Page History

...

1. Rack mount the chassis:
   1. Rack Mounting the SBC 5400 Chassis
2. Connect Ethernet and data cables:
   1. Connecting SBC 5400 Ethernet and Data Cables
3. Connect power to SBC and power on:
   1. Connecting Power to SBC 5400 and Powering On

4. Upgrade BMC firmware (if required):

   Note
   Since, this is a fresh installation, BMC Firmware can not be upgraded.

5. Configure SBC platform (BMC, management interfaces, NTP): SBC 5400 - Configuring the Platform 
6. Install SecureLink for Remote Access SBC 5400 - Installing SecureLink for Remote Access 
7. Install Installing 

   Spacevars
   0 model5

   Application. SBC 5400 - Installing Application 
8. Configure 

   Spacevars
   0 model5

   for a basic call flow and make first call. <Add the link here>Refer to the procedure mentioned in How to Set up a Basic Call Flow . The procedure is same for SBC 5400 too.