Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 3

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Parameter

Description

Type

Select one of the following:

  • Primary
  • Secondary

IP Address V4 or V6

The IP Address of the external CDR server. The following IP address types are supported:

  • IPv4—This is V4 IP address in dotted decimal form (for example 128.127.50.224).
  • IPv6—This is V6 IP address in hexadecimal/colon form (for example, 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).
CDR PortSpecifies the SSH port number of the remote server. The value ranges from 1 to 65535 and the default value is 22.
Use Ssh Key File

Enable this parameter to use SSH public key for authenticating the remote CDR server.

 
  • disable (default)
  • enable

Username

Specifies the remote username.

Password

Specifies the remote server password.

Note

You can enter password in non-echo mode when prompted and not inline.

Path

Specifies the remote directory path where the files should be transferred.

File Prefix

Specifies the remote file prefix that is used to form the remote file.
This prefix will be appended with a date stamp and sequence number once transferred.

Connection Timeout

The time to wait before timing out the connect operation. The values ranges between 15 and 600.

Transfer Timeout

The time to wait before timing out the file transfer. The values ranges between 15 and 600.

Buffer SizeSpecifies the buffer size for the new admins created. The value ranges from 4 to 1024 and the default value is 1024.

...

Parameter

Description

Force Current Server

Use this request parameter to forcibly set the specified server as the current server.
Generate Ssh Public KeysUse this request parameter to generate the SSH public key to authenticate the remote CDR servers.
Reset Cdr Server StatsUse this request parameter to reset the CDR server statistics.

...

  1. Choose forceCurrentServer to set the specified server as current server.

  2. Click Select. A pop up window displays the selected command.

    Caption
    0Figure
    1Cdr Server - Admin Commands (forceCurrentServer)
     

  3. Click forceCurrentServer button to proceed or Click Delete to exit the window.

  4. The action concludes with the result.

    Caption
    0Figure
    1Cdr Server - Admin Commands Success
     

  5. Click OK to Complete.

Admin Command Execution (generateSshPublicKeys)

  1. Choose generateSshPublicKeys to generate SSH Publick Keys for remote servers.

  2. Click Select. A pop up window displays the selected command.

    Caption
    0Figure
    1Admin Commands (generateSshPublicKeys)

    Image Added

  3. Click generateSshPublicKeys button to proceed or click Delete to exit the window.

  4. The action concludes with the result.

    Caption
    0Figure
    1Admin Command Success

    Image Added

  5. Click Ok to complete.

Admin Command Execution (resetCdrServerStats)

...