Versions Compared

Old Version 6

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 7

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Caption
0Table
1request global Parameters

 

...

Parameter

Description

global

Global objects applicable node-wide.

callCountReset

This object resets all statistics counts to zero.

callTrace

Call Trace Group configuration for the Node. Use this parameter to restart call trace when it is halted due to MaxTrigger or some other reason. Full syntax is:

> request global callTrace action command start

...

Info
titleNote

This command is only exposed after a callTrace configuration is performed. If no entries are present in the callTrace, this command is not available from CLI.

dnsClearCache
Clear the full DNS cache.
mediaCapture

Reset call count for media capture with following arguments:

  • disabledByGcid
  • gcid <gcid#> (range: 0-2147483647)
sipRec

Use this object to start/stop recording for the specified call.

  • startRecord
    • gcid – GCID of call to start recording.
    • callLeg –Call leg associated with this recording session.
      • egress
      • ingress
    • gcid <0-2147483647> – GCID of call to start recording.
    • srsIpAddress – IP address of the Recording Server.
    • srsPort – UDP Port of the Recording Server.
    • transport – Select the transport protocol over which to send the SIPREC INVITE.
      • tcp
      • udp (default)
    • trunkGroup  – Name of the SIPREC trunk group associated with this recording session.
  • stopRecord
    • gcid – GCID of call to stop recording.

...

Info
titleNote

The SIPREC feature is controlled by a system-wide SBC license (SBC-SIPREC). If the license is not available, any SIPREC recording returned by a PSX is ignored.

...

Info
titleNote

To support SIPREC INVITE over TCP, the sipSigPort configured in this zone must have transportProtocolsAllowed set to "sip-tcp". (Refer to Zone - SIP Sig Port - CLI).

Include Page
Recordertype_recordingtype
Recordertype_recordingtype

terminateCall

Terminates call based on the specified Global Call Identifier (GCID). 

  • GCID <gcid #>

...

Pagebreak