Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_docset_workflow
APPRJIDSYM-21010
AUTH1
DEV1
LDEV1
SVT1
LSVT1
AUTHJIDSYM-20480

Sonus SBC 1000

The

Spacevars
0series
has three Ethernet ports used for communicating with the IP network. All SIP traffic is carried on these two ports. Unlike the SBC 2000, this model has no dedicated Management Port.

Info

The third Ethernet port on the SBC 1000 is available only if running SBC 1000 v2 hardware. For hardware details, see Sonus SBC 1000 Hardware Specifications.

Sonus SBC 2000

The

Spacevars
0series2
has four Ethernet ports and one Ethernet Management port. By default, each of the four non-management ports are in their own system created VLAN, and are isolated from one another.

ASM

If the unit is equipped with a built-in ASM, all ASM traffic is carried uniquely through this Ethernet port.

Info
iconfalse

For communication between the

Spacevars
0longproduct
and the ASM to work properly, the ASM port's Default Untagged VLAN must be set to a VLAN whose logical IP address is in the same subnet as the ASM's IP address. For example, if the ASM port's default VLAN is set to Ethernet 1 VLAN, then the logical interface Ethernet 1 IP must have its IP address in the same subnet as the ASM IP.

Working with Ethernet Ports:

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Node Interfaces > Ports. See below for examples.

 

...

width600px
SBC 1000 - Ports
Panel
borderStylenone
Caption
0Figure
1Ethernet Ports - SBC 1000 Example

Image Modified

...

SBC 2000 - Ports
Panel
borderStylenone
Caption
0Figure
1Ethernet Ports - SBC 2000 Example

...

Image Modified

To view a Ethernet Port's properties:

Include Page
_View_Entry_Values
_View_Entry_Values
nopaneltrue
Include Page
_Delete_Entry_Procedure
_Delete_Entry_Procedure
nopaneltrue

See also, Viewing Port Counters and Channel Details,

Children Display
depth3
styleh5