Page History

In this article, we illustrate how to configure the Sonus SBC 1000/2000 to

...

• Calling Party: PSTN phone 6228
• Called Party: Lync client with following AD profile:
  • userPrincipalName: baris@Sonus SBC 1000/2000DEMObaris@SBCDEMO.Sonus
  • homePhone: 3633
  • mobile: 6223
  • msRTCSIP-Line: tel:+15105743633;ext=3633
  • mail: Baris@uxdemo.net

Active Directory Related Setup

...

The AD query user must be a domain user. For this exercise, the following user is created in Sonus SBC 1000/2000DEMOSBCDEMO.Sonus domain where Lync is deployed.

• userPrincipalName: queryUser@Sonus SBC 1000/2000DEMOqueryUser@SBCDEMO.Sonus
• dn: CN=queryUser,OU=Lync Clients,DC=Sonus SBC 1000/2000DEMOSBCDEMO,DC=Sonus

Verification of Active Directory License

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to System > Licensing > Current Licenses.

3. Verify that the Active Directory feature is licensed as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Verify Active Directory License Image Modified

   Pagebreak

Domain Controller Settings

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Active Directory > Domain Controllers.
3. Add a domain controller.

   1. Configure the domain controller configuration items as shown below.

      Panel
      borderStyle none
      Caption 0 Figure 1 Domain Controller Settings Image Modified

Active Directory Configuration

...

AD Query Functionality Verification

...

Telephony Routing Setup

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Transformation.

3. Add an entry to the Transformation Table.

   Panel
   borderStyle none
   Caption 0 Figure 1 Transformation Table Entry Image Modified

     

   Pagebreak

4. In the left navigation pane, select the Transformation Table created in the previous step.

5. Add two entries as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add Two Entries Image Modified

    

    

   Panel
   Expand Click here to see detailed information on AD-based routing via the transformation table Click here to see detailed information on AD-based routing via the transformation table Caption 0 Figure 1 AD-based Routing via Transformation Table Image Modified

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Call Routing Table > (relevant entry).

3. Select the appropriate Transformation Table in the Number/Name Transformation Table list box as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Call Routing Table Image Modified

   Pagebreak

Verification of Call Routing using AD attributes

In order to properly verify the Sonus SBC 1000/2000 configuration, please follow these steps:

1. A PBX phone (6228) dials the Lync user's number (3633).
2. The call lands on the ISDN inbound Signaling Group on the Sonus SBC 1000/2000.
3. The call is then sent to the relevant Call Route Table Entry.
4. In the Call Route Entry, the incoming number is first transformed using the relevant call route entry (using the cached Active Directory user attributes) and is then routed to the relevant outbound Signaling Group.

...