Page History

1. Access the Console one of two ways.

• • Selecting

...

• • the Console tab or

1. • From
from
2. • the Summary tab select the Open Console link (the

     Spacevars
     0 series3

     must be powered on for this
link
3. • to work).
Login as user netconfig and password config. This launches the interface mapping shell script. 
4. • 
     
     

   Caption
   0 Figure 1 Logon to Console 3 Logon to Console
   Image Added

    
   

5. Change the password for user netconfig. The password must be at least six characters in length and include uppercase and lowercase characters, a number, plus other combinations of characterscharacter.
   

   
   

   Caption
   0 Figure 1 Logon to ConsoleModify Password 3 Logon to ConsoleModify Password
   Image Modified

1. Caption
   0 Figure 1 Admin and Media Interface Names 3 Admin and Media Interface Names

   
   

   Info
   The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI. The MAC address identified previously in the virtual machine editing portion of this procedure is shown in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.

   
   

   Info
   If the network mapping and connection are correct, the Admin IP address will display on the console port. If the Admin IP address does not display, check the connections and network mapping.

    
   

2. Ensure the admin port is connected to a network with DHCP server enabled.

3. At the prompts, enter username netconfig and password config.
   

4. Enter the admin interface name. Example: mgt0.
   

5. Enter the Ethernet 1 Media interface name. Example: pkt0.

   Caption
   0 Figure 1 Admin IP Address Displays 3 Admin IP Address Displays

    

6. At the prompts, enter username root and password chorus.  

   Caption
   0 Figure 1 Root Login 3 Root Login

   
   

   Note
   icon false title Note
   After the WebUI initial setup, SSH must be enabled to access the console as user root.

7. Select the Console tab on the

   Spacevars
   0 series3

   GUI.
8. Press Enter to activate the console.
   

9. At the prompt, enter username netconfig and password config.   
     

   Caption
   0 Figure 1 Netconfig Login 3 Netconfig Login

    
   Caption

   0	Figure
   1	Modify Password
   3	Modify Password

   Image Removed