Page History
| Add_workflow_for_techpubs | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
| Note | ||
|---|---|---|
| ||
An ESXi VMware console is used as an example for this procedure, other consoles may look slightly different. |
- Access the Console one of two ways.
- Selecting the Console tab or
...
| Note | ||
|---|---|---|
| ||
Access the console by:
|
|
...
...
Log in as user
netconfigwith password asConfig!. Change the password for usernetconfig. The password when prompted.
a number, plus other combinations of characterNote icon false Passwords must be at least six characters in length and include uppercase and lowercase characters,
and numerals.
Caption 0 Figure 1 Modify Password 3 Modify Password Choose DHCP or enter a static IP address.
Code Block Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): ncaption
0Note
Figureicon false title Note Sonus recommends that you first connect the admin port to a network with DHCP server enabled, otherwise you will need to enter a static IP address when prompted for an IP address.
Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.
Info icon false 1 Admin and Media Interface Names 3 Admin and Media Interface Names Info The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.
The Use the MAC address identified previously in the virtual machine editing portion of this procedure is shown i n order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.
- Enter an admin interface name. Example:
mgt0. Enter an Ethernet 1 Media interface name. Example:
pkt0.Enter each subsequent Ethernet Media interface Name, and then apply the changes.
| Caption | ||||||
|---|---|---|---|---|---|---|
| ||||||
| Info | ||
|---|---|---|
| ||
| If the network mapping and connection are correct, the Admin IP address will display on the console port. If the Admin IP address does not display, check the connections and network mapping. |
...
Enter the Ethernet 1 Media interface name. Example: pkt0.
| Caption | ||||||
|---|---|---|---|---|---|---|
| ||||||
...
| Note | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
If DHCP is used,
|
...
| 0 | Figure |
|---|---|
| 1 | Root Login |
| 3 | Root Login |
...
| Note | ||||
|---|---|---|---|---|
|
...
After the WebUI initial setup, SSH must be enabled to access the console as user root.
| If this is the first time interface mapping is being done, the system will automatically reboot. Any future remapping of interfaces will not automatically trigger a reboot, but will inform the user that they need to do so in order for the changes to be placed into affect. |
| Info | ||
|---|---|---|
| ||
Proceed to SBC SWe Lite Initial Setup. |
| Pagebreak |
|---|
...
| Spacevars | ||
|---|---|---|
|
...
At the prompt, enter username netconfig and password config.
| Caption | ||||||
|---|---|---|---|---|---|---|
| ||||||
| Pagebreak |
|---|
...
...
Overview
Content Tools