Page History

...

The 

Spacevars
0 series

supports three system created logical interfaces (known as Ethernet 1 IP,  Ethernet 2 IP, and Ethernet 3 IP) used to hold the IP addresses of the Ethernet ports 1, 2, and 3 respectively (see Sonus SBC 1000 v2 Front Panel). In addition to the system created logical interfaces, the

Spacevars
0 series

also supports user created VLAN logical interfaces. VLAN logical interfaces are created each time a VLAN is added to the system. See About Logical Interfaces - VLAN Interfaces.

Info
The third Ethernet port on the SBC 1000 is available only if running selected SBC 1000 v2 hardware and SBC Release 6.0.0 or later. For hardware details, see Sonus SBC 1000 Hardware Specifications.

...

The 

Spacevars
0 series2

system defines a logical interface called the Admin IP (Administrative IP, also known as the Management IP). This logical interface is used to hold the IP address of the Admin Ethernet port (see Sonus SBC 2000 Front Panel) . A secondary IP address may be configured for this logical interface. The primary IP address is a factory-default IP address of 192.168.128.2/24 and it is used for running Initial Setup of the 

Spacevars
0 series2

system.

...

About Logical Interfaces - VLAN Interfaces

As described in the Managing VLANs - SBC Edge 1000-2000 section, each time a VLAN is created, a matching Logical Interface is also automatically created. This Logical Interface allows you to configure an IP address and have IP layer access for this VLAN. The configured IP address can be accessed through any Ethernet port that is associated with the given VLAN. VLAN Logical Interfaces behave the same as any other Logical Interface, and can be used for transporting VOIP media packets (e.g. RTP, SRTP), protocol packets (e.g. SIP, RTCP, TLS), and/or dynamic routing.

...