Page History
| Add_workflow_for_techpubs | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Panel | ||||
|---|---|---|---|---|
In this section:
|
| Info |
|---|
These These instructions assume that your SWe Lite is upgraded to Release 7.0; the system must be running 7.0 to support 1, 2 or 4 vCPUs (depending on your license). See Working with Licenses. For details on hardware and software requirements, refer to: |
In Release 7.Starting in 7,0, the SWe Lite supports the following:
- For Memory (RAM) , valid settings are 1 GiB, 2 GiB, or 4 GiB: 1GiB, 2GiB, or 4GiB. Each SBC SWe Lite instance requires from 1GiB to 4GiB of RAM depending on the configuration.
- For vCPUs, valid settings are : 1, 2, or 4 CPUs.
...
| 0 | Figure |
|---|---|
| 1 | Memory required for number of vCPUs |
...
...
Adding vCPUs and Increasing RAM
SWe Lite on KVM Hypervisor
...
- Login into a terminal access software (such as Putty), and log into the KVM server.
- Start the Virtual Machine Manager.
- From the list, click on the applicable VM instance.
- Power down the VM.
- Select Edit > Virtual Machine Details
- Select View > Details or click the
icon From the menu, click CPUs.The SWe Lite supports 1, 2, or 4 vCPUs.
Caption 0 Figure 1 Add vCPUs 
- Click Apply.
From the menu, click Memory. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Memory Refer to SBC SWe Lite Hardware and Software Requirements.
Caption 0 Figure 1 Update Memory 
- Click Apply.
- Restart Start the VM instance. The SWe Lite is configured with the updated values.
To verify the updated values, see Verify Update on SWe Lite.
SWe Lite on Microsoft Hyper-V
| Note |
|---|
The VM instance must be powered down before updating memory and vCPU. |
- Launch Hyper-V Manager from the Windows Start menu.
- Power down the VM in which you will be adding vCPUs and RAM.
- Right-click on the desired VM instance and select Settings.
- Click on Memory. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Memory Refer to SBC SWe Lite Hardware and Software Requirements.
Caption 0 Figure 1 Add memory 
- Enter the desired memory and click OK.
Click on Processor. The SWe Lite supports 1, 2, or 4 vCPUs.
Caption 0 Figure 1 Add vCPUs 
- Enter the desired virtual processors and click OK.
- Start the VM instance. The SWe Lite is configured with the updated values.
To verify the updated values, see Verify Update on SWe Lite.
...
- Access vSphere Client.
- Click on the applicable VM instance
- Power down the VM.
- From the Getting Started tab, click Edit virtual machine settings.
From the Hardware tab, click Memory.
Caption 0 Figure 1 Add Memory 
- Update the desired memory size. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Memory Refer to SBC SWe Lite Hardware and Software Requirements.
From the Hardware tab, click CPUs.
Caption 0 Figure 1 Add vCPUs 
- Update the desired number of vCPUs. The SWe Lite supports 1, 2, or 4 vCPUs.
- Click OK.
- Restart Start the VM instance. The SWe Lite is configured with the updated values.
...
- Connect to the applicable SWe.
- In the WebUI, access System > Overview.
...
- Verify the number of
...
- Virtual CPUs and Total System Memory.
is updated:
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Overview
Content Tools