| Field | Description |
|---|
| BASIC FIELDS: |
Gateway (Mandatory) | The gateway associated with the simulated call's policy request. Gateway choices include: - GSX: used to simulate a circuit switched call.
- SIP: used to simulate the second dip of a SIP (Session Initiation Protocol) call.
- H.323: used to simulate the second dip of an H.323 call.
The gateway you choose does not need to physically exist. However, it must be listed in the Gateway table on the PSX to which you are sending the simulated policy request. |
CalledNumber | The number being called. |
CallingNumber | The number from which the call originates. |
CarrierCode | The carrier code of the carrier from which the call is being routed. When ISUP signaling is used, the Carrier Code field is populated from the Carrier Information Parameter (CIP). |
SrcTrunkGroup (Mandatory) | The trunk group from which the call was received on the ingress trunk group. |
| ADVANCED FIELDS: |
AdditionalCategoriesCount | Indicates the The number of additional categories. |
AdditionalCategory | This field contains the The additional category of the incoming call. |
BillingNumber | This specifies the The billing number for the call. In ISUP terminology, this is referred to as the charge number. |
CalledUri | This field contains the The called URI for the call. |
CallingBusinessGroup | Includes information such as business group ID and line privileges for the calling business group. |
CallingBusinessLocation | This field contains the location of the The calling business location. |
CalledDirectoryNumber | This field contains the The called directory number for the call. |
CalledINNumber | This field contains the The called intelligent network number for the call. |
CallingUri | This field contains the The calling URI for the call. |
CallTrace | Use this field to enable or disable call tracing. If call tracing is enabled, you must provide the Global Call ID.
Call tracing is enabled by default. |
CarrierSelection | This specifies how the The carrier code was specified selection method for the call. The data for this field is derived from the carrier selection parameter in ISUP signaling. |
Category | Similar to OLIP (Originating Line Information Parameter). |
CauseOfNoId | This parameter specifies the The cause of no ID, which can be Invalid, Reserved, User Requested, Interactive with Other Service, or Coin Phone. |
ChosenCarrierInfo | This parameter specifies the The chosen carrier information for the call. |
ContractorNumber | This is a Japan-specific ISUP parameter . This parameter which includes the telephone number for billing. |
Correlation IDThis | parameter specifies the correlation IDThe correlation identifier. |
CountryCode | In the CAS (Channel Associated Signaling) protocol, the country code is transmitted as a separate field. When a country code is present and the signaling protocol is CAS, the country code is passed to the PSX in the Country Code field. |
DestTG | To simulate a SIP call received using global number format, specify the valid destination trunk groups that the PSX client would provide to the PSX in the policy request from the SIP DTG parameter. The PSX skips most call processing, fetches routes, and performs digit manipulation to convert SIP global numbers to numbers compatible with ISUP signaling, and then populates the route attributes in the policy response. |
Dialed Number | This parameter specifies the The (unchanged) number that was dialed. |
DPC Info | This The customer-specific parameter specifies Destination Point Code Informationdetails, including national ID, country ID, gateway ID, member status, and codes. |
DstTGAttributes | Indicates the The direction and bearer capability of the destination trunk group. |
ForwardCallIndicators | This specifies the The ISUP signaling forward call indicator data. The PSX client populates this information from the ISUP Forward Call Indicator parameter. |
GenericAddress | These fields map This field maps to SS7 IAM Generic Address parameters parameter to store information such as original redirecting number and redirecting number. |
GenericDigits | Used Generic digits used for Switch ID/Trunkgroup ID-based routing. |
GenericName | The PSX client should send the sends this generic name parameter in signaling message. |
GenericNumber | Used to specify Feature Group D delivery. |
HLC | Specifies the The Higher Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking. |
JTIParameters | Specifies customerCustomer-specific parameters. |
JurisdictionInfo | Specifies the The jurisdiction information parameter. Stores This parameter stores the NPA/ NXX assigned to the trunk or extracted from the calling party number. |
LIRoutingInfo | Used to specify Lawful Intercept routing parametersRouting details. |
LLC | Specifies the The Lower Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking. |
LocationNumber | Used to indicate the The geographic position of the calling party. The format is country-specific, but is likely to be some longitude/latitude numeric encoding. |
MessageType | The SIP message type for the call, which can be INVITE, NOTIFY, REGISTER, or SUBSCRIBE. |
MessageWaitingIndicatorState
Request | The MWI state for a subscriber with MWI services (either
MESSAGE_WAITING or NO_MESSAGE). |
MoreRoutesPolicyRequest | Check this box to request that the return of more than 10 routes be returned. |
NatureOfConnection | This is used to specify the following information for the call: - Continuity Check Indicator
- Echo Control Device Indicator
- Satellite Indicator
|
NetworkData | Used to specify the The Partition ID and Network ID that is expected in the ingress IAM. The PSX uses the received NetworkData to map in the database to the routing partition to which the carrier's customer belongs, used for routing international calls to and from the carrier's customer network. |
NFCI | This parameter, National Forward Call Indicator, contains zoning indicator, charge indicator, and IN call indicator fields. |
NonStandardParameter | Non Standard Parameter represents any user- or network-specific
ISUP parameter that is not in the standard protocol definition. |
OriginalRedirectingNumber | This is used to specify the The original called number. Signifies information sent in a forward direction when a call is redirected more than once and identifies the original called party. |
OriginatingCarrierInfo | This is a Japan-specific ISUP parameter. It includes the originating carrier code of the incoming call. |
Originating ChargeArea | This field is used to specify the The originating charge area for the call. |
OriginatingGatewayInfo | The SIP server or H.323 gateway from which the call originated. |
OriginatingLineInfo | This specifies the The originating line type. This field is populated by the PSX client from the Originating Line Information Parameter in ISUP signaling. |
OriginatingTrunkGroup | The ingress trunkgroup trunk group on the gateway that is the actual originator of the call or the name of the originating trunkgroup trunk group on the SIP server. |
PolicyIndicators | Specifies whether to download script data in the policy response. With GSX script caching, the PSX does not automatically send script data in policy responses. |
PortabilityInfo | Specifies whether or not number portability information is included in the request (NP Status), and whether the Query on Release (QoR) is in the ingress message or the local exchange must perform the lookup (NPI Flags). This is for INAP use only. |
PresentationNumber | This field includes the presentation number for the call. |
PriorityCallInfo | Indicates whether the subscriber is a priority caller. |
PublicPresenceDirectoryNumber | Indicates the number type and number for a public presence directory number, if present. |
RedirectForwardInformation | This field includes the redirect forward information for the call. |
RedirectingBusinessGroup | Specifies a redirecting business group for the call. |
RedirectingNumber | Use to specify the number used instead of the called number to redirect the call. Signifies the information sent in the forward direction indicating the number from which the call was last redirected. |
RedirectionInfo | Provides the reason for redirecting the call. |
RedirectionCapability | This field includes the redirection capability parameter for the call. |
RedirectionNumber | Used to specify information sent in the backward direction indicating the number towards which the call must be rerouted or which has been forwarded. |
ScpCarrierCode | The SCP carrier code; same as the carrier code in the basic request. |
ScfID | Specifies the Service Control Function identifier. |
SipApplicationReceiveAddress | For SIP call routing, specifies the IP address and port number of the SIP interface on which the call was received. |
SipFromDisplayName | For SIP call routing, specified the From header display name. |
SipFromHeader | For SIP call routing, specifies the contents of the From header. |
SipPaiSipDisplayName | For SIP call routing, specifies the SIP P-Asserted-Identity SIP
display name. |
SipPaiSipUri | For SIP call routing, specifies the SIP P-Asserted-Identity SIP URI. |
SipPaiTelDisplayName | For SIP call routing, specifies the SIP P-Asserted-Identity Tel display name. |
SIP P-ChargingVector | This field contains the SIP P-Charging-Vector parameter for the call. |
TimeStamp (Mandatory) | The time at which the simulated call was placed. |
TransitCarrierInfo | Specifies the The transit carrier information to use for the call. |
TransitNetworkSelection | This specifies the The transit network selection detail. |
TranslatedNumber | Number of translations on a per-route basis. |
UniversalCallData | Contains a universally unique call identifier (ID) comprised of the node ID (a number identifying the switch), a boot count (the number of reboots on the switch), and a Call ID. This parameter is encoded as a string containing a hexadecimal representation of the data and is used as the Session ID between the PSX and MAP Server. |
UserControlledOutgoingCall
RestrictionUserControlledOutgoingCallRestriction | Imposes different levels of outgoing call restrictions. Not used in this release. |
UserServiceInfo | Specifies the User Service Information parameter value received in signaling for ISDN/ISUP interworking. |
XCorellationID | A customer-specific parameter for a call involving the PSX SPAS
service. |
VisitorMA | Specifies the Visitor MA (Message Area) parameter value, which is a customer-specific Japan ISUP extension parameter for routing calls in a mobile network. |
ZZCode | This is used in CAS signaling. |
