Page History

New CLI in 5.1.0R0

SBX-126: RADIUS authentication improvements

The SBC is enhanced in this release to configure up to three RADIUS servers per SBC with the addition of radiusServer and retryCriteria parameters to radiusAuthentication configuration object.

% set oam radiusAuthentication 
    radiusServer <server name>
        mgmtInterfaceGroup <string>
        priority <#>
        radiusNasIp <default=0.0.0.0>
        radiusServerIp <x.x.x.x>
        radiusServerPort <#>
        radiusSharedSecret <8-128>
        state <[disabled] | enabled>
    retryCriteria
        oosDuration <# minutes>
        retryCount <1-[3]>
        retryTimer <500-3000 milliseconds, default=1000> 

SBX-638: SRTP Pass-through Enhancement

The flag allowPassthru is added to secureRtpRtcp of Packet Service Profile.

% set profiles media packetServiceProfile <packetServiceProfile_name> secureRtpRtcp flags allowPassthru <[disable] | enable> 

SBX-4552 DNS SRV pathCheck Enhancement

 The default value of hostPort configuration under ipPeer pathCheck is updated to 5060.

% set addressContext <addressContext name> zone <zone name> ipPeer <IP peer name> pathCheck hostPort <0-65535, default=5060>

SBX-23345 Transcoder Free Transparency Support for JITC

The following new flags are introduced in Packet Service Profile to configure this feature:

• audioTransparency
  • unknownCodecBitRate

  • unknownCodecPacketSize

• reserveBwForPreferredAudioCommonCodec

% set profiles media packetServiceProfile <packetServiceProfile_name> audioTransparency
	unknownCodecBitRate <1-1000 KB/s, default=124>
	unknownCodecPacketSize <5-100 ms, default=10> 
   
% set profiles media packetServiceProfile <packetServiceProfile_name> flags reserveBwForPreferredAudioCommonCodec <[disable] | enable>

SBX-25296: SBC5K SIP Response Enhancement When IPTG is OOS

The flag processSGConfigWhenTGOOS is added to SIP Trunk Group object to support this feature. 

% set addressContext default zone <zonename> sipTrunkGroup <Trunkgroup name> processSGConfigWhenTGOOS <[disabled] | enabled> 

SBX-26140: Video Bandwidth SDP Handling Improvements and Enhanced Statistics

The following CLI changes made to implement this feature:

The description of Packet Service Profile's maxVideoBandwith and videoBandwidthReductionFactor are modified to:

• maxVideoBandwith: Specifies the maximum session bandwidth that can be used for a call with video streams. It Includes the bandwidth for all streams in the call (audio, video, BFCP, and so on). If "0" is the value, video calls are not allowed and only audio calls can be set up which follows the normal allocation process. The value ranges from 0 to 50000 kbps and the default value is 10 kbps.
• videoBandwidthReductionFactor: Specifies the amount to reduce the session bandwidth allocation for the calls that include video streams. This does not affect the signaling, but affects only the internal allocation of bandwidth used for the calls. The value of this flag is on percentage reduction factor. For example: If the value of this flag is 20, the allocation of bandwidth for the calls is reduced by 20%. So, if the normal bandwidth allocation for calls is 1000 kbps, it gets reduced to 800 kbps.

Two new statistics, ingressSessionBandwidthkbps and egressSessionBandwidthkbps, are added to callDetailStatus object to display the allocated session bandwidth on each leg.

> show status global callDetailStatus
callDetailStatus 524288 {
    mediaStreams                        audio,video;
    state                               Stable;
    callingNumber                       6033317777;
    calledNumber                        9811587876;
    addressTransPerformed               none;
    origCalledNum                       "";
    scenarioType                        SIP_TO_SIP;
    callDuration                        7;
    mediaType                           passthru;
    associatedGcid1                     524288;
    associatedGcid2                     524288;
    associatedGcidLegId1                1;
    associatedGcidLegId2                0;
    ingressSessionBandwidthkbps         525;
    egressSessionBandwidthkbps          525;
    ...

SBX-28540: TCP Connection Cleanup When Registration Becomes Inactive

The SIP trunk group flag clearTcpConnectionsforRegistration is added to allow the SBC to clear the TCP connection between UE and SBC once the registration becomes inactive.

% set addressContext <addressContext name> zone <zone Name> sipTrunkGroup <TG name> signaling clearTcpConnectionsforRegistration <[disabled] | enabled>

SBX-28807: Check for Charge Number Length on GR394/GR317 ISUP Trunks

The flag gr317ChargeNumberCompliance is added to the ISUP Signaling Profile configuration to check the charge number digit length is in compliance with GR317 which specifies a maximum of 10 digits in IAM message.

% set profiles signaling isupSignalingProfile <profile name> gr317ChargeNumberCompliance <supported | [unsupported]>

SBX-29116: Supported/Require/Allow Transparency Profile

The SIP Param Filter Profile is added in this release to allow the operator to create a profile defining a set of SIP header tags and methods to transparently pass or block, and then assign that profile to a trunk group. The SIP headers configured in this profile for pass-through are transparently passed to the Egress trunk group if received in the Ingress SIP message.

% set profiles services sipParamFilterProfile <profile name>
    action 
        block <all, or comma-separated list of tags/methods to include>
        passthru <all, or comma-separated list of tags/methods to include>
        rejectRequest <[disabled] | enabled>  (flag is applicable to sipHeader 'require' only)
    sipHeader <[allow] | require | supported>
    state <[disabled] | enabled>

SBX-30506: Pseudo Full ICE and MS-Lync ICE Support

The parameter iceKeepaliveTimer is added to NAT Traversal of SIP Trunk Group to extend the existing implementation of full-ICE. This enhancement allows the SBC to inter-operate with other ICE peers which require the connecting peer to act as a full-ICE agent.

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> services natTraversal iceSupport iceFull iceKeepaliveTimer <0 to 60 secs, default=15>

SBX-31656: WRTC Signaling and Datachannel Pass-through With ICE Termination 

The following flags and attribute are added are added to enhance DTLS-SRTP support and allow a relay mechanism that transparently passes the DTLS, SRTP and SRTCP packets end-to-end without DTLS certification or SRTP cryptographic encryption and decryption taking place at SBC.

New DTLS flags:

• dtlsSrtpRelay
• dtlsSctpRelay

New QOS Values attribute:

• dtlsSctpDscp

% set profiles media packetServiceProfile <profile_name> dtls dtlsFlags dtlsSrtpRelay <[disable] | enable>
% set profiles media packetServiceProfile <profile_name> dtls dtlsFlags dtlsSctpRelay <[disable] | enable>
% set profiles media packetServiceProfile <profile_name> qosValues dtlsSctpDscp <[0]-255>

SBX-31658: Support eDNS extended DNS RFC2671 - RFC6891

The flag, ednsSupport, is added to dnsGroup object to support Extension mechanisms for Domain Name Systems (EDNS) for statically configured and dynamically learned DNS servers.

% set addressContext <addressContext_Name> dnsGroup <dnsGroup_Name> ednsSupport <[disabled] | enabled>

Additionally, two statistics, ednsStatus and ednsFailures, are added to dnsServerStatistics object to display the current status of DNS server and the number of EDNS failed queries.

> show table addressContext addr_1 dnsGroup DNSGrp1 dnsServerStatistics
                                                                      TCP         TCP
                                                          TOTAL TCP   CONNECTION  CONNECTION  TCP                 TCP       EDNS       EDNS
INDEX  IP ADDRESS   QUERIES  TIMEOUTS  ERRORS  REFERRALS  CONNECTION  FAILED      SUCCESS     CONNECTIONTORNDOWN  FALLBACK  STATUS     FAILURES
-------------------------------------------------------------------------------------------------------------------------------------------------
1      10.11.12.13  2        0         0       0          0           0           0           0                   0         supported  0 

SBX-31974: SMM Enhancements Phase-5

Several SMM enhancements are included in this release.

• The SIP Adaptor Profile SMM rules are editable  without without changing the administrative state in a live environment.
• Two new criterion values,   variables-equal  and and variables-not-equal, are added to determine if the two variables exist and if they are equal
• Five new CDR fields (SMM-Field-1 through SMM-Field-5) are added to log the proprietary information to the accounting records using the SMM rules:
• The SBC is enhanced to generate and send PRACK messages internally, and send the PRACK back to the IAD if an incoming 18x with 100Rel is dropped.
• The SBC is enhanced to create SMM rules to directly manipulate SDP in a more refined way.
• The ADD operation is enhanced for the user to: 
  • add a line to the session block
  • add a line to the specific media stream
  • add a parameter to the specific SDP line in either session block or media stream
  • add a codec (codec name) to a specific instance of a particular media stream or all instances of that particular media stream
  • add a new stream to the SDP
• The DELETE operation is enhanced for the user to:

• • delete a line in the session block
  • delete a line in a specific media stream
  • delete a parameter from a specific SDP line
  • delete a codec (codec name) in

• • a specific instance of a particular media stream or all instances of that particular media stream
  • delete a codec by the position as it appears in the "m=" line in

• • a specific instance of a particular media stream or all instances of that particular media stream
• The GET operation is enhanced for the user to store the:
  • payload type for a given codec (full codec name) in

• • a specific instance of a particular media stream
  • codec position as it appears in the "m=" line for given codec (partial codec will be supported) in

• • a specific instance of a particular media stream
• The STORE operation is enhanced for the user to store:
  • a line in the session
  • a line in a specific media stream
  • a parameter in a specific SDP line
• The FILTER-

• CODEC operation is enhanced to filter or re-arrange the codec in a particular media stream. The from operand value represents the codec pattern being applied for the filtering.

• The CONDITION EXIST criterion is enhanced to:
  • use a new criterion type, sdpContent, to determine whether specific media stream contains any codec specific criterion
  • use a new messageBody type, messageBody: SDP, to detemine whether the SDP content exist in the message body

SBX-32133: Quick Re-registration on Alternate SIP Server When Primary Server is Down

The following IPSP parameters are added in support of quick re-registration on an alternate SIP server when the primary server is down :

The registrarRecovery parameter is added to

IPSP commonIpAttributes object, and includes following flags:

• • deRegisterAlternateOnPrimaryRecovery
  • overrideInternalExpiresTimer
  • registerToAlternateOnPrimaryDown
  • revertToPrimaryOnRecovery

The SIP Trunk Group

 queryPsxOnNextRefreshRegister request command is added with the following options:

• • newRegistrarIndex
  • overRideInternalExpires
  • registrarFqdn
  • registrarIpAddress

% set profiles signaling ipSignalingProfile <IpSignalingProfile Name> commonIpAttributes registrarRecovery
Possible completions:
  registerToAlternateOnPrimaryDown - Register to Alternate on Primary Down.
  overrideInternalExpiresTimer - Override Internal Expires Timers.
  revertToPrimaryOnRecovery    - Revert to Primary Registrar on Recovery.
  deRegisterAlternateOnPrimaryRecovery - Deregister Alternate On Primary Registrar Recovery.

% request addressContext <addressContextName> zone <zoneName> sipTrunkGroup <sipTrunkGroupName> cmds queryPsxOnNextRefreshRegister
Possible completions:
  newRegistrarIndex       - Route index to attempt after force PSX query.
  overRideInternalExpires - Over-ride SBX intenal expires timer.
  registrarFqdn           - Command applies only for registrations towards this REGISTRAR: FQDN.
  registrarIpAddress      - Command applies only for registrations towards this REGISTRAR: IP Address.

SBX-32846: IMS LI Phase 2 - MSRP, BFCP, RTCP, and VIDEO Interception

The SBC is enhanced to support various flavors of LI and a generic Call Data Channel (CDC) model to support any new flavors of LI. 

The following parameters are added under CDC object:

• interceptStandard
• vendorId
• mediationServer
• media
• tcp
• udp
• signaling
• dscpValue
• ipAddress
• portNumber
• state
• mode
• protocolType
• rtcpInterception

% set addressContext <addressContext name> intercept callDataChannel (CDC name)
    interceptStandard < etsi | [packetcable] | threeGpp>
    vendorId <[none] | ss8 | utimaco | verint>
    mediationServer <mediationServer name, 1-8 characters>
        media <tcp | udp>
        signaling
            dscpValue <0-63, default=16>
            ipAddress <IPv4/IPv6 address>
            mode <inService | [outOfService]>
            portNumber <[0]-65535>
            protocolType <[tcp] | udp>
            state <[disabled] | enabled>
    rtcpInterception <[disabled] | enabled>

SBX-33422: Metric for Simultaneous Active and Stable Sessions for an Interval of Time

The SBC is enhanced to allow a percentage of sessions beyond the purchased session license capacity to measure the maximum amount of simultaneously active and stable sessions over a configurable time interval.

Two statistics, callCountCurrentStatistics and callCountIntervalStatistics are added to the Global object.

> show table global callCountCurrentStatistics
       CALL
NAME   COUNT
--------------
entry  0
 
 
> show table global callCountIntervalStatistics
               INTERVAL        CALL
NUMBER  NAME   VALID     TIME  COUNT
--------------------------------------
2       entry  true      1548  0
3       entry  true      2448  0
4       entry  true      3348  0
5       entry  true      4248  0

A new configuration flag, callCountTimeInterval, is added to intervalStatistics object.

% set system intervalStatistics callCountTimeInterval <5-60 minutes, default=15>

SBX-34194: MS Lync/Skype Remote Desktop Sharing Support on SBC

The following parameters are added to the sipTrunkGroup to allow the SBC to support MS Lync/Skype remote desktop sharing. 

• lyncShare
• iceTcpRole

% set addressContext <addressCnotext_name> zone <zone_name> sipTrunkGroup <sipTrunkGroup_name> media lyncShare <disabled | [enabled]>
 
% set addressContext <addressCnotext_name> zone <zone_name> sipTrunkGroup <sipTrunkGroup_name> services natTraversal iceSupport iceLync iceTcpRole <active| [passive]>

SBX-34837: Alarm Mgr Synchronization Support of EMS REST

The 'request alarms' command is enhanced with the following options.

• comment alarm – Add comments/notes to a specific alarm using alarm Id.
• state alarm – Set operator state of a specific alarm using alarm Id

> request alarms current
        comment alarm
               id <integer>
               text <operator comment>
        state alarm
               acknowledgeState <acknowledge | unAcknowledge>
               id <integer>

SBX-35114: Extend Registration Search Based on Partial Address of Record

The following statistics are added to addressContext sipActiveRegisterNameStatus table to allow the SBC to search the registration name status based on part of the Address of Record (AOR), plus provides the ability to search the entries which are not in the statistics table but registered in the SBC application using a part of the AOR name or the entire AOR name. :

• externalExpirationTimeLeft

• internalExpirationTimeLeft

• regId
  

• transportProtocolToAS

• transportProtocolToEndpoint

In this example, userPart is used as first parameter to retrieve the entry status that is not in the table but registered in the SBC application.

> show status addressContext default sipActiveRegisterNameStatus 67891 0
state                       completed;
contactURI                  sip:67891@10.54.80.101:7070;
nextHopIpAddress            10.54.80.101;
nextHopPortNum              7070;
registrarIpAddress          10.54.19.168;
registrarPortNum            7080;
externalExpirationTime      1800;
internalExpirationTime      3600;
creationTime                2016-01-28T06:39:34+00:00;
registrarDomainName         "";
endPointBehindNapt          0;
natPinholeLearningStatus    none;
securityMechanismType       none;
registrationType            normal;
e2aeMediaSecurity           none;
isRoaming                   0;
transportProtocolToEndpoint udp;
transportProtocolToAS       udp;
externalExpirationTimeLeft  1602;
internalExpirationTimeLeft  3052;
regId                       9996; 

SBX-35400: SMM Full Dialog Stateful Variable Support

The SBC is enhanced to support Dialog Stateful variables for Out-of-Dialog SUBSCRIBE messages when advancedSMM is enabled, in addition to INVITE and REGISTER.

% set profiles signaling sipAdaptorProfile SMM_Test advancedSMM <[disabled] | enabled>

SBX-35473: Media Type Based CAC Support 

The SBC is enhanced to provide bandwidth Call Admission Control (CAC) per supported media type by limiting video streams to specified bandwidth limits in order to provide a level of protection from video calls consuming call bandwidth otherwise needed for audio calls. This protection is implemented on SBC Core by setting video thresholds (bandwidthVideoThreshold) to specific limits at the zone, trunk group, endpoint and shared CAC levels. The thresholds are a percentage of the total bandwidth limit such that any traffic above this level is reserved for audio-only calls. This video threshold limit behaves the same for emergency as well as non-emergency calls. Any video calls above the video threshold limit are dropped to allow audio calls to use this bandwidth.

NOTE:  Bandwidth CAC is not available for MSRP, data channels, FECC and BFCP streams.

set addressContext <addressContext name> zone <zone name> cac bandwidthVideoThreshold <0-100>
 
set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sip tg name> cac bandwidthVideoThreshold <0-100> 

set global cac sharedCacLimitsPool <pool name> bandwidthVideoThreshold <0-100> 
 
set profiles sipCacProfile <profile name> bandwidthVideoThreshold <0-100> 

The following status and statistics commands are added in support of this feature:

show status addressContext default zone ZONE_AS callFailureCurrentStatistics videoThresholdLimit
show status addressContext default zone ZONE_AS callFailureIntervalStatistics videoThresholdLimit

show status global cac sharedCacFailureCurStats videoThresholdLimit
show status global cac sharedCacFailureIntervalStats videoThresholdLimit

show status addressContext zoneCurrentStatistics videoThresholdLimit 
show status addressContext zoneIntervalStatistics videoThresholdLimit
 
show status addressContext default zone ZONE_IAD sipPeerCacStatus videoThresholdLimit

SBX-35522: Use Same ICID in the Generated P-Charging-Vector

The storeICID flag is added to SIP Trunk Group signaling object to allow the SBC to retain the same ICID value generated during the first egressed INVITE in the P-Charging-Vector header in an egressed INVITE. This flag is configured on the egress trunk group.

% set addressContext <addressContext_Name> zone <zone_Name> sipTrunkGroup <sipTrunkGroup_Name> signaling storeICID <[disabled] | enabled>

SBX-36026: Upgrade Manager Enhancements

A new system status command, softwareUpgradeDetailedStatus, is added to view the detailed upgrade log of the LSWU upgrade process including the number of steps involved, the time taken to complete the upgrade and the results of the upgrade process.

> show table system softwareUpgradeDetailedStatus <SYSTEM_NAME> detailedStatus

SBX-38342: RTCP Support For Held Calls Using RR-RS Bandwidth Modifier

The following attributes are added to rtcpOptions of packetServiceProfile object:

• enableRTCPForHeldCalls
• rrBandwidth
• rsBandwidth

% set profiles media packetServiceProfile <profile name> rtcpOptions rtcp enable enableRTCPForHeldCalls <[disable] | enable>
 
% set profiles media packetServiceProfile <profile name> rtcpOptions rtcp enable enableRTCPForHeldCalls enable rrBandwidth <100-4000, default=250>
 
% set profiles media packetServiceProfile <profile name> rtcpOptions rtcp enable enableRTCPForHeldCalls enable rsBandwidth <100-3000, default=250>

The flag, initialCodecMode, is added to the codec of codecEntry object. This flag is applicable for AMR and AMR-WB codecs.

% set profiles media codecEntry <codecEntry object> codec <AMR, AMRWB codec> initialCodecMode <[disable] | enable>

The flag, sendRTCPBandwidthInfo, is added to Common Flags of IP Signaling Profile object.

% set profiles signaling ipSignalingProfile <profile name> commonIpAttributes flags sendRTCPBandwidthInfo <[disable] | enable> 

SBX-38760: Enable SBC REST M2M Access by Default for all Administrator and Calea Users

The default value of localAuth user m2mAccess flag is changed to "enabled" for Administrator and Calea users (only) to enable SBC REST M2M access by default for these.

% set oam localAuth user <user name> m2mAccess <disabled | [enabled]>

SBX-41133: LSWU enhancment for advertiseAudioOnly flag

The advertiseAudioOnly is added to SIP trunk group object to allow the SBC to send only the main audio/image stream in the SDP offer for the following LSWU scenarios:

> set addressContext default  <zone_name> sipTrunkGroup <SIP_trunk_group_name> media advertiseAudioOnly <disabled | enabled>

SBX-41511: Media Policer Reservation For Worst Case Codec

By default, the SBC reserves the worst case common audio codec bandwidth on trunk groups and IP interfaces for pass-through calls, and polices for the same bandwidth. To facilitate asymmetric pass-through calls scenarios/cases and to police on the heaviest codec in the offer or answer, the PSP flag policeOnHeaviestAudioCodec is added in this release.

% set profiles media packetServiceProfile <packet ServiceProfile name> flags policeOnHeaviestAudioCodec <[disable] | enable> 

> request system admin <system name> setHaConfig
    bondMonitoring <currentValue | direct-connect | network-connect>
    leaderElection <currentValue | enhanced | standard> 

% set system admin <System_Name> accountManagement bruteForceAttackOS
    allowOSAutoUnlock <[disabled] | enabled>
    consecutiveFailedOSAttemptAllowed <1-10, default=3>
    OSstate <[disabled] | enabled>
    unlockOSTime <[30]-5400 seconds> 

% set profiles signaling ipSignalingProfile <ipSignalingProfile_Name> egressIpAttributes sipCauseMapping sipToInternalCauseMappingProfileName <sipToInternalProfile_Name>

% set profiles signaling ipSignalingProfile <ipSignalingProfile_Name> egressIpAttributes sipCauseMapping internalToSipCauseMappingProfileName <internalToSIPProfile_Name>

% set profiles signaling sipCauseCodeMapping sipToCpcCauseMapProfile <sipToCpcCauseMapProfile_Name> baseProfile defaultSipCpc causeMap <causeMap_Value> cpcCause <cpcCause_Value>
% set profiles signaling sipCauseCodeMapping cpcToSipCauseMapProfile <cpcToSipCauseMapProfile_Name> baseProfile defaultCpcSip causeMap <causeMap_Value> sipCause <sipCause_Value>

Deprecated CLI

No CLI objects or statistics were deprecated in this release.

istorical Historical List of deprecated CLI: