Page History

...

1. Log on to EMS as admin user.
   
2. Under Network Mgmnt, click Cluster / VNF Management. The Cluster/VNF Management window is displayed.

3. Create S-SBC cluster. For more information, refer to Creating an SBC SWe Cluster.
   

4. Click Configurations tab.

5. Click New Configuration. The New Configuration pane is displayed.

   Caption
   0 Figure 1 New Configuration
   Image Modified

6. Click Master Configurator tab.

7. Select the version of the configuration from the Version drop-down.
   

8. Select SBC Configurator instance from the Master Configurator drop-down.
   This node is used to create the configuration. The SBC Configurator nodes are displayed based on the version selected. Only unlocked SBC Configurator nodes are listed.
   

9. Enter a name for the configuration in the Configuration Name field. The SBC configuration name contain only letters, numbers, dashes (-), apostrophes ('), underscores (_), colons (:) and spaces.
   

   Note
   The cluster ID is set as the default name for the first configuration. You can modify the name. The name must be unique. The subsequent configurations are named with a combination of cluster name and some unique identifying information. The default name varies based on how the configuration is created.

   
   

10. Click Create.
    A circular progress bar is displayed against the Master Configurator node. It takes around six minutes to load master configuration.

    Caption
    0 Figure 1 Configurator Loading

    
    When the Master Configurator node is loaded, the Open Editor button is displayed next to the Master Configurator node.

    Caption
    0 Figure 1 Open Editor

11. Click Open Editor. The SBC Configuration Manager window is displayed. 
    

    Caption
    0 Figure 1 SBC Configuration Manager
    Image Modified

12. Create the basic S-SBC configuration on the SBC configurator. For information on S-SBC configuration, refer to Creating an SBC SWe Cluster.

13. Click Apply Saved Changes and Close. A circular progress bar is displayed.
    

    Caption
    0 Figure 1 Saving Configuration
    Image Modified

    
    The configuration is saved on the EMS SWe and the following window displays:

    Caption
    0 Figure 1 Locked Configurator
    .

14. Create CDC configuration (Proceed to Configuring CDC using EMS CALEA User Account).

...

1. In the SBC Configuration Manager window, navigate to Configuration > Intercept > Call Data Channel. The Call Data Channel window is displayed.

   Caption
   0 Figure 1 Call Data Channel for S-SBC

   Note
   You can configure the LI using the default Address Context only.

2. Select default from Address Context drop-down menu.

   Caption
   0 Figure 1 Call Data Channel for M-SBC

3. Click New Call Data Channel. The Create New Call Data Channel window is displayed.

   Note
   You can configure the LI using the default Address Context only.

4. Specify the following values:

   1. Name: Type the name of the call data channel.

   2. Intercept Standard: Select packetcable from the drop-down menu.

   3. Vendor ID: Select ss8 from the drop-down menu.

      Caption
      0 Figure 1 Create CDC

      Caption
      0 Table 1 Call Data Channel Parameters 3 Parameter Details
      Parameter Description Name Specifies the name of the CDC. Intercept Standard Specifies the intercept standard used. Vendor Id Specifies the vendor of the LI server used.

5. Click Save. The object is created successfully.

6. Click OK.

   Caption
   0 Figure 1 Call Data Channel List
   Image Modified

    

7. Click Apply Saved Changes and Close.

8.  Activate the CDC configuration (Proceed to Activating CDC Configuration for S-SBC).

...