Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

    • From the Summary tab select the Open Console link (the
      Spacevars
      0series3
      must be powered on for this to work).

    Caption
    0Figure
    1Logon to Console
    3Logon to Console

     

  1. Change the password for user netconfig. The password must be at least six characters in length and include uppercase and lowercase characters, a number, plus other combinations of character.

     

    Caption
    0Figure
    1Modify Password
    3Modify Password


  2.  

    Caption
    0Figure
    1Admin and Media Interface Names
    3Admin and Media Interface Names

    Info

    The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.

    The MAC address identified previously in the virtual machine editing portion of this procedure is shown in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.

    Info
    If the network mapping and connection are correct, the Admin IP address will display on the console port. If the Admin IP address does not display, check the connections and network mapping.
     
  3. Ensure the admin port is connected to a network with DHCP server enabled.
  4. At the prompts, enter username netconfig and password config. 
  5. Enter the admin interface name. Example: mgt0.
  6. Enter the Ethernet 1 Media interface name. Example: pkt0.
     

    Caption
    0Figure
    1Admin IP Address Displays
    3Admin IP Address Displays

      

  7. At the prompts, enter username root and password chorus.
      

    Caption
    0Figure
    1Root Login
    3Root Login

    Note
    iconfalse
    titleNote

    After the WebUI initial setup, SSH must be enabled to access the console as user root.

  8. Select the Console tab on the
    Spacevars
    0series3
    GUI.
  9. Press Enter to activate the console.
  10. At the prompt, enter username netconfig and password config.   
      

    Caption
    0Figure
    1Netconfig Login
    3Netconfig Login

     
     



  1.