Add_workflow_for_techpubs | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This article explains setting up
Spacevars | ||
---|---|---|
|
...
...
...
Note |
---|
...
|
...
| ||||||
Maximum File Size: 1 MB Valid Audio File Type:
|
Follow instructions here: SBC SWe Lite - Uploading Music on Hold Files.
Table plus | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
To upload a music (sound) file :
Upload the file using the Uploading a Sound File procedure in Configuring the Media System.
To connect a live audio source through an FXS port:
Connecting an audio source for Music On Hold requires the use of an adapter between
Spacevars | ||
---|---|---|
|
Music On Hold volume is controlled from the audio source device (iPod, MP3 Player, etc.). The preferred volume level can be adjusted by listening to the stream, or by examining the RTP trace captured from the SIP call leg of the call. Use the receive gain settings on the FXS port to make any additional fine-tuning volume adjustments.
To use Music on Hold, you must specify a source in the Media System Configuration page tab of the UI and then Enable Music on Hold in the applicable SIP Signaling Group.
...
.
To verify that the file has been successfully uploaded:
The Music on Hold status will be Loaded if the file was successfully uploaded.
Panel | |||||||
---|---|---|---|---|---|---|---|
| |||||||
|
Other status' are:
Note | ||||
---|---|---|---|---|
| ||||
If your system does not have transcoding licenses, be sure your MOH MoH file is encoded in the same Law as that your calls use. For instance, if you 're are using A-Law for your calls, be sure to use an A-law encoded MOH MoH file. If your system has transcoding licenses, then the system will automatically transcode between different types of codec compressions. |
...