Page History

...

1. Remote Desktop into the Lync Front End Server.
2. Launch the Lync Server Topology Builder.

3. In the left pane, right-click on the Branch Site and select New Branch Site as shown below:

   Panel
   borderStyle none
   Caption 0 Figure 1 New Branch Site Image Modified

4. Define the site name and click Next.
   Note: The computer name must be NetBIOS compliantwith a maximum length of 15 characters.

   Panel
   borderStyle none
   Caption 0 Figure 1 Define Site Name Image Modified

5. Enter the site details as shown below and click Next.

   Panel
   borderStyle none
   Caption 0 Figure 1 Site Details Image Modified

6. Click Finish.

   Panel
   borderStyle none
   Caption 0 Figure 1 Finish Image Modified

7. Enter the FQDN of the SBA as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Enter FQDN Image Modified

    

    

8. Select the Front End Pool.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Front End Pool Image Modified

9. If you have an Edge Server, select the Edge pool (or leave it blank) and click Next.

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Edge Server Image Modified

10. Define the PSTN gateway as shown below and click Finish.

    Panel
    borderStyle none
    Caption 0 Figure 1 Define PSTN Gateway Image Modified

11. In the left pane, Right-click the Lync Server 2013 and select Publish Topology to publish the newly created topology.

    Panel
    borderStyle none
    Caption 0 Figure 1 Publish Image Modified