This object allows you to configure SIP Peer Overload Control parameters.
To View and Edit Sip Peer Overload Control
On SBC main screen, go to All > Global > Signaling >Sip Peer Overload Control.
The Sip Peer Overload Control window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Global - Signaling - Sip Peer Overload Control |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Sip Peer Overload Control |
|---|
|
| Parameter | Description |
|---|
Sampling Period
| Specifies the sampling period (in seconds) for the Peer Overload backoff algorithm. The value ranges from 1 to 10 and the default value is 2 seconds. | Discard Period
| Specifies the discard period (in seconds) for the Peer Overload backoff algorithm. The value ranges from 1 to 10 and the default value is 2 seconds. | Step Down Gain
| Specifies the step down gain for the Peer Overload backoff algorithm. The value ranges from 1 to 200 and the default value is 100. | Reject Threshold
| Specifies the reject threshold (in rejects/sec) for the Peer Overload backoff algorithm. The value ranges from 0 to 50 and the default value is 1. |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.