911` – Enhanced 911 service `e911VpcDevice` – E911 VPC Device. `enumDomain` – ENUM configuration for a domain. `enumService` – ENUM service (lnp, cnam, sipAor)
`signaling`	Global Signaling objects `gwSigTimers` – This table contains information about GW Signaling Timers for the node. `congRelDelay` – The amount of time (in seconds) that a call which is rejected due to congestion will be delayed before the release is issued. `establish` – The Gateway Signal Channel Establishment Timer (in seconds.) This value applies to all signal channels `idle` – The amount of time (in hours) a GW Signaling Link May be idle before it is taken down. `keepalive` – This is the Gateway Signal Channel Keepalive Timer (in seconds.) This value applies to all signal channels `retry` – The amount of time (in minutes) the GSX will continue to attempt to recover a GW Signaling Link as long as there are stable calls up `h323SigTimers` – Global H323 Signaling Timers configuration `establish` – H225 signal channel establishment timer (in seconds) `t301` – T301 call timer (in seconds) `t302` – T302 call timer (in seconds) `t303` – T303 call timer (in seconds) `t304` – The T304 call timer (in seconds) `t310` – T310 call timer (in seconds) `tcpConnect` – TCP connect timer (in seconds) `sipPeerOverloadControl` – Global SIP Peer Overload configuration. `discardPeriod` – Discard period (in seconds) for the Peer Overload back-off algorithm. `rejectThreshold` – Reject threshold (in rejects/sec) for the Peer Overload back-off algorithm. `samplingPeriod` – Sampling period (in seconds) for the Peer Overload back-off algorithm. `stepDownGain` – Step down gain for the Peer Overload back-off algorithm. `sipSigControls` – Global SIP Signaling Control settings. `egressRNParam` – Flag to enable/disable sending RN parameter on egress. `loopDetectionFeature` – Flag to perform SIP loop detection on SIP INVITEs as described in RFC3261. `maxPduSizeValue` – The maximum SIP PDU size. `multipleContactsPerAor` – Flag to support multiple different contacts for same AoR. `registrarSupportContactParam` – Flag to determine if the registrar supports contact parameters and will echo such parameters in the RURI. `sendSurrogateUnRegAfterReboot` – Flag to use surrogate registration feature after reboot `suppressErrorInfoHdr` – Flag to suppress the Error-Info header in a 400 response. `surrogateRegisterPacingTime` – The time gap (in milliseconds) between a final response of surrogate register and next surrogate register message sent across all peers. `ucidNodeId` – UCID Node Id to be used to generate UCID in the User-to-User Header.
`sipDomain`	SIP Domain name.
`subscriber`	Subscriber configuration settings. `ID` – Unique identifier for Subscriber. `country` – Country in which the subscriber resides. `owningCarrier` – A 3 or 4-digit Carrier ID number that represents the Carrier who owns the subscriber. Each Carrier can have specific services configured for Subscriber calling numbers. `packetServiceProfile` – The packet service profile used to override the IP trunk groups packet service profile. `classOfService` – Class of service assigned to the subscriber.

...

callCountCurrentStatistics

The number of active and stable sessions over a configured interval of time.

name– A dummy key used during collection of statics. Ignore this field.
callCount – The maximum¹ number of stable calls since SBC booted/rebooted.

callCountIntervalStatistics

The number of active and stable sessions for one or more intervals.

number – A sequence number identifying the statistics interval collected during the interval period.
name – A dummy key used during collection of statics. Ignore this field.
intervalValid – A value of "true" indicates this interval is valid.
time – The system up-time during which the interval statistic was collected.
callCount – The maximum¹ number of stable calls for a configured interval of time.

Info

icon	false

1: Currently, only the maximum session count is supported.

callCountStatus

Call count statistics for the server; cumulative count since boot. Results include following fields:

activeCalls – A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing).
callAttempts – Number of call attempts on this server.
callCompletions – Total number of call attempts that were completed on this server.
callUpdates – Total number of call updates (re-INVITES or any other triggers that result in call transitioning to transient state/stable state).
stableCalls – Current number of stable managed calls on this server.
totalCalls (see activeCalls definition above).
totalCallsEmergEstablishing – A snapshot of the total number of emergency calls currently in the 'establishing' state.
totalCallsEmergStable – A snapshot of the total number of emergency stable calls currently up on the SBC. Stable Calls are defined as calls that are fully stable – connected and media cutt-through that will survive fail over. This excludes calls in establishing, clearing and updating states, which will not survive switchover.

Note

The following statistics are deprecated:

activeCallsNonUser
stableCallsNonUser
totalCallsNonUser

callDetailStatus

See Call Detail Status Statistics table for details.

callMediaStatus See Call Media Status Statistics table for details.

callResourceDetailStatus Call Resource Detail Status Table.

callSummaryStatus Call Summary status table.

dtlsSrtpStatistics

DTLS-SRTP negotiation statistics.

clientAuthFailures – The number of times peer failed DTLS authentication with SBC as the client.
currentClientConnections – The number of client sessions currently active.
currentServerConnections – The number of server sessions currently active.
fatelAlertsReceived – The number of FATAL Alerts received.
fingerprintMismatch – The finger print miss match.
handshakeFailures – The cumulative total of all handshake failures.
handshakeTimeouts – The number of handshakes that timed out before completing.
noCipherSuite – The number of handshake failures due to inability to converge on a cipher suite.
noClientCert – The number times we were the client and we failed to derive a certificate to send the server.
noSrtpProfile – The absence of the Srtp Profile.
receiveFailures – The number of receive failures (failure to decrypt).
sendFailures – The number of send failures (failure to encrypt).
serverAuthFailures – The number of times peer failed DTLS authentication with SBC as the server.
sessionResumptions – The number of server sessions that have been resumed.
successfulClientHandshakes – The number of complete client handshakes.
successfulServerHandshakes – The number of complete server handshakes.
totalClientSessions – The cumulative total number of client sessions.
totalServerSessions – The cumulative total number of server sessions.
versionMismatch – The number of failed version miss match.
warningAlertsReceived – The number of WARNING Alerts received.

globalTrunkGroupStatus

Status for IP trunk groups in this zone.

addressContext – The name of address context for this trunk group.
bwAvailable – The amount of bandwidth available for allocation. (Kbits/second)
bwCurrentLimit – The current bandwidth limit for this IP trunk group. (Kbits/second)
bwInboundUsage – The amount of bandwidth in use for inbound traffic. (Kbits/second)
bwOutboundUsage – The amount of bandwidth in use for outbound traffic. (Kbits/second)
inboundCallsUsage – Number of inbound calls for IP trunk groups configured for inbound or both directions.
outboundCallsUsage – Number of non-priority outbound calls for this IP trunk group.
packetOutDetectState – The packet outage detection state.
priorityCallUsage – Number of priority calls for IP trunk groups configured with callReservation state enabled.
state – Current operational state of the IP trunk group.
totalCallsAvailable – The sum of all available or unblocked calls for this trunk group.
totalCallsConfigured – The total number of calls that are configured on this IP trunk group.
totalCallsInboundReserved – Total number of inbound calls reserved for IP trunk groups configured for inbound or both directions only.
totalOutboundCallsReserved – Total number of outbound calls reserved for IP trunk groups that are configured for incoming call reservation.
zone – The name of zone for this trunk group.

icmpGeneralGroupStatistics

The collection of ICMP General Group information for the specified instance.

<server name> – Name of the server.
inDestUnreachs – The number of ICMP Destination Unreachable messages received.
inEchoReps – The number of ICMP Echo Reply messages received.
inEchos – The number of ICMP Echo (request) messages received.
inErrors – The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
inMsgs – The total number of ICMP messages which the entity received.
outDestUnreachs – The number of ICMP Destination Unreachable messages sent.
outEchoReps – The number of ICMP Echo Reply messages sent.
outEchos – The number of ICMP Echo (request) messages sent.
outErrors – The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
outMsgs – The total number of ICMP messages which this entity attempted to send.

ipGeneralGroupStatistics

The collection of IP General Group information for the specified instance.

<server name> – Name of the server.
fragFails – The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their 'Don't Fragment' flag was set.
fragOKs – The number of IP datagrams that have been successfully fragmented at this entity.
inAddrErrors – The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
inDelivers – The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
inDiscards – The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space).
inHdrErrors – The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
inReceives – The total number of input datagrams received from interfaces, including those received in error.
inUnknownProtos – The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
outDiscards – The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space).
outNoRoutes – The number of IP datagrams discarded because no route could be found to transmit them to their destination.
outRequests – The total number of IP datagrams which local IP user- protocols (including ICMP) supplied to IP in requests for transmission.
reasmFails – The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc).
reasmOKs – The number of IP datagrams successfully re-assembled.
reasmReqds – The number of IP fragments received which needed to be reassembled at this entity.
reasmTimeout – The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

monitorEndpointStatus The status of the MCT setting.

monitorTargetStatus The status of the monitor target

ocsCallCountStatus

Call count statistics for the server.

attemptedCall – Total Number of OCS attempted Calls.
establishedCalls – Total Number of OCS Establised Calls.
failedCalls – Total Number of OCS Failed Calls.
pendingCalls – Total Number of OCS Pending Calls.
rejectedCalls – Total Number of OCS rejected Calls.
relayedCall – Total Number of OCS Relayed Calls.
successfulCalls – Total Number of OCS successful Calls.

policyServer

Policy Server Statistics.

CdDNBasedDestAllowedTable – The Traffic Management related counters for allowed called DN based destination
CdDNBasedDestBlockedTable – The Traffic Management related counters for blocked called DN based destination.
contractorBasedOrigAllowedTable – The Traffic Management related counters for allowed contractor number based origination.
contractorBasedOrigBlockedTable – The Traffic Management related counters for blocked contractor number based origination.
dialedDestAllowedTable – The Traffic Management related counters for allowed dialed destination number.
dialedDestBlockedTable – The Traffic Management related counters for blocked dialed destination number.
dnsEnumCounters – Policy DNS ENUM query counters
failureCounters – Policy failure counters
finalCallingNumberAllowedTable – The Traffic Management related counters for allowed final calling number.
finalCallingNumberBlockedTable – he Traffic Management related counters for blocked final calling number.
finalDestAllowedTable – The Traffic Management related counters for allowed final destination number.
finalDestBlockedTable – The Traffic Management related counters for blocked final destination number.
hpcCallsPerGsxTable – The Ingress PSTN HPC Calls related counters per GSX table.
hpcExemptionGsxTable – The Traffic Management HPC Exemption related counters per GSX table.
lnpGsxTable – The LNP related counters per GSX table.
lnpTfCounters – Policy LNP and toll-free counters
mwiServiceCounters – Policy Message Waiting Indicator service counters
originationAllowedTable – The number of calls for which a origination number with a provisioned Traffic control was allowed to complete.
originationBlockedTable – The number of calls for which a origination number with a provisioned Traffic control was blocked.
policyReqCounters – Policy request counters
serviceUsageCounters – Policy service usage counters
sipCounters – Policy SIP message counters
sipE911Counters – Policy E911 service counters
translatedDestAllowedTable – The Traffic Management related counters for allowed translated destination number.
translatedDestBlockedTable – The Traffic Management related counters for blocked translated destination number.

tcpGeneralGroupStatistics

The collection of TCP General Group information for the specified instance.

clientConnections – The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSE state.
establishedConnections – The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
failedAttempts – The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
inErrors – The total number of segments received in error (e.g., bad TCP checksums).
inResets – The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
inSegments – The total number of segments received, including those received in error.
outResets – The number of TCP segments sent containing the RST flag.
outSegments – The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
retransSegments – The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
serverConnections – The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

udpGeneralGroupStatistics

The collection of UDP General Group information for the specified instance.

inDatagrams – The total number of UDP datagrams delivered to UDP users.
inErrors – The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
outDatagrams – The total number of UDP datagrams sent from this entity.
unknownPorts – The total number of received UDP datagrams for which there was no application at the destination port.

Call Detail Status Statistics

Caption

0	Table
1	Call Detail Status Statistics
3	Call Detail Status Statistics

Statistic Description

General Fields:

<GCID>

Unique global call identifier (GCID).

mediaStreams Type of media streams (audio, video) in the call.

state Current state of the call.

callingNumber Calling Party's E.164 telephone number.

calledNumber Valled Party's E.164 telephone number.

addressTransPerformed Type of address translation (such as LNP, 800) performed on the called party number, if any.

origCalledNum Original Called Party number (if an address translation has been performed on the called party).

scenarioType Call scenario type for this call.

callDuration Call duration (in seconds) following an answer.

mediaType Media type for this active call.

iceCallTypes ICE call types for this call (for example ing-lcl-ICE-LITE, ing-rmt-FULL-ICE, eg-lcl-ICE-LITE, eg-rmt-FULL-ICE.)

egressSessionBandwidthkbps The current allocated session bandwidth, in Kbps, on the egress leg. If no session bandwidth is used, value is "0".

ingressSessionBandwidthkbps

The current allocated session bandwidth, in Kbps, on the ingress leg. If no session bandwidth is used, value is "0".

Note
The `IceState` for each stream displays as "ST_ICE_COMPLETE" only when remote IP of all the streams in the call are learned.

Media Stream 1:

associatedGcidLegId1 Call leg ID corresponding to associatedGcid1.

associatedGcid1 GCID of another call which is associated with this call.

ingressDtlsSrtpStream1 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.

ingressMediaStream1IceState Ingress local ice mode for the ingress MediaStream1.

ingressMediaStream1Bandwidth Bandwidth allocated for the ingress MediaStream1.

ingressMediaStream1LocalIp Local signaling IP address for ingress MediaStream1.

ingressMediaStream1LocalPort Local RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).

ingressMediaStream1RemoteIp Remote signaling IP address for ingress MediaStream1.

ingressMediaStream1RemotePort Remote RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).

ingressMediaStream1Security Security Parameters for the ingress MediaStream1.

egressDtlsSrtpStream1 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.

egressMediaStream1IceState Egress local ice mode for the egress MediaStream1.

egressMediaStream1Bandwidth Bandwidth allocated for the egress MediaStream1.

egressMediaStream1LocalIp Local signaling IP address for egress MediaStream1.

egressMediaStream1LocalPort Local RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).

egressMediaStream1RemoteIp Remote signaling IP address for egress MediaStream1.

egressMediaStream1RemotePort Remote RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).

egressMediaStream1Security Security Parameters for the egress MediaStream1.

Media Stream 2 - 6 (Stream 2 shown):

associatedGcidLegId2 Call leg ID corresponding to associatedGcid2.

associatedGcid2 GCID of another call which is associated with this call.

ingressDtlsSrtpStream2 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.

ingressMediaStream2Bandwidth Bandwidth allocated for the ingress MediaStream2.

ingressMediaStream2IceState Ingress local ice mode for the ingress MediaStream2.

ingressMediaStream2LocalIpSockAddr Local signaling IP address for the ingress MediaStream2.

ingressMediaStream2RemoteIpSockAddr Remote signaling IP address for the ingress MediaStream2.

ingressMediaStream2Security Security Parameters for the ingress MediaStream2.

egressDtlsSrtpStream2 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.

egressMediaStream2Bandwidth Bandwidth allocated for the egress MediaStream2.

egressMediaStream2IceState Egress local ice mode for the egress MediaStream2.

egressMediaStream2LocalIpSockAddr Local signaling IP address for the egress MediaStream2.

egressMediaStream2RemoteIpSockAddr Remote signaling IP address for the egress MediaStream2.

egressMediaStream2Security Security Parameters for the egress MediaStream2.

Note

The following statistics are deprecated:

ingressMediaStream1LocalIpSockAddr
ingressMediaStream1RemoteIpSockAddr

Call Media Status Statistics

Caption

0	Table
1	Call Media Status Statistics
3	Call Media Status Statistics

Statistic	Description
`egressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of egress MediaStream1 for this call
`egressMediaStream1OctetsReceived`	The number of octets received in egress MediaStream1 for this call
`egressMediaStream1OctetsSent`	The number of octets sent in egress MediaStream1 for this call
`egressMediaStream1PacketLatency`	The packet latency in the egress MediaStream1 for this call
`egressMediaStream1PacketsDiscarded`	The number of packets discarded in egress MediaStream1 for this call
`egressMediaStream1PacketsLost`	The number of packets lost in egress MediaStream1 for this call
`egressMediaStream1PacketsReceived`	The number of packets received in egress MediaStream1 for this call
`egressMediaStream1PacketsSent`	The number of packets sent in egress MediaStream1 for this call
`egressMediaStream1RtcpPacketsReceived`	The number of RTCP packet received in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1RtcpPacketsSent`	The number of RTCP packet sent in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on egress leg
`egressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on egress leg
`egressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on egress leg
`egressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on egress leg
`egressRemPacketsLost`	The number of remote packets lost for this call leg
`egressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on egress leg
`egressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on egress
`ingressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of ingress MediaStream1 for this call
`ingressMediaStream1OctetsReceived`	The number of octets received in ingress MediaStream1 for this call
`ingressMediaStream1OctetsSent`	The number of octets sent in ingress MediaStream1 for this call
`ingressMediaStream1PacketLatency`	The packet latency in the ingress MediaStream1 for this call
`ingressMediaStream1PacketsDiscarded`	The number of packets discarded in ingress MediaStream1 for this call
`ingressMediaStream1PacketsLost`	The number of packets lost in ingress MediaStream1 for this call
`ingressMediaStream1PacketsReceived`	The number of packets received in ingress MediaStream1 for this call
`ingressMediaStream1PacketsSent`	The number of packets sent in ingress MediaStream1 for this call
`ingressMediaStream1RtcpPacketsSent`	The number of RTCP packets sent in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1RtcpPacketsReceived`	The number of RTCP packets received in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on ingress leg
`ingressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on ingress leg
`ingressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on ingress leg
`ingressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on ingress leg
`ingressRemPacketsLost`	The number of remote packets lost for this call leg
`ingressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on ingress leg
`ingressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on ingress leg
`mediaStream1Codec`	The codec for this media stream
`mediaStream1Label`l	The label applied to this media stream

Noprint
Back to Top

Parameters for 'show table global' Only Command

Caption

0	Table
1	Parameters - 'show table global' only

Parameter	Description
`callRouting`	Global Call Routing objects. `route` – Route statistics: Element Type Element ID1 Element ID2 Routing Type Destination National Destination Country Call Type Digit Type Range Profile Filter Profile Domain Name Routing Label `routingLabel` – Routing Label statistics: Name Overflow Number Overflow NOA Overflow NPI Route Prioritization Type Route Prioritization Type For Equal Cost Routes Script Action Num Routes Per Call Sequence Trunk Group IP Peer Proportion Cost In Service Testing
`callTrace`	Call Trace group configuration for the Node. `callFilter` – This table contains call trace filters for the node. `callTraceTimer` – The call trace timer value. `errorFilter` – The error filter to apply system wide. `maxTriggerCount` – The trigger count for both call and error trace filters. `signalingPacketCapture` – This entry contains signaling packet capture devices and admin state.
`carrier`	Carrier definitions. `<id>` – A unique identifier for this carrier. `services classOfService` – Class of service associated with this carrier.
`country`	Country definitions. `<id>` – A unique country identifier. `listOfNumberOfDigitsToMatch` – List of digit lengths in called/calling numbers for pattern matching. `called` – List of digit lengths (comma-separated) in Called Number for pattern matching. `calling` – List of digit lengths (comma-separated) in Calling Number for pattern matching. `criteria` – List of digit lengths (comma-separated) in Called Number for pattern matching when determining if number translation is required. `variableLengthDialPlan` – Indicates whether a variable length dial plan is enabled or disabled.
`license`	`sessionThreshold` – The current threshold limit for the number of licensed sessions.
`monitorEndpoint`	The current monitor endpoint (MCT) settings. Fields include: `Name` `Trunk Group` `IP Address` `Port Number` `State`
`monitorTarget`	The current monitor target settings. Fields include: `name` – Target name. `gcid` – The target GCID (Global Call Identifier) to tap. `monitorEndpoint` – Name of endpoint to use for recording `monitorLeg` – Specifies which leg to tap (all, both, egress, ingress) `duration` – The duration (in seconds) that the monitor target is tapped. `state` – Administrative state of the monitor target configuration
`npaNxx <npaNxx code>`	National destination code settings. The fields include: `national` – National destination code `portedFlag` – The portedFlag state
`qoeCallRouting`	QoS-based call routing table. `mediaQosBasedRouting` – The status of the flag for Media QoS KPI calculation and validation `signalingQosBasedRouting` – The status of the flag for Signaling QoS KPI calculation and validation
`script`	List of pre-seeded scripts used for call control. The fields include: `<script name>` `description` `majorVersion` `minorVersion`
`security ipsec`	System-wide IPSec settings. `ikeRetransmitCount` – Ike Message retransmission count `ikeRetransmitInterval` – Ike Message retransmission interval in seconds
`servers`	Global configuration details for ENUM and E911 servers. `dns` – DNS Global configuration parameters `iterationCount` – The global Iteration count limit for DNS iterations of server requests. `monitoringInterval` – The global monitoring interval (in secs) for DNS Servers. `probeInterval` – The global probe interval (in secs) for blacklisted DNS Servers. `retransmissionCount` – The global retransmission count limit for DNS iterations of server requests. `retransmissionTimer` – The global retransmission timer value for DNS iterations of server requests. `timeouts` – The global number of timeouts for blacklisting a DNS Server. `e911` – Enhanced 911 service `e911VpcDevice` – E911 VPC Device. `enumDomain` – ENUM configuration for a domain. `enumService` – ENUM service (lnp, cnam, sipAor)
`signaling`	Global Signaling objects `gwSigTimers` – This table contains information about GW Signaling Timers for the node. `congRelDelay` – The amount of time (in seconds) that a call which is rejected due to congestion will be delayed before the release is issued. `establish` – The Gateway Signal Channel Establishment Timer (in seconds.) This value applies to all signal channels `idle` – The amount of time (in hours) a GW Signaling Link May be idle before it is taken down. `keepalive` – This is the Gateway Signal Channel Keepalive Timer (in seconds.) This value applies to all signal channels `retry` – The amount of time (in minutes) the GSX will continue to attempt to recover a GW Signaling Link as long as there are stable calls up `h323SigTimers` – Global H323 Signaling Timers configuration `establish` – H225 signal channel establishment timer (in seconds) `t301` – T301 call timer (in seconds) `t302` – T302 call timer (in seconds) `t303` – T303 call timer (in seconds) `t304` – The T304 call timer (in seconds) `t310` – T310 call timer (in seconds) `tcpConnect` – TCP connect timer (in seconds) `sipPeerOverloadControl` – Global SIP Peer Overload configuration. `discardPeriod` – Discard period (in seconds) for the Peer Overload back-off algorithm. `rejectThreshold` – Reject threshold (in rejects/sec) for the Peer Overload back-off algorithm. `samplingPeriod` – Sampling period (in seconds) for the Peer Overload back-off algorithm. `stepDownGain` – Step down gain for the Peer Overload back-off algorithm. `sipSigControls` – Global SIP Signaling Control settings. `egressRNParam` – Flag to enable/disable sending RN parameter on egress. `loopDetectionFeature` – Flag to perform SIP loop detection on SIP INVITEs as described in RFC3261. `maxPduSizeValue` – The maximum SIP PDU size. `multipleContactsPerAor` – Flag to support multiple different contacts for same AoR. `registrarSupportContactParam` – Flag to determine if the registrar supports contact parameters and will echo such parameters in the RURI. `sendSurrogateUnRegAfterReboot` – Flag to use surrogate registration feature after reboot `suppressErrorInfoHdr` – Flag to suppress the Error-Info header in a 400 response. `surrogateRegisterPacingTime` – The time gap (in milliseconds) between a final response of surrogate register and next surrogate register message sent across all peers. `ucidNodeId` – UCID Node Id to be used to generate UCID in the User-to-User Header.
`sipDomain`	SIP Domain name.
`subscriber`	Subscriber configuration settings. `ID` – Unique identifier for Subscriber. `country` – Country in which the subscriber resides. `owningCarrier` – A 3 or 4-digit Carrier ID number that represents the Carrier who owns the subscriber. Each Carrier can have specific services configured for Subscriber calling numbers. `packetServiceProfile` – The packet service profile used to override the IP trunk groups packet service profile. `classOfService` – Class of service assigned to the subscriber.

Noprint
Back to Top

Command Example

Code Block

language	none

> show table global sipRecStatus                
       RECORDER           RX RTP            TX RTP            RECORDING  
GCID   ADDRESS            ADDRESS           ADDRESS           LEG
1      10.11.12.13:5060   10.11.12.13:8000  10.11.12.13:8002  ingress

Code Block

language	none

> show tablestatus global sipRecStatus callDetailStatus
callDetailStatus 786432 {
    mediaStreams                        audio;
    state                   RECORDER           RX RTPStable;
    callingNumber        TX RTP            RECORDING  
GCID67890000;
    calledNumber                 ADDRESS       2345;
    addressTransPerformed ADDRESS           ADDRESS   none;
    origCalledNum    LEG
1      10.11.12.13:5060   10.11.12.13:8000  10.11.12.13:8002  ingress

Code Block

language	none

> show status global callDetailStatus
callDetailStatus 786432 {"";
    mediaStreamsscenarioType                        audioSIP_TO_SIP;
    statecallDuration                        9;
    mediaType   Stable;
    callingNumber                    passthru;
   67890000;
  associatedGcid1  calledNumber                   786432;
    associatedGcid2 2345;
     addressTransPerformed               none786432;
    associatedGcidLegId1 origCalledNum               1;
    associatedGcidLegId2     "";
    scenarioType       0;
    ingressMediaStream1LocalIpSockAddr  "10.54.25.26/ 1024 (rtcp: 1025)";
    ingressMediaStream1RemoteIpSockAddr "10.34.13.243/ 6000  SIP_TO_SIP(rtcp: 6001)";
    egressMediaStream1LocalIpSockAddr   "10.54.27.26/ 1024 callDuration (rtcp: 1025)";
    egressMediaStream1RemoteIpSockAddr  "10.34.13.252/ 6000 (rtcp: 6001)";
    ingressMediaStream1Security          9"rtp-disabled rtcp-disabled";
    mediaTypeegressMediaStream1Security          "rtp-disabled rtcp-disabled";
    ingressMediaStream1Bandwidth            passthru127;
    associatedGcid1egressMediaStream1Bandwidth         127;

Code Block

language	none

> show status global callMediaStatus        786432;
    associatedGcid2
callMediaStatus 786432 {
    mediaStreamsInCall                  786432;
    associatedGcidLegId1    audio;
    ingressMacHeader        1;
    associatedGcidLegId2                64-0-F1-FD-B3-7F;
    ingressMediaStream1LocalIpSockAddr  "10.54.25.26/ 1024 (rtcp: 1025)";
egressMacHeader      ingressMediaStream1RemoteIpSockAddr "10.34.13.243/ 6000 (rtcp: 6001)";
    egressMediaStream1LocalIpSockAddr   "10.54.27.26/ 1024 (rtcp: 1025)";
    egressMediaStream1RemoteIpSockAddr  "10.34.13.252/ 6000 (rtcp: 6001)" 64-0-F1-FD-B3-7F;
    ingressMediaStream1SecurityingressBearerType           "rtp-disabled rtcp-disabled";
    egressMediaStream1Security          "rtp-disabled rtcp-disabled" voice;
    ingressMediaStream1BandwidthegressBearerType        127;
    egressMediaStream1Bandwidth         127;

Code Block

language	none

> show status global callMediaStatus 
callMediaStatus 786432 {voice;
    mediaStreamsInCallingressCfgAudioType                          audioG711;
    ingressMacHeader  egressCfgAudioType                          64-0-F1-FD-B3-7FG711;
    egressMacHeaderingressActAudioType                         na;
    64-0-F1-FD-B3-7F;
egressActAudioType    ingressBearerType                      na;
    ingressRemPacketsLost voice;
    egressBearerType                  0;
    ingressRFactorInbound      voice;
    ingressCfgAudioType             93;
    ingressRFactorOutbound        G711;
    egressCfgAudioType          93;
    egressRemPacketsLost            G711;
    ingressActAudioType        0;
    egressRFactorInbound             na;
    egressActAudioType       93;
    egressRFactorOutbound               na;
    ingressRemPacketsLost    93;
    mediaStream1Label               0;
    ingressRFactorInbound        audio;
    mediaStream1Codec           93;
    ingressRFactorOutbound            G711;
    ingressMediaStream1PacketsSent      93;
    egressRemPacketsLost    518;
    ingressMediaStream1PacketsReceived          518;
    ingressMediaStream1OctetsSent  0;
    egressRFactorInbound         82880;
    ingressMediaStream1OctetsReceived           9383048;
    egressRFactorOutboundingressMediaStream1RtcpPacketsSent          2;
    ingressMediaStream1RtcpPacketsReceived         932;
    mediaStream1LabelingressMediaStream1PacketsLost              0;
    ingressMediaStream1PacketsDiscarded         audio0;
    mediaStream1CodecingressMediaStream1PacketLatency            0;
    ingressMediaStream1InterarrivalJitter       0;
    ingressMediaStream1StunDtlsPacketsReceived  G7110;
    ingressMediaStream1PacketsSentingressMediaStream1StunDtlsPacketsDiscarded 0;
    ingressMediaStream1SrtpAuthFailure          5180;
    ingressMediaStream1PacketsReceivedingressMediaStream1SrtpReplayFailure          5180;
    ingressMediaStream1OctetsSentegressMediaStream1PacketsSent               82880518;
    ingressMediaStream1OctetsReceivedegressMediaStream1PacketsReceived           83048518;
    ingressMediaStream1RtcpPacketsSent  egressMediaStream1OctetsSent        2;
    ingressMediaStream1RtcpPacketsReceived      282880;
    ingressMediaStream1PacketsLostegressMediaStream1OctetsReceived              083056;
    ingressMediaStream1PacketsDiscardedegressMediaStream1RtcpPacketsSent           02;
    ingressMediaStream1PacketLatencyegressMediaStream1RtcpPacketsReceived       2;
     0;
  egressMediaStream1PacketsLost  ingressMediaStream1InterarrivalJitter       0;
    ingressMediaStream1StunDtlsPacketsReceived  0;
    ingressMediaStream1StunDtlsPacketsDiscardedegressMediaStream1PacketsDiscarded 0;
    ingressMediaStream1SrtpAuthFailure     0;
    egressMediaStream1PacketLatency 0;
    ingressMediaStream1SrtpReplayFailure        0;
    egressMediaStream1PacketsSentegressMediaStream1InterarrivalJitter        0;
    egressMediaStream1StunDtlsPacketsReceived   5180;
    egressMediaStream1PacketsReceivedegressMediaStream1StunDtlsPacketsDiscarded  0;
         518;
egressMediaStream1SrtpAuthFailure     egressMediaStream1OctetsSent       0;
    egressMediaStream1SrtpReplayFailure     82880;
    egressMediaStream1OctetsReceived    0;
}

Noprint
Back to Top

Code Block

language	none

> show table global callCountIntervalStatistics
        83056;
    egressMediaStream1RtcpPacketsSent   INTERVAL        2;CALL
NUMBER  NAME  egressMediaStream1RtcpPacketsReceived VALID       2;
TIME  COUNT
--------------------------------------
2    egressMediaStream1PacketsLost   entry  true      1548    0;
 3   egressMediaStream1PacketsDiscarded    entry  true    0;
  2448  egressMediaStream1PacketLatency             0;
4    egressMediaStream1InterarrivalJitter   entry   true  0;
    egressMediaStream1StunDtlsPacketsReceived 3348  0;
5    egressMediaStream1StunDtlsPacketsDiscarded  0;
 entry  true egressMediaStream1SrtpAuthFailure           0;
    egressMediaStream1SrtpReplayFailure         0;
}4248  0

Noprint
Back to Top

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 3

New Version 4

Key

Command Parameters

Common Parameters to 'show status / table global' Commands

Call Detail Status Statistics

Call Media Status Statistics

Parameters for 'show table global' Only Command

Command Example