Page History

...

1. Launch the host remote console through the BMC. Refer to Launching the Remote Console from the BMC.

2. Select Device in the JViewer and click Redirect ISO as shown in Figure 1the figure below.

   Caption
   0 Figure 1 Mounting ISO Image

3. From the Open dialog, browse to and select the ".iso" file and click Open. This mounts the ISO image from your local desktop or laptop.

   Caption
   0 Figure 1 Open Dialog Screen

4. Reboot the system from JViewer by executing the following command.

   Code Block
   language none
   # reboot

5. Press <DEL> or <F2> immediately, when the splash screen appears.
   
   

   Caption
   0 Figure 1 BIOS Configuration Screen

6. The BIOS configuration screen displays. Use left arrow key to navigate to the Save & Exit menu.

7. Select AMI Virtual CDROM 1.00 from Save & Exit menu to boot from the virtual CD drive. This instructs the server to boot from the redirected ConnexIP OS ISO image.

   Caption
   0 Figure 1 Booting from Virtual CD Drive

8. Select Install in the Sonus ConnexIP Installer Boot menu and press <Enter> to start the installation.

   Caption
   0 Figure 1 Sonus ConnexIP Installer Boot Menu

9. Select American English and press <Enter>.

   Caption
   0 Figure 1 Keymap Menu

   
   The automated installation process starts. This process takes approximately 30 to 40 minutes.

   Caption
   0 Figure 1 Partitions Formatting Screen

   Caption
   0 Figure 1 Installing the Base System

   Caption
   0 Figure 1 Selecting and Installing Software

   Caption
   0 Figure 1 Copying SBC Package

   Caption
   0 Figure 1 Running Post Install

   
   Once the installation completes, the disk partition upgrade is in progress. At this stage, DO NOT power off the system.

   Caption
   0 Figure 1 Disk Partitioning

   
   After system reboot, the ConnexIP login screen appears on the screen.

   Caption
   0 Figure 1 ConnexIP Login Screen

...