Page History

...

Div

class	excerptdiv

Excerpt

Caption

0	Table
1	Common Parameters - 'show status global' and 'show table global'
3	Common Parameters

Parameter Description

cac

Global CAC objects. See CAC Statistics table below for details.

callCountCurrentStatistics

The number of active and stable sessions over a configured interval of time.

name– A dummy key used during collection of statics. Ignore this field.
callCount – The maximum¹ number of stable calls since SBC booted/rebooted.

callCountIntervalStatistics

The number of active and stable sessions for one or more intervals.

number – A sequence number identifying the statistics interval collected during the interval period.
name – A dummy key used during collection of statics. Ignore this field.
intervalValid – A value of "true" indicates this interval is valid.
time – The system up-time during which the interval statistic was collected.
callCount – The maximum¹ number of stable calls for a configured interval of time.

Info

icon	false

1: Currently, only the maximum session count is supported.

callCountStatus

Call count statistics for the server; cumulative count since boot. Results include following fields:

activeCalls – A snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing).
callAttempts – Number of call attempts on this server.
callCompletions – Total number of call attempts that were completed on this server.
callUpdates – Total number of call updates (re-INVITES or any other triggers that result in call transitioning to transient state/stable state).
stableCalls – Current number of stable managed calls on this server.
totalCalls (see activeCalls definition above).
totalCallsEmergEstablishing – A snapshot of the total number of emergency calls currently in the 'establishing' state.
totalCallsEmergStable – A snapshot of the total number of emergency stable calls currently up on the SBC. Stable Calls are defined as calls that are fully stable – connected and media cuttcut-through that will survive fail over. This excludes calls in establishing, clearing and updating states, which will not survive switchover.

Note

The following statistics are deprecated:

activeCallsNonUser
stableCallsNonUser
totalCallsNonUser

callDetailStatus

See Call Detail Status Statistics table for details.

callMediaStatus See Call Media Status Statistics table for details.

callResourceDetailStatus Call Resource Detail Status Table.

callSummaryStatus Call Summary status table.

dtlsSrtpStatistics

DTLS-SRTP negotiation statistics.

clientAuthFailures – The number of times peer failed DTLS authentication with SBC as the client.
currentClientConnections – The number of client sessions currently active.
currentServerConnections – The number of server sessions currently active.
fatelAlertsReceived – The number of FATAL Alerts received.
fingerprintMismatch – The finger print miss match.
handshakeFailures – The cumulative total of all handshake failures.
handshakeTimeouts – The number of handshakes that timed out before completing.
noCipherSuite – The number of handshake failures due to inability to converge on a cipher suite.
noClientCert – The number times we were the client and we failed to derive a certificate to send the server.
noSrtpProfile – The absence of the Srtp Profile.
receiveFailures – The number of receive failures (failure to decrypt).
sendFailures – The number of send failures (failure to encrypt).
serverAuthFailures – The number of times peer failed DTLS authentication with SBC as the server.
sessionResumptions – The number of server sessions that have been resumed.
successfulClientHandshakes – The number of complete client handshakes.
successfulServerHandshakes – The number of complete server handshakes.
totalClientSessions – The cumulative total number of client sessions.
totalServerSessions – The cumulative total number of server sessions.
versionMismatch – The number of failed version miss match.
warningAlertsReceived – The number of WARNING Alerts received.

globalTrunkGroupStatus

Status for IP trunk groups in this zone.

addressContext – The name of address context for this trunk group.
bwAvailable – The amount of bandwidth available for allocation. (Kbits/second)
bwCurrentLimit – The current bandwidth limit for this IP trunk group. (Kbits/second)
bwInboundUsage – The amount of bandwidth in use for inbound traffic. (Kbits/second)
bwOutboundUsage – The amount of bandwidth in use for outbound traffic. (Kbits/second)
inboundCallsUsage – Number of inbound calls for IP trunk groups configured for inbound or both directions.
outboundCallsUsage – Number of non-priority outbound calls for this IP trunk group.
packetOutDetectState – The packet outage detection state.
priorityCallUsage – Number of priority calls for IP trunk groups configured with callReservation state enabled.
state – Current operational state of the IP trunk group.
totalCallsAvailable – The sum of all available or unblocked calls for this trunk group.
totalCallsConfigured – The total number of calls that are configured on this IP trunk group.
totalCallsInboundReserved – Total number of inbound calls reserved for IP trunk groups configured for inbound or both directions only.
totalOutboundCallsReserved – Total number of outbound calls reserved for IP trunk groups that are configured for incoming call reservation.
zone – The name of zone for this trunk group.

Note
This object is only available in CLI

icmpGeneralGroupStatistics

The collection of ICMP General Group information for the specified instance.

<server name> – Name of the server.
inDestUnreachs – The number of ICMP Destination Unreachable messages received.
inEchoReps – The number of ICMP Echo Reply messages received.
inEchos – The number of ICMP Echo (request) messages received.
inErrors – The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
inMsgs – The total number of ICMP messages which the entity received.
outDestUnreachs – The number of ICMP Destination Unreachable messages sent.
outEchoReps – The number of ICMP Echo Reply messages sent.
outEchos – The number of ICMP Echo (request) messages sent.
outErrors – The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
outMsgs – The total number of ICMP messages which this entity attempted to send.

ipGeneralGroupStatistics

The collection of IP General Group information for the specified instance.

<server name> – Name of the server.
fragFails – The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their 'Don't Fragment' flag was set.
fragOKs – The number of IP datagrams that have been successfully fragmented at this entity.
inAddrErrors – The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
inDelivers – The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
inDiscards – The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space).
inHdrErrors – The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
inReceives – The total number of input datagrams received from interfaces, including those received in error.
inUnknownProtos – The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
outDiscards – The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space).
outNoRoutes – The number of IP datagrams discarded because no route could be found to transmit them to their destination.
outRequests – The total number of IP datagrams which local IP user- protocols (including ICMP) supplied to IP in requests for transmission.
reasmFails – The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc).
reasmOKs – The number of IP datagrams successfully re-assembled.
reasmReqds – The number of IP fragments received which needed to be reassembled at this entity.
reasmTimeout – The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

monitorEndpointStatus The status of the MCT setting.

monitorTargetStatus The status of the monitor target

ocsCallCountStatus

Call count statistics for the server.

attemptedCall – Total Number of OCS attempted Calls.
establishedCalls – Total Number of OCS Establised Calls.
failedCalls – Total Number of OCS Failed Calls.
pendingCalls – Total Number of OCS Pending Calls.
rejectedCalls – Total Number of OCS rejected Calls.
relayedCall – Total Number of OCS Relayed Calls.
successfulCalls – Total Number of OCS successful Calls.

policyServer

Policy Server Statistics.

CdDNBasedDestAllowedTable – The Traffic Management related counters for allowed called DN based destination
CdDNBasedDestBlockedTable – The Traffic Management related counters for blocked called DN based destination.
contractorBasedOrigAllowedTable – The Traffic Management related counters for allowed contractor number based origination.
contractorBasedOrigBlockedTable – The Traffic Management related counters for blocked contractor number based origination.
dialedDestAllowedTable – The Traffic Management related counters for allowed dialed destination number.
dialedDestBlockedTable – The Traffic Management related counters for blocked dialed destination number.
dnsEnumCounters – Policy DNS ENUM query counters
failureCounters – Policy failure counters
finalCallingNumberAllowedTable – The Traffic Management related counters for allowed final calling number.
finalCallingNumberBlockedTable – he Traffic Management related counters for blocked final calling number.
finalDestAllowedTable – The Traffic Management related counters for allowed final destination number.
finalDestBlockedTable – The Traffic Management related counters for blocked final destination number.
hpcCallsPerGsxTable – The Ingress PSTN HPC Calls related counters per GSX table.
hpcExemptionGsxTable – The Traffic Management HPC Exemption related counters per GSX table.
lnpGsxTable – The LNP related counters per GSX table.
lnpTfCounters – Policy LNP and toll-free counters
mwiServiceCounters – Policy Message Waiting Indicator service counters
originationAllowedTable – The number of calls for which a origination number with a provisioned Traffic control was allowed to complete.
originationBlockedTable – The number of calls for which a origination number with a provisioned Traffic control was blocked.
policyReqCounters – Policy request counters
serviceUsageCounters – Policy service usage counters
sipCounters – Policy SIP message counters
sipE911Counters – Policy E911 service counters
translatedDestAllowedTable – The Traffic Management related counters for allowed translated destination number.
translatedDestBlockedTable – The Traffic Management related counters for blocked translated destination number.

signaling

siprecStatus

List of calls being recorded through siprec.

gcid
recorderAddress
rxRtpAddress
txRtpAddress
recordingLeg

tcpGeneralGroupStatistics

The collection of TCP General Group information for the specified instance.

clientConnections – The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSE state.
establishedConnections – The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
failedAttempts – The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
inErrors – The total number of segments received in error (e.g., bad TCP checksums).
inResets – The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
inSegments – The total number of segments received, including those received in error.
outResets – The number of TCP segments sent containing the RST flag.
outSegments – The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
retransSegments – The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
serverConnections – The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

udpGeneralGroupStatistics

The collection of UDP General Group information for the specified instance.

inDatagrams – The total number of UDP datagrams delivered to UDP users.
inErrors – The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
outDatagrams – The total number of UDP datagrams sent from this entity.
unknownPorts – The total number of received UDP datagrams for which there was no application at the destination port.

CAC Statistics

Caption

0	Table
1	CAC Statistics
3	CAC Statistics

Parameter	Description
`sharedCacCurrentStatistics`	The shared CAC-limits pool current statistics. `activeRegs` – The current number of active registrations of this shared CAC-limits pool. `activeSubs` – The current number of active subscriptions on this shared CAC-limits pool. `inBwUsage` – The sum of BW usage (expected data rate in Kbits per second multiplied by call duration in seconds) for every inbound call associated with this shared CAC-limits pool. `maxActiveBwUsage` – The high watermark of BW usage in either direction associated with this shared CAC-limits pool. `maxActiveCalls` – The current high watermark of total number of active calls in both the inbound and outbound directions bound by limits of this shared CAC-limits pool. `maxActiveRegs` – The current high watermark of registrations subject to limits of this shared CAC-limits pool. `maxActiveSubs` – The current number of maximum active subscriptions on this shared CAC-limits pool. `outBwUsage` – The total bandwidth usage for every outbound associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds.
`sharedCacFailureCurStats`	The shared CAC-limits pool current failure statistics. `allocFailBwLimit` – The number of failed bandwidth requests due to this shared CAC-limits pool exceeding the configured bandwidth limit. `allocFailCallLimit` – The number of failed call requests due to this shared CAC-limits pool exceeding the configured call limit. `allocFailParentConstraint` – The current number of failures due to a parent limit denial. `allocFailSipReg` – The current number of failed SIP registration attempts due to this shared CAC-limits pool exceeding the configured registration limit. `sipOtherReqFailPolicing` – The current number of failed SIP other non-INVITE attempts due to policing on this shared CAC-limits pool. `sipSubsFailPolicing` – The current number of failed SIP Subscribe attempts due to policing on this shared CAC-limits pool. `videoThresholdLimit` – The number of video streams that exceeded the threshold limit for this shared CAC-limits pool.
`sharedCacFailureIntStats`	The shared CAC-limits pool interval failure statistics. `allocFailBwLimit` – The number of failed bandwidth requests due to this shared CAC-limits pool exceeding the configured bandwidth limit for the specified interval. `allocFailCallLimit` – The number of failed call requests due to this shared CAC-limits pool exceeding the configured call limit for the specified interval. `allocFailParentConstraint` – The current number of failures due to a parent limit denial for the specified interval. `allocFailSipReg` – The current number of failed SIP registration attempts due to this shared CAC-limits pool exceeding the configured registration limit for the specified interval. `sipOtherReqFailPolicing` – The current number of failed SIP other non-INVITE attempts due to policing on this shared CAC-limits pool for the specified interval. `sipSubsFailPolicing` – The current number of failed SIP Subscribe attempts due to policing on this shared CAC-limits pool for the specified interval. time – The system up-time when this interval statistic is collected. `videoThresholdLimit` – The number of video streams that exceeded the threshold limit for this shared CAC-limits pool for the specified interval.
`sharedCacIntervalStatistics`	The shared CAC-limits pool statistics for the specified interval. `activeRegs` – The number of active registrations of this shared CAC-limits pool for the specified interval. `activeSubs` – The number of active subscriptions on this shared CAC-limits pool for the specified interval. `inBwUsage` – The total bandwidth usage for every inbound call associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds. `intervalValid` – A value of "true" indicates this interval is valid. `maxActiveBwUsage` – The high watermark of bandwidth usage in either direction associated with this shared CAC-limits pool for the specified interval. `maxActiveCalls` – The high watermark of total number of active calls in both the inbound and outbound directions bound by limits of this shared CAC-limits pool for the specified interval. `maxActiveRegs` – The high watermark of registrations subject to limits of this shared CAC-limits pool for the specified interval. `maxActiveSubs` – The number of maximum active subscriptions on this shared CAC-limits pool for the specified interval. `outBwUsage` – The total bandwidth usage for every outbound associated with this shared CAC-limits pool using the formula: expected data rate in Kbits per second multiplied by call duration in seconds. `time` – The system up-time when this interval statistic is collected.
`sharedCacStatus`	Current status of the shared CAC-limits pool. `bwAvailable` – The amount of bandwidth available for allocation. `bwInboundUsage` – The amount of bandwidth in use for inbound traffic. `bwOutboundUsage` – The amount of bandwidth in use for outbound traffic. `inboundCallsUsage` – The current inbound or incoming usage on this shared CAC-limits pool. `outboundCallsUsage` – The current outbound, non-priority usage on this shared CAC-limits pool. `sipRegActive` – The number of active SIP registrations on this shared CAC-limits pool. `sipSubsActive` – The number of active SIP subscriptions on this shared CAC-limits pool. `totalCallsAvailable` – The sum total of all available calls on this shared CAC-limits pool.

Call Detail Status Statistics

Caption

0	Table
1	Call Detail Status Statistics
3	Call Detail Status Statistics

Statistic Description

General Fields:

<GCID>

Unique global call identifier (GCID).

mediaStreams Type of media streams (audio, video) in the call.

state Current state of the call.

callingNumber Calling Party's E.164 telephone number.

calledNumber Valled Party's E.164 telephone number.

addressTransPerformed Type of address translation (such as LNP, 800) performed on the called party number, if any.

origCalledNum Original Called Party number (if an address translation has been performed on the called party).

scenarioType Call scenario type for this call.

callDuration Call duration (in seconds) following an answer.

mediaType Media type for this active call.

iceCallTypes ICE call types for this call (for example ing-lcl-ICE-LITE, ing-rmt-FULL-ICE, eg-lcl-ICE-LITE, eg-rmt-FULL-ICE.)

egressSessionBandwidthkbps The current allocated session bandwidth, in Kbps, on the egress leg. If no session bandwidth is used, value is "0".

ingressSessionBandwidthkbps

The current allocated session bandwidth, in Kbps, on the ingress leg. If no session bandwidth is used, value is "0".

Note
The `IceState` for each stream displays as "ST_ICE_COMPLETE" only when remote IP of all the streams in the call are learned.

Media Stream 1:

associatedGcidLegId1 Call leg ID corresponding to associatedGcid1.

associatedGcid1 GCID of another call which is associated with this call.

ingressDtlsSrtpStream1 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.

ingressMediaStream1IceState Ingress local ice mode for the ingress MediaStream1.

ingressMediaStream1Bandwidth Bandwidth allocated for the ingress MediaStream1.

ingressMediaStream1LocalIp Local signaling IP address for ingress MediaStream1.

ingressMediaStream1LocalPort Local RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).

ingressMediaStream1RemoteIp Remote signaling IP address for ingress MediaStream1.

ingressMediaStream1RemotePort Remote RTCP port for ingress MediaStream1 (If RTCP is enabled for this call leg).

ingressMediaStream1Security Security Parameters for the ingress MediaStream1.

egressDtlsSrtpStream1 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.

egressMediaStream1IceState Egress local ice mode for the egress MediaStream1.

egressMediaStream1Bandwidth Bandwidth allocated for the egress MediaStream1.

egressMediaStream1LocalIp Local signaling IP address for egress MediaStream1.

egressMediaStream1LocalPort Local RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).

egressMediaStream1RemoteIp Remote signaling IP address for egress MediaStream1.

egressMediaStream1RemotePort Remote RTCP port for egress MediaStream1 (If RTCP is enabled for this call leg).

egressMediaStream1Security Security Parameters for the egress MediaStream1.

Media Stream 2 - 6 (Stream 2 shown):

associatedGcidLegId2 Call leg ID corresponding to associatedGcid2.

associatedGcid2 GCID of another call which is associated with this call.

ingressDtlsSrtpStream2 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the ingress call.

ingressMediaStream2Bandwidth Bandwidth allocated for the ingress MediaStream2.

ingressMediaStream2IceState Ingress local ice mode for the ingress MediaStream2.

ingressMediaStream2LocalIpSockAddr Local signaling IP address for the ingress MediaStream2.

ingressMediaStream2RemoteIpSockAddr Remote signaling IP address for the ingress MediaStream2.

ingressMediaStream2Security Security Parameters for the ingress MediaStream2.

egressDtlsSrtpStream2 Identifies whether DTLS-SRTP negotiation is enabled or disabled for the corresponding stream of the egress call.

egressMediaStream2Bandwidth Bandwidth allocated for the egress MediaStream2.

egressMediaStream2IceState Egress local ice mode for the egress MediaStream2.

egressMediaStream2LocalIpSockAddr Local signaling IP address for the egress MediaStream2.

egressMediaStream2RemoteIpSockAddr Remote signaling IP address for the egress MediaStream2.

egressMediaStream2Security Security Parameters for the egress MediaStream2.

Note

The following statistics are deprecated:

ingressMediaStream1LocalIpSockAddr
ingressMediaStream1RemoteIpSockAddr

Call Media Status Statistics

Caption

0	Table
1	Call Media Status Statistics
3	Call Media Status Statistics

Statistic	Description
`egressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of egress MediaStream1 for this call
`egressMediaStream1OctetsReceived`	The number of octets received in egress MediaStream1 for this call
`egressMediaStream1OctetsSent`	The number of octets sent in egress MediaStream1 for this call
`egressMediaStream1PacketLatency`	The packet latency in the egress MediaStream1 for this call
`egressMediaStream1PacketsDiscarded`	The number of packets discarded in egress MediaStream1 for this call
`egressMediaStream1PacketsLost`	The number of packets lost in egress MediaStream1 for this call
`egressMediaStream1PacketsReceived`	The number of packets received in egress MediaStream1 for this call
`egressMediaStream1PacketsSent`	The number of packets sent in egress MediaStream1 for this call
`egressMediaStream1RtcpPacketsReceived`	The number of RTCP packet received in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1RtcpPacketsSent`	The number of RTCP packet sent in egress MediaStream1 for this call (if RTCP is enabled for this call leg)
`egressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on egress leg
`egressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on egress leg
`egressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on egress leg
`egressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on egress leg
`egressRemPacketsLost`	The number of remote packets lost for this call leg
`egressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on egress leg
`egressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on egress
`ingressMediaStream1InterarrivalJitter`	The variation of packet inter-arrival time of ingress MediaStream1 for this call
`ingressMediaStream1OctetsReceived`	The number of octets received in ingress MediaStream1 for this call
`ingressMediaStream1OctetsSent`	The number of octets sent in ingress MediaStream1 for this call
`ingressMediaStream1PacketLatency`	The packet latency in the ingress MediaStream1 for this call
`ingressMediaStream1PacketsDiscarded`	The number of packets discarded in ingress MediaStream1 for this call
`ingressMediaStream1PacketsLost`	The number of packets lost in ingress MediaStream1 for this call
`ingressMediaStream1PacketsReceived`	The number of packets received in ingress MediaStream1 for this call
`ingressMediaStream1PacketsSent`	The number of packets sent in ingress MediaStream1 for this call
`ingressMediaStream1RtcpPacketsSent`	The number of RTCP packets sent in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1RtcpPacketsReceived`	The number of RTCP packets received in ingress MediaStream1 for this call (if RTCP is enabled for this call leg). Includes RTCP port, if enabled, for this call leg.
`ingressMediaStream1SrtpAuthFailure`	The number of RTP authentication failures on ingress leg
`ingressMediaStream1SrtpReplayFailure`	The number of RTP anti-replay failures on ingress leg
`ingressMediaStream1StunDtlsPacketsReceived`	The number of STUN/DTLS packets received on ingress leg
`ingressMediaStream1StunDtlsPacketsDiscarded`	The number of STUN/DTLS packets discarded on ingress leg
`ingressRemPacketsLost`	The number of remote packets lost for this call leg
`ingressRFactorInbound`	The inbound R-Factor threshold utilization value (as a percentage) on ingress leg
`ingressRFactorOutbound`	The outbound R-Factor threshold utilization value (as a percentage) on ingress leg
`mediaStream1Codec`	The codec for this media stream
`mediaStream1Label`l	The label applied to this media stream

...

Noprint
Back to Top

Command Examples

Code Block

language	none

> show table global sipRecStatussiprecStatus                
       RECORDER           RX RTP            TX RTP            RECORDING  
GCID   ADDRESS            ADDRESS           ADDRESS           LEG
1      10.11.12.13:5060   10.11.12.13:8000  10.11.12.13:8002  ingress

To view call detail status:

Code Block

language	none

> show status global callDetailStatus
callDetailStatus 786432 {
    mediaStreams                        audio;
    state                               Stable;
    callingNumber                       67890000;
    calledNumber                        2345;
    addressTransPerformed               none;
    origCalledNum                       "";
    scenarioType                        SIP_TO_SIP;
    callDuration                        9;
    mediaType                           passthru;
    associatedGcid1                     786432;
    associatedGcid2                     786432;
    associatedGcidLegId1                1;
    associatedGcidLegId2                0;
    ingressMediaStream1LocalIpSockAddr  "10.54.25.26/ 1024 (rtcp: 1025)";
    ingressMediaStream1RemoteIpSockAddr "10.34.13.243/ 6000 (rtcp: 6001)";
    egressMediaStream1LocalIpSockAddr   "10.54.27.26/ 1024 (rtcp: 1025)";
    egressMediaStream1RemoteIpSockAddr  "10.34.13.252/ 6000 (rtcp: 6001)";
    ingressMediaStream1Security         "rtp-disabled rtcp-disabled";
    egressMediaStream1Security          "rtp-disabled rtcp-disabled";
    ingressMediaStream1Bandwidth        127;
    egressMediaStream1Bandwidth         127;

To view call media status:

Code Block

language	none

> show status global callMediaStatus 
callMediaStatus 786432 {
    mediaStreamsInCall                          audio;
    ingressMacHeader                            64-0-F1-FD-B3-7F;
    egressMacHeader                             64-0-F1-FD-B3-7F;
    ingressBearerType                           voice;
    egressBearerType                            voice;
    ingressCfgAudioType                         G711;
    egressCfgAudioType                          G711;
    ingressActAudioType                         na;
    egressActAudioType                          na;
    ingressRemPacketsLost                       0;
    ingressRFactorInbound                       93;
    ingressRFactorOutbound                      93;
    egressRemPacketsLost                        0;
    egressRFactorInbound                        93;
    egressRFactorOutbound                       93;
    mediaStream1Label                           audio;
    mediaStream1Codec                           G711;
    ingressMediaStream1PacketsSent              518;
    ingressMediaStream1PacketsReceived          518;
    ingressMediaStream1OctetsSent               82880;
    ingressMediaStream1OctetsReceived           83048;
    ingressMediaStream1RtcpPacketsSent          2;
    ingressMediaStream1RtcpPacketsReceived      2;
    ingressMediaStream1PacketsLost              0;
    ingressMediaStream1PacketsDiscarded         0;
    ingressMediaStream1PacketLatency            0;
    ingressMediaStream1InterarrivalJitter       0;
    ingressMediaStream1StunDtlsPacketsReceived  0;
    ingressMediaStream1StunDtlsPacketsDiscarded 0;
    ingressMediaStream1SrtpAuthFailure          0;
    ingressMediaStream1SrtpReplayFailure        0;
    egressMediaStream1PacketsSent               518;
    egressMediaStream1PacketsReceived           518;
    egressMediaStream1OctetsSent                82880;
    egressMediaStream1OctetsReceived            83056;
    egressMediaStream1RtcpPacketsSent           2;
    egressMediaStream1RtcpPacketsReceived       2;
    egressMediaStream1PacketsLost               0;
    egressMediaStream1PacketsDiscarded          0;
    egressMediaStream1PacketLatency             0;
    egressMediaStream1InterarrivalJitter        0;
    egressMediaStream1StunDtlsPacketsReceived   0;
    egressMediaStream1StunDtlsPacketsDiscarded  0;
    egressMediaStream1SrtpAuthFailure           0;
    egressMediaStream1SrtpReplayFailure         0;
}

Noprint
Back to Top

To view call count interval statistics:

Code Block

language	none

> show table global callCountIntervalStatistics
               INTERVAL        CALL
NUMBER  NAME   VALID     TIME  COUNT
--------------------------------------
2       entry  true      1548  0
3       entry  true      2448  0
4       entry  true      3348  0
5       entry  true      4248  0

To view the status of IP trunk groups in this zone:

Code Block

language	none

 > show table global globalTrunkGroupStatus
                                                TOTAL                                              TOTAL
                                     TOTAL      CALLS     INBOUND  OUTBOUND  TOTAL       PRIORITY  OUTBOUND  BW                  BW       BW
                                     CALLS      INBOUND   CALLS    CALLS     CALLS       CALL      CALLS     CURRENT  BW         INBOUND  OU
NAME                      STATE      AVAILABLE  RESERVED  USAGE    USAGE     CONFIGURED  USAGE     RESERVED  LIMIT    AVAILABLE  USAGE    US
--------------------------------------------------------------------------------------------------------------------------------------------
GWGW                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC1                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC2                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC3                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC4                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC5                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0
SBC6                      inService  -1         0         0        0         -1          0         0         -1       -1         0        0

Noprint
Back to Top

Pagebreak

...

Space shortcuts

Page tree

Versions Compared

Old Version 7

New Version 8

Key

CAC Statistics

Call Detail Status Statistics

Call Media Status Statistics

Command Examples