Page History

...

1. Use Remote Desktop to connect to the Lync Front End Server.
2. Launch the Topology Builder.
3. In the left pane select Mediation pools > relevant pool.
4. Right-click, then select Edit to open its properties.
5. Select the newly added Sonus SBC 1000/2000 gateway from the list.

6. Click Add...to associate it with the Mediation Server as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Associate With with Mediation Server

7. Use Remote Desktop to connect to the Lync Front End Server.
8. Launch the Topology Builder.
9. Right-click on Lync Server 2010 in left pane.

10. Select Publish Topology...as shown below.

    Panel
    borderStyle none
    Caption 0 Figure 1 Publish Topology

...

1. Open the LYNC Server 2010configuration page:
   1. Enter the URL of the Front-End pool (https://<fqdn of the front end pool>/cscp).
2. Click Voice Routing in the left pane.
3. Click Voice Policy in the right pane.

4. Double-click the relevant policy_ in the list.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Relevant Policy

    

    

5. Double click the relevant PSTN usage record.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Relevant PSTN Usage Record

    

    

6. Double Click on the Route entry.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Route Entry

7. Add the secondary Sonus SBC 1000/2000 gateway into Associated Gateways list

   Panel
   borderStyle none
   Caption 0 Figure 1 Add Secondary Sonus SBC 1000/2000 Gateway

    

    

8. Click OK, OK, and OK to exit out of the Voice Policy configuration.