...
This section provides information on the SBC 5400 the
package content and required tools to rack mount the SBC platform.
Required Tools
Before you install the SBC 5400 the
chassis into a rack, make sure that you have the following tools and equipment:
- #2 Phillips screwdriver (to install brackets and the chassis)
- 7/16" (11 mm) wrench (to attach earth ground lug)
- Label maker (to label cables, if needed)
- Voltmeter (for installing units with DC power supplies)
- A marker or masking tape to mark mounting holes
...
Package ContentBefore you install a new SBC 5400 new
chassis, unpack and inspect your equipment and hardware to verify you have all the necessary items to install
your SBC 5400 your chassis.
Accessory Kit
The following table provides the list of Bill of Materials (BOMs) provided with the SBC 5400 the
Accessory Kit.
| Caption |
|---|
|
Item Number | Item Description | Qty |
|---|
300-30016 | LUG 2 HOLE ,#6 AWG WIRE, 45° ANGLE TONGUE, 1/4" STUD HOLE, 5/8" HOLE SPACING | 1 | 301-31150 | 15PIN FEMALE D-SUB SOLDER STYLE | 1 | 301-31151 | METAL HOOD FOR 2 ROW 15 PIN D-SUB | 1 | 401-00119 | CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS | 1 | | CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS | | | CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS | | | CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS | | 510-00038 | ESD WRIST STRAP
 | 1 | ESD WRIST STRAP | | | ESD WRIST STRAP | | 510-00056 | WASHER, 1/4 SPLIT LOCK STLS STL-ROHS | 2 | 510-00057 | WASHER, FLAT- 1/4 REG STLS STL-ROHS | 2 | 511-00046 | NUT, HEX 1/4-20 STL STEEL-ROHS | 2 | 933-00450 | ASSEMBLY NOTES SBC5X00 ACCESSORY KIT | NA |
|
| Note |
|---|
Carefully remove the contents from the shipping container, and check each item for damage. The SBC 5400 The is shipped with the items listed below. If any item is missing or damaged, contact your Sonus representative for support. |
...