Table of Contents

 

 

Document Overview

This document provides a configuration guide for the Ribbon SBC 5000 (Session Border Controller) when connecting to CenturyLink.

This configuration guide supports features given in the Avaya Communication Manager 7.1 configuration guide.

Introduction

The interoperability compliance testing focuses on verifying inbound and outbound calls flows between the Ribbon SBC 5000 and CenturyLink.

Document History

 

DateNameComment
N/AN/AInitial Draft

Audience

This configuration guide is offered as a convenience to the Ribbon customers. The specifications and information regarding the product in this guide are subject to change without notice. All statements, information, and recommendations in this guide are believed to be accurate but are presented without warranty of any kind, express or implied, and are provided “AS IS”. Users must take full responsibility for the application of the specifications and information in this guide.

 

Requirements

The following equipment and software were used for the sample configuration provided:

 

 

Equipment

Software Version

Ribbon Communications

Ribbon SBC 5200
BMC
BIOS
SonusDB
EMA
Tenor

V7.00
V03.16.00-R000
V02.06.00
V07.00.00-R000
V07.00.00-R000

H/W Version: 1 [3 3 0 0][0 0 3 3]

S/W Version: P108-09-35

Third-party Equipment

Avaya Communication Manager 

Avaya System Manager 

7.1.2.0.0-FP2

7.1.2.0.0-FP2

OS

N/A

N/A

Other software

N/A

N/A

Reference Configuration

The following reference configuration shows connectivity between the third-party and the Ribbon SBC.

 

Reference Configuration

 

Support

For any questions regarding this document or the content herein, please contact your maintenance and support provider.

Technical support for the Ribbon SBC 5000 series is available either trough phone or logging a ticket.



Third-Party Product Features

Provide the list of features tested as part of this activity.

Prerequisites

Mention the prerequisites for this test.

Testing verified new configuration data in the following sections:

  1. Domain
  2. Location
  3. SIP Entity
  4. Entity Link
  5. Routing Policy
  6. Dial Pattern

 

 1. Domain

Select Home > Routing > Domains

Domain Management


2. Location

Select Home > Routing > Locations

Location for CM

 
 

3. SIP Entity

Select Home > Routing > SIP Entities

SIP Entity for CM


SIP Entity for CM

Select Home > Routing > Entity Links

Entity Link for CM


Entity Link for CM

 

5. Routing Policy

Select Home > Routing > Routing Policies

Route Policy for CM

Route Policy for CM

6. Dial Pattern

Select Home > Routing > Dial Patterns

Note

Use this procedure to create any required Dial Pattern configurations.

Dial Pattern for CM

Dial Pattern for CM

 

Avaya CM 7 Configuration

Testing verified new configuration data in the following sections:

  1. Node Name
  2. Signaling Group
  3. Trunk Group
  4. Route Pattern
  5. ARS Digit Analysis Table
  6. Station

1. Node Name

  1. Use the Site Administration to log into the Avaya CM 7.0.
  2. Type change node-names ip on the command line.  
  3. Press the Down Arrow key to move to a blank line, and then add the node name information.
  4. Press F3 to save the changes.

Node Name


2. Signaling Group

  1. Use the Site Administration to log into the Avaya CM 7.0.
  2. Type add signaling-group next on the command line. 

    Note

    The next switch auto-generates the next available group number for the Signaling Group, which is the most efficient method for creating a new Signaling Group.

  3. Confirm the next available Signaling Group information and press F3 to save the changes. For more details, refer to the Avaya CM 7.0 guide.

Signaling Group

 

3. Trunk Group

  1. Use the Site Administration to log into Avaya CM 7.0.
  2. Type add trunk-group next on the command line.
  3. Type the trunk group information and press F3 to save the changes. For more details, refer to the Avaya CM 7.0 guide.

Trunk Group

 

Trunk Group1

 

4. Route Pattern

  1. Use the Site Administration to log into the Avaya CM 7.0.
  2. Type list route-pattern on the command line to determine the next available route pattern.
  3. Identify the route-pattern number you are going to use, and then press F1 to exit the current operation.
  4. Type change route-pattern, and then type the available route pattern number. Press F3 to save the changes.

Route Pattern


5. ARS Digit Analysis Table

  1. Use the Site Administration to log into Avaya CM 7.0.
  2. Type change ars analysis (dialed numberto add or change the handling for a specified called number.
  3. Confirm the changes and press F3 to save. For more details, refer to the Avaya CM 7.0 guide.

ARS Digit Analysis Table


6. Station

  1. Use the Site Administration to log into Avaya CM 7.0.
  2. Type add station next to add a new station. 
  3. Confirm the changes and press F3 to save. For more details, refer to the Avaya CM 7.0 guide.

Station

Station1

Station2

 

Ribbon SBC 5000 Configuration

The following steps provide an example of how to configure the Ribbon SBC 5000.

 

Complete Configuration
#----------AVAYA Codecs----------#
set profiles media codecEntry G711u_Avaya codec g711 law ULaw packetSize 20
set profiles media codecEntry G711u_Avaya fax failureHandling continue toneTreatment none
set profiles media codecEntry G711u_Avaya modem failureHandling continue toneTreatment none
set profiles media codecEntry G711u_Avaya dtmf relay rfc2833 removeDigits enable

#----------CenturyLink Codecs----------#
set profiles media codecEntry G711u_CenturyLink codec g711 law ULaw packetSize 20 
set profiles media codecEntry G711u_CenturyLink fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry G711u_CenturyLink modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry G711u_CenturyLink dtmf relay rfc2833 removeDigits enable

set profiles media codecEntry G729_CenturyLink codec g729a packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry G729_CenturyLink fax failureHandling continue toneTreatment faxRelay 
set profiles media codecEntry G729_CenturyLink modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry G729_CenturyLink dtmf relay rfc2833 removeDigits enable

#----------Tenor fax codecs----------#
set profiles media codecEntry G711u_Tenor_T38 codec g711 law ULaw packetSize 20
set profiles media codecEntry G711u_Tenor_T38 fax failureHandling continue toneTreatment faxRelay
set profiles media codecEntry G711u_Tenor_T38 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry G711u_Tenor_T38 dtmf relay rfc2833 removeDigits enable

set profiles media codecEntry G729_Tenor_T38 codec g729a packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry G729_Tenor_T38 fax failureHandling continue toneTreatment ignoreDetectionAllowPeerToNegotiateFaxRelay
set profiles media codecEntry G729_Tenor_T38 modem failureHandling continue toneTreatment applyFaxTreatment
set profiles media codecEntry G729_Tenor_T38 dtmf relay rfc2833 removeDigits enable

############################# Internal Configuration (AVAYA) #############################

#----------IP Interface Group----------#
set addressContext default ipInterfaceGroup Private ipInterface Private-pkt0 ceName verdea portName pkt0 ipAddress 10.35.179.240 prefix 26
set addressContext default ipInterfaceGroup Private ipInterface Private-pkt0 mode inService state enabled

#----------IP Static Routes----------#
set addressContext default staticRoute 0.0.0.0 0 10.35.179.193 Private Private-pkt0 preference 100

#----------Packet Service Profile----------#
set profiles media packetServiceProfile Avaya_PSP rtcpOptions rtcp enable terminationForPassthrough enable enableRTCPForHeldCalls disable rtcpMux disable packetLossThreshold 0 rrBandwidth 250 rsBandwidth 250 packetLossAction none
set profiles media packetServiceProfile Avaya_PSP silenceInsertionDescriptor g711SidRtpPayloadType 13
set profiles media packetServiceProfile Avaya_PSP codec codecEntry1 G711u_Avaya, G729AB-DEFAULT
set profiles media packetServiceProfile Avaya_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711u,g729
set profiles media packetServiceProfile Avaya_PSP packetToPacketControl codecsAllowedForTranscoding otherLeg g711u,g729

#----------IP Signaling profiles----------#
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags disableMediaLockDown enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags includeReasonHeader enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags includeTransportTypeInContactHeader enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags relayDataPathModeChangeFromOtherCallLeg disable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags publishIPInHoldSDP enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags sendPtimeInSdp enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags sendRtcpPortInSdp enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes flags storePChargingVector enable
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes relayFlags notify enable refer enable statusCode4xx6xx disable referToHeaderRelay relayReferIfNoMatchForCallId
set profiles signaling ipSignalingProfile Avaya_IPSP commonIpAttributes transparencyFlags mwiBody enable unknownBody enable
set profiles signaling ipSignalingProfile Avaya_IPSP egressIpAttributes flags disable2806Compliance enable disableOptionalRegisterParameters enable
set profiles signaling ipSignalingProfile Avaya_IPSP egressIpAttributes numberPortabilityAttributes npdiOptions includeNpdiYes
set profiles signaling ipSignalingProfile Avaya_IPSP egressIpAttributes transport type1 tcp type2 udp
set profiles signaling ipSignalingProfile Avaya_IPSP ingressIpAttributes flags sendSdpIn200OkIf18xReliable enable sendSdpInSubsequent18x enable

#----------Signaling profiles----------#
set profiles signaling signalingProfile Avaya_SP egress egressFlags addPrefix011ForInternationalCalls enable convertNumbersToE164Format enable

#----------Transparency profile----------#
set profiles services transparencyProfile Avaya_TP sipMessageBody all excludedMethods register,invite,subscribe,info,publish,message,refer,options,update
set profiles services transparencyProfile Avaya_TP state enabled

#----------E164Profile----------#
set profiles signaling E164Profile CenturyLink_E164 sonusE164ProfCharStar allow sonusE164ProfCharHash allow sonusE164ProfCharHyphen allow

#----------ZONEs----------#
set addressContext default zone ZONE-INT-VoIP id 3

#----------SIP signaling ports----------#
set addressContext default zone ZONE-INT-VoIP sipSigPort 25 ipInterfaceGroupName Private ipAddressV4 10.35.179.241 portNumber 5060 transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp
set addressContext default zone ZONE-INT-VoIP sipSigPort 25 mode inService state enabled

#----------IPPEERs----------#
set addressContext default zone ZONE-INT-VoIP ipPeer Avaya_SIP_SERVER ipAddress 10.35.180.26 ipPort 5060
set addressContext default zone ZONE-INT-VoIP ipPeer Avaya_SIP_SERVER surrogateRegistration userPart 9525827883 authUserName 287101-9525827883 hostPart voip.centurylink.com regAuthPassword 1Tt8Lv0Uu1 retryTimer 900000 sendCredentials challengeForAnyMessage suppressRegRetryAfterAuthFail disabled useNextSurrRegForCall disabled useUserNameAsPAI disabled 
set addressContext default zone ZONE-INT-VoIP ipPeer Avaya_SIP_SERVER surrogateRegistration state enabled
set addressContext default zone ZONE-INT-VoIP ipPeer Avaya_SIP_SERVER authentication intChallengeResponse enabled incInternalCredentials enabled

#---------- sipTrunkGroup----------#
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG media mediaIpInterfaceGroupName Private sourceAddressFiltering disabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling messageManipulation inputAdapterProfile CenturyLink_HashIn
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG ingressIpPrefix 10.35.180.26 32
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG policy digitParameterHandling numberingPlan NANP_ACCESS
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG policy callRouting elementRoutingPriority ERP_CenturyLink
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG policy media packetServiceProfile Avaya_PSP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG policy signaling ipSignalingProfile Avaya_IPSP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG policy signaling signalingProfile Avaya_SP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG services transparencyProfile Avaya_TP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling E164Profiles e164LocalProfile CenturyLink_E164 e164GlobalProfile CenturyLink_E164
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling relayNonInviteRequest enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling validateAor enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling acceptHistoryInfo enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG signaling authentication intChallengeResponse enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG media msrp enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG media lyncShare enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup Avaya_TG state enabled mode inService

############################# FAX Configuration #############################

#----------Packet Service Profile----------#
set profiles media packetServiceProfile TENOR_FAX_PSP codec codecEntry1 G711u_Tenor_T38 codecEntry2 G729_Tenor_T38
set profiles media packetServiceProfile TENOR_FAX_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711u,g729,t38 otherLeg g711u,g729,t38
set profiles media packetServiceProfile TENOR_FAX_PSP packetToPacketControl transcode only
set profiles media packetServiceProfile TENOR_FAX_PSP rtcpOptions rtcp enable

#----------IP Signaling profiles----------#
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP ipProtocolType sipOnly
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP commonIpAttributes flags disableMediaLockDown enable includeReasonHeader enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable publishIPInHoldSDP enable sendPtimeInSdp enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP commonIpAttributes flags sendRtcpPortInSdp enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP commonIpAttributes relayFlags notify enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP commonIpAttributes transparencyFlags  mwiBody enable  unknownBody enable unknownHeader enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP ingressIpAttributes flags sendSdpIn200OkIf18xReliable enable sendSdpInSubsequent18x enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP egressIpAttributes flags disable2806Compliance enable
set profiles signaling ipSignalingProfile TENOR_FAX_IPSP egressIpAttributes transport type1 udp

#----------Signaling profiles----------#
set profiles signaling signalingProfile TENOR_FAX_SP egress egressFlags addPrefix011ForInternationalCalls enable convertNumbersToE164Format enable

#----------IPPEERs----------#
set addressContext default zone ZONE-INT-VoIP ipPeer TENOR_SIP_SERVER policy sip fqdnPort 0
set addressContext default zone ZONE-INT-VoIP ipPeer TENOR_SIP_SERVER ipAddress 10.35.137.43 ipPort 5084 defaultForIp false
set addressContext default zone ZONE-INT-VoIP ipPeer TENOR_SIP_SERVER authentication incInternalCredentials enabled
set addressContext default zone ZONE-INT-VoIP ipPeer TENOR_SIP_SERVER authentication intChallengeResponse enabled
set addressContext default zone ZONE-INT-VoIP ipPeer TENOR_SIP_SERVER surrogateRegistration userPart 4696806537 authUserName xxxxxxx-4696806537 regAuthPassword xxxx state disabled sendCredentials
challengeForAnyMessageAndInDialogRequests hostPart voip.centurylink.com

#---------- sipTrunkGroup----------#
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX media mediaIpInterfaceGroupName Private
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX signaling messageManipulation inputAdapterProfile CenturyLink_HashIn includeAppHdrs disabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX signaling rel100Support enabled acceptHistoryInfo enabled
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX ingressIpPrefix 10.35.137.43 32
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX policy callRouting elementRoutingPriority ERP_CenturyLink
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX policy digitParameterHandling numberingPlan CenturyLink_NANP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX policy media packetServiceProfile TENOR_FAX_PSP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX policy services classOfService DEFAULT_IP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX policy signaling ipSignalingProfile TENOR_FAX_IPSP signalingProfile TENOR_FAX_SP
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX services transparencyProfile CenturyLink
set addressContext default zone ZONE-INT-VoIP sipTrunkGroup TENOR_TG_FAX state enabled mode inService

############################# External Configuration (CenturyLink) #############################

#----------IP Interface Group----------#
set addressContext default ipInterfaceGroup Public ipInterface Public-pkt2 ceName verdea portName pkt2 ipAddress 216.110.2.226 prefix 28
set addressContext default ipInterfaceGroup Public ipInterface Public-pkt2 mode inService state enabled

#----------IP Static Routes----------#
set addressContext default staticRoute 216.206.0.0 16 216.110.2.225 Public Public-pkt2

#----------Packet Service Profile----------#
set profiles media packetServiceProfile CenturyLink_PSP typeOfService 160
set profiles media packetServiceProfile CenturyLink_PSP rtcpOptions terminationForPassthrough enable enableRTCPForHeldCalls disable rtcpMux disable packetLossThreshold 0 rrBandwidth 250 rsBandwidth 250 packetLossAction none
set profiles media packetServiceProfile CenturyLink_PSP rtcpOptions rtcp enable
set profiles media packetServiceProfile CenturyLink_PSP silenceInsertionDescriptor g711SidRtpPayloadType 13
set profiles media packetServiceProfile CenturyLink_PSP codec codecEntry1 G711u_CenturyLink, G729_CenturyLink
set profiles media packetServiceProfile CenturyLink_PSP packetToPacketControl codecsAllowedForTranscoding thisLeg g711u,g729,t38
set profiles media packetServiceProfile CenturyLink_PSP packetToPacketControl codecsAllowedForTranscoding otherLeg g711u,g729,t38

#----------IP Signaling profiles----------# 
set profiles signaling ipSignalingProfile CenturyLink_IPSP commonIpAttributes flags disableMediaLockDown enable includeReasonHeader enable minimizeRelayingOfMediaChangesFromOtherCallLegAll enable relayDataPathModeChangeFromOtherCallLeg disable publishIPInHoldSDP enable sendPtimeInSdp enable sendRtcpPortInSdp enable
set profiles signaling ipSignalingProfile CenturyLink_IPSP commonIpAttributes relayFlags notify enable refer enable referToHeaderRelay relayReferIfNoMatchForCallId
set profiles signaling ipSignalingProfile CenturyLink_IPSP commonIpAttributes transparencyFlags mwiBody enable unknownBody enable
set profiles signaling ipSignalingProfile CenturyLink_IPSP egressIpAttributes flags disable2806Compliance enable disableOptionalRegisterParameters enable
set profiles signaling ipSignalingProfile CenturyLink_IPSP egressIpAttributes privacy privacyInformation pAssertedId
set profiles signaling ipSignalingProfile CenturyLink_IPSP egressIpAttributes privacy flags includePrivacy enable
set profiles signaling ipSignalingProfile CenturyLink_IPSP egressIpAttributes transport type1 udp
set profiles signaling ipSignalingProfile CenturyLink_IPSP ingressIpAttributes flags sendSdpIn200OkIf18xReliable enable sendSdpInSubsequent18x enable

#----------Signaling profiles----------#
set profiles signaling signalingProfile CenturyLink_SP egress egressFlags addPrefix011ForInternationalCalls enable convertNumbersToE164Format enable

#----------Transparency profile----------#
set profiles services transparencyProfile CenturyLink_TP sipMessageBody all excludedMethods register,invite,subscribe,info,publish,message,refer,options,update
set profiles services transparencyProfile CenturyLink_TP state enabled

#----------dmPmRule----------#
set profiles digitParameterHandling dmPmCriteria CenturyLink_HashPrefix criteriaType digit digitType calledNumber parameterPresenceCheck exists
set profiles digitParameterHandling dmPmCriteria CenturyLink_HashPrefix digitCriteria digitMatch value startDigitPosition 0 numberOfDigits 3 matchValue 999
set profiles digitParameterHandling dmPmCriteria CenturyLink_HashPrefix digitCriteria digitMatch operation equals
set profiles digitParameterHandling dmPmCriteria CenturyLink_HashPrefix digitCriteria numberLength value 5 operation equals
 
set profiles digitParameterHandling dmPmRule CenturyLink_Hash_Add subRule 0 criteria CenturyLink_HashPrefix ruleType digit
set profiles digitParameterHandling dmPmRule CenturyLink_Hash_Add subRule 0 digitManipulation digitStringManipulation replacement type constant digitString calledNumber startDigitPosition 0 numberOfDigits 1 value #
set profiles digitParameterHandling dmPmRule CenturyLink_Hash_Add subRule 0 digitManipulation digitStringManipulation startDigitPosition 0 numberOfDigits 3 action none
set profiles digitParameterHandling dmPmRule CenturyLink_Hash_Add subRule 0 digitManipulation numberParameterManipulation natureOfAddress none numberingPlanIndicator none numberLength 3 presentation none screening none includeInEgress none
set profiles digitParameterHandling dmPmRule CenturyLink_Hash_Add subRule 0 digitManipulation numberType calledNumber

#----------prefixProfile Entry----------#
set profiles digitParameterHandling prefixProfile NA_DIAL_PLAN entry * 0 1 15 callType nationalType numberLeadingPrefixDigits 0 numberLeadingPrefixDigitsToStrip 0 applyDmRule disable determineArea disable

#----------ZONE----------#
set addressContext default zone ZONE-EXT-ACCESS id 20

#----------SIP signaling ports----------#
set addressContext default zone ZONE-EXT-ACCESS sipSigPort 10 ipInterfaceGroupName Public ipAddressV4 216.110.2.227 portNumber 5060 dscpValue 24 transportProtocolsAllowed sip-udp
set addressContext default zone ZONE-EXT-ACCESS sipSigPort 10 mode inService state enabled

#----------IPPEERs----------#
set addressContext default zone ZONE-EXT-ACCESS ipPeer CenturyLink_IPP ipAddress 216.206.64.91 ipPort 5100 defaultForIp false
set addressContext default zone ZONE-EXT-ACCESS ipPeer CenturyLink_IPP2 ipAddress 216.206.66.91 ipPort 5100 defaultForIp false

#----------sipTrunkGroups----------#
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG media mediaIpInterfaceGroupName Public
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy digitParameterHandling numberingPlan NANP_ACCESS
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy digitParameterHandling egressDmPmRule CenturyLink_Hash_Add
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy callRouting elementRoutingPriority ERP_CenturyLink
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy media packetServiceProfile CenturyLink_PSP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy signaling ipSignalingProfile CenturyLink_IPSP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG policy signaling signalingProfile CenturyLink_SP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG services transparencyProfile CenturyLink_TP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG signaling rel100Support enabled relayNonInviteRequest enabled validateAor enabled acceptHistoryInfo enabled
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG signaling authentication intChallengeResponse enabled authUserPart 287101-9525827883 authPassword 1Tt8Lv0Uu1
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG ingressIpPrefix 216.206.64.91 32
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG state enabled mode inService

set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 media mediaIpInterfaceGroupName Public
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy digitParameterHandling numberingPlan NANP_ACCESS
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy digitParameterHandling egressDmPmRule CenturyLink_Hash_Add
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy callRouting elementRoutingPriority ERP_CenturyLink
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy media packetServiceProfile CenturyLink_PSP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy signaling ipSignalingProfile CenturyLink_IPSP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 policy signaling signalingProfile CenturyLink_SP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 services transparencyProfile CenturyLink_TP
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 signaling rel100Support enabled relayNonInviteRequest enabled validateAor enabled acceptHistoryInfo enabled
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 signaling authentication intChallengeResponse enabled authUserPart 287101-9525827882 authPassword 5Rs7De1Su4
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 ingressIpPrefix 216.206.66.91 32
set addressContext default zone ZONE-EXT-ACCESS sipTrunkGroup CenturyLink_TG2 state enabled mode inService

############################# Global Configuration #############################

#----------elementRoutingPriority----------#
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry nationalOperator 3 entityType trunkGroup
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry nationalType 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry nationalType 2 entityType none
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry internationalType 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry internationalType 2 entityType none
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry userName 1 entityType trunkGroup
set profiles callRouting elementRoutingPriority ERP_CenturyLink entry userName 2 entityType none

#----------AVAYA Routing----------#
set global callRouting routingLabel TO_AVAYA_TG routePrioritizationType roundRobin action routes numRoutesPerCall 10
set global callRouting routingLabel TO_AVAYA_TG routingLabelRoute 0 routeType trunkGroup trunkGroup Avaya_TG ipPeer Avaya_SIP_SERVER proportion 100 cost 100 inService inService testing normal
set global callRouting routingLabel TO_AVAYA_TG routingLabelRoute 1 routeType trunkGroup trunkGroup Avaya_TG2 ipPeer Avaya_SIP_SERVER2 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_AVAYA_TG2 routePrioritizationType roundRobin action routes numRoutesPerCall 10
set global callRouting routingLabel TO_AVAYA_TG2 routingLabelRoute 0 routeType trunkGroup trunkGroup Avaya_TG2 ipPeer Avaya_SIP_SERVER2 proportion 100 cost 100 inService inService testing normal 
set global callRouting routingLabel TO_AVAYA_TG2 routingLabelRoute 1 routeType trunkGroup trunkGroup Avaya_TG ipPeer Avaya_SIP_SERVER proportion 0 cost 1000000 inService inService testing normal

set global callRouting route trunkGroup CenturyLink_TG VERDE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_AVAYA_TG
set global callRouting route trunkGroup CenturyLink_TG2 VERDE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_AVAYA_TG2

#----------CenturyLink Routing----------#
set global callRouting routingLabel TO_CenturyLink_TG routePrioritizationType roundRobin action routes numRoutesPerCall 10
set global callRouting routingLabel TO_CenturyLink_TG routingLabelRoute 0 routeType trunkGroup trunkGroup CenturyLink_TG ipPeer CenturyLink_IPP proportion 100 cost 100 inService inService testing normal
set global callRouting routingLabel TO_CenturyLink_TG routingLabelRoute 1 routeType trunkGroup trunkGroup CenturyLink_TG2 ipPeer CenturyLink_IPP2 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_CenturyLink_TG2 routePrioritizationType roundRobin action routes numRoutesPerCall 10
set global callRouting routingLabel TO_CenturyLink_TG2 routingLabelRoute 0 routeType trunkGroup trunkGroup CenturyLink_TG2 ipPeer CenturyLink_IPP2 proportion 100 cost 100 inService inService testing normal
set global callRouting routingLabel TO_CenturyLink_TG2 routingLabelRoute 1 routeType trunkGroup trunkGroup CenturyLink_TG ipPeer CenturyLink_IPP proportion 0 cost 1000000 inService inService testing normal

set global callRouting route trunkGroup Avaya_TG VERDE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_CenturyLink_TG
set global callRouting route trunkGroup Avaya_TG2 VERDE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_CenturyLink_TG2
set global callRouting route trunkGroup TENOR_TG_FAX VERDE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_CenturyLink_TG

#----------SMM----------#
set profiles signaling sipAdaptorProfile CenturyLink_HashIn state enabled
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 2 header name To
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 from value 999
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 to value To
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 regexp string %23
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 1 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 2 header name Request-Line
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 from value 999
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 to value Request-Line
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_HashIn rule 2 action 1 regexp string %23

set profiles signaling sipAdaptorProfile CenturyLink_TG1 state enabled
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 2 header name P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 action 1 operation delete
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 1 action 1 to value P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 2 header name P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 criterion 2 header condition absent
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 operation add
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 headerPosition last
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 from value <sip:9525827882@voip.centurylink.com>
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 2 action 1 to value P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 1 message messageTypes request
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 1 message methodTypes register
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 2 header name Request-Line
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 3 type token
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 3 token
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 3 token condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 criterion 3 token tokenType urihostname
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 type token
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 from value 216.206.66.91
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 to type token
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 to tokenValue urihostname
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 regexp string voip.centurylink.com
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 3 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 2 header name From
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 from value anonymous@anonymous.invalid
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 regexp string anonymous@216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 from value anonymous@anonymous.invalid
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 regexp string Restricted@216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 4 action 2 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 2 header name Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 from value sip:anonymous@anonymous.invalid:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 to value Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 regexp string sip:anonymous@216.110.2.227:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 from value sip:anonymous@anonymous.invalid:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 to value Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 regexp string sip:Restricted@216.110.2.227:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 5 action 2 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 2 header name From
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 from value voip.centurylink.com
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 regexp string 216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG1 rule 6 action 1 regexp matchInstance all

set profiles signaling sipAdaptorProfile CenturyLink_TG2 state enabled
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 2 header name P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 action 1 operation delete
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 1 action 1 to value P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 2 header name P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 criterion 2 header condition absent
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 operation add
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 headerPosition last
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 from value <sip:9525827883@voip.centurylink.com>
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 2 action 1 to value P-Asserted-Identity
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 1 message messageTypes request
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 1 message methodTypes register
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 2 header name Request-Line
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 3 type token
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 3 token
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 3 token condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 criterion 3 token tokenType urihostname
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 type token
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 from value 216.206.64.91
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 to type token
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 to tokenValue urihostname
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 regexp string voip.centurylink.com
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 3 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 2 header name From
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 from value anonymous@anonymous.invalid
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 regexp string anonymous@216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 from value anonymous@anonymous.invalid
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 regexp string Restricted@216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 4 action 2 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 1 message messageTypes all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 2 header name Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 from value sip:anonymous@anonymous.invalid:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 to value Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 regexp string sip:anonymous@216.110.2.227:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 1 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 from value sip:anonymous@anonymous.invalid:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 to value Contact
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 regexp string sip:Restricted@216.110.2.227:5060
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 5 action 2 regexp matchInstance all
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 applyMatchHeader one
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 1 type message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 1 message
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 1 message messageTypes requestAll
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 2 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 2 header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 2 header name From
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 criterion 2 header condition exist
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 operation regsub
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 from
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 from type value
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 from value voip.centurylink.com
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 to
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 to type header
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 to value From
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 regexp
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 regexp string 216.110.2.227
set profiles signaling sipAdaptorProfile CenturyLink_TG2 rule 6 action 1 regexp matchInstance all

 

Test Results

 

External IDTitleDescriptionTest SetupStatus (Passed or Failed etc)Comments
g729-001Anonymous Call Rejection ActivatePBX User dials *77
PSTN Calls PBX User with Caller ID Block
Should receive an announcement
  1. *77 is Dialed PBX and leaves.
  2. PBX Phones gets an announcement.
  3. Calling Party blocks caller ID.
  4. Calling party makes a call to PBX User.
  5. Calling Party receives an announcement when PBX user is dialed.
Passed 
g729-002Anonymous Call Rejection Deactivate PBX User dials *87
PSTN Calls PBX User with Caller ID block
Call Should Complete
  1. *87 is dialed PBX.
  2. User receives and announcement.
  3. PSTN calls PBX User.
  4. PSTN Phone receives ringback.
  5. PBX Phone gets ringing.
  6. PBX Phone get Caller ID.
  7. PBX Phone answer the Call.
  8. 2 way audio is received.
  9. PBX Phone releases Calls.
  10. PSTN receives a Bye.
Passed 
g729-003Anonymous Call PBX-BW PBX sends anonymous call to BW
BW delivers the calls Private or unknown or anonymous to PSTN
  1. PBX is configured to send a call to BW as anonymous with TN as PSTN.
  2. BW delivers the call to PSTN as Private or Anonymous.
  3. PSTN phone shows the call as Private or Anonymous.
  4. Call is answered by PSTN.
  5. PBX user hangs up the call.
Passed 
g729-004Alien TNs A call PBX call originate where the from TN that is not part of the customer trunk group.  As long as the pilot number is identified in outgoing call by PAI, the BroadWorks will accept and route the call.
  1. After Alien TN is set up on a Trunk in CenturyLink Network PBX.
  2. User Places a Call to PSTN.
  3. PBX User receives ringback.
  4. PSTN receives ringing.
  5. PSTN receives caller id of the Alien TN.
  6. PSTN answers the call.
  7. 2 way audio is received.
  8. PBX Phone releases Calls.
  9. PSTN receives a Bye
Passed 
g729-005Barge In Create a Pick Up Group with 2 PBX Users
PSTN Calls PBX User 1
PBX User 2 dials *33 +PBX User Ext
PSTN, User 1, and User 2 should be conf
  1. PSTN calls PBX User 1.
  2. PSTN Phone receives ringback.
  3. PBX Phone gets ringing.
  4. PBX Phone get Caller ID.
  5. PBX Phone answer the Call.
  6. 2 way audio is received.
  7. PBX User 2 Dials *33 + PBX User 1 Extension.
  8. PSTN, PBX User 1, and PBX User 2 are conferenced together.
  9. 2 Way Audio is heard by all Legs.
  10. PBX User 1 drops from Call.
  11. 2 way Audio is heard by PSTN and PBX User 2.
  12. PSTN drops call.
  13. PBX User 2 receives a Bye.
Passed 
g729-006Barge In Exempt In the Portal Enable Barge In Exempt
Create a Pick Up Group with 2 PBX Users
PSTN Calls PBX User 1
PBX User 2 dials *33 +PBX User Ext
User 2 Should not be conf
  1. Barge in Exempt is set on PBX user 1.
  2. PSTN calls PBX User 1.
  3. PSTN Phone receives ringback.
  4. PBX Phone gets ringing.
  5. PBX Phone get Caller ID.
  6. PBX Phone answer the Call.
  7. 2 way audio is received.
  8. PBX User 2 Dials *33 + PBX User 1 Extension.
  9. PBX user 2 is not allowed to barge in PSTN drops the call.
  10. PBX User 1 receives a Bye.
Passed 
g729-009Call Forwarding Always Activate PBX User dials *72
Enter the CFA Destination TN
PSTN calls PBX User with CFA
  1. PBX User 1 Dials *72.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. PSTN Calls PBX User 1.
  7. PSTN receives ringback.
  8. PBX User 1 does not ring.
  9. PBX User 2 gets ringing.
  10. PBX user 2 receives Caller ID (PSTN Originator Caller).
  11. PBX User answers call.
  12. 2 way Audio.
  13. PSTN releases call.
  14. PBX User 2 receives a Bye
Passed 
g729-010Call Forwarding Always InterrogatePBX User with CFA dials
*21*
Announcement received
  1. PBX User 1 Dials *21*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-011Call Forwarding Always  Deactivate PBX User with CFA dials *73
PSTN Calls PBX User 
  1. PBX User 1 Dials *73.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-012Call Forwarding Always to Voicemail Activate PBX User Dials *21
PSTN Dials PBX User with CFA
Verify Call goes to Voicemail
  1. PBX User 1 Dials *21.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. PSTN User Calls PBX User 1.
  5. Call should go directly to voicemail.
  6. Announcement is Heard.
  7. Leave voicemail.
  8. After leaving voicemail PSTN should receive a Bye.
  9. PBX User 1 should receive and MWI.
Passed 
g729-013Call Forwarding Always to Voicemail Deactivate PBX User with CFA dial #21
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #21.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-014PSTN call is CFB to PSTN with ID RestrictedPBX configured to send CFB to BW for identified Station.
BW is configured with CFB to PSTN2.
PSTN 1 Calls PBX  with Caller ID Restricted
PSTN 1 hears ring back
PBX send 486 Busy to BW
BW forwards the call to PSTN2
PSTN 2 hears ringing
PSTN 2 Caller ID displays Private/Anonymous
PSTN 2 Answers the call.
Two way voice path is established between PSTN 1 and PSTN 2
PSTN 2 hangs up
PSTN2 should receive Private/Anonymous as CLIDPassed 
g729-015PSTN with Privacy call to PBX is CFA to PSTN PBX User  is configured  with CFA to PSTN 2
PSTN 1 Calls PBX  with Caller ID Restricted
PSTN 1 hears ring back
PBX sends a new call to BW with PSTN 2 Number, From as Anonymous and PAI set to Pilot Number
BW forwards the call to PSTN2
PSTN 2 hears ringing
PSTN 2 Caller ID displays Pilot Number
PSTN 2 Answers the call.
Two way voice path is established between PSTN 1 and PSTN 2
PSTN 2 hangs up
Pilot Number should be shown as CLID on PSTN2Passed 
g729-016Call Forwarding Busy ActivatePBX User dials *90
Enter the CFB Destination TN
PSTN calls PBX User with CFB
  1. PBX User 1 Dials *90.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. Busy PBX User 1.
  7. PSTN Calls PBX User 1.
  8. PSTN receives ringback.
  9. PBX User 1 does not ring.
  10. PBX User 2 gets ringing.
  11. PBX user 2 receives Caller ID (PSTN Originator Caller).
  12. PBX User answers call.
  13. 2 way Audio.
  14. PSTN releases call.
  15. PBX User 2 receives a Bye
Passed 
g729-017Call Forwarding Busy Interrogate PBX User with CFB dials
*67*
Announcement received
  1. PBX User 1 Dials *67*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-018Call Forwarding Busy Deactivate PBX User with CFB dials *91
PSTN Calls PBX User 
  1. PBX User 1 Dials *91.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-019Call Forwarding Busy to Voicemail ActivatePBX User Dials *40
PSTN Dials PBX User with CFB
Verify Call goes to Voicemail
  1. PBX User 1 Dials *40.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. Busy PBX User 1.
  5. PSTN User Calls PBX User 1.
  6. Call should go directly to voicemail.
  7. Announcement is Heard.
  8. Leave voicemail.
  9. After leaving voicemail PSTN should receive a Bye.
  10. PBX User 1 should receive and MWI.
Passed 
g729-020Call Forwarding Busy to Voicemail Deactivate PBX User with CFB dial #40
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #40.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye
Passed 
g729-021Call Forwarding No Answer Activate PBX User dials *92
Enter the CFNA Destination TN
PSTN calls PBX User with CFNA
  1. PBX User 1 Dials *92.
  2. Announcement is heard.
  3. PBX User enters PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. PSTN Calls PBX User 1.
  7. PSTN receives ringback.
  8. PBX User 1 gets ringing.
  9. PBX User 1 receives Caller ID.
  10. After timer is RNA is received.
  11. PBX User 2 gets ringing.
  12. PBX user 2 receives Caller ID.
  13. PBX User 2 answers call.
  14. 2 way Audio.
  15. PSTN releases call.
  16. PBX User 2 receives a Bye
Passed 
g729-022Call Forwarding No Answer- RNA TimerPBX User dials *610
Enter 1 #
PSTN calls PBX User with CFNA
Verify Call is forwarded
  1. PBX User 1 Dials *610.
  2. Announcement is Heard.
  3. PBX User enter 1 for amount of Rings.
  4. After announcement completes PBX User 1 receives a Bye.
  5. PSTN Calls PBX User 1.
  6. PSTN receives ringback.
  7. PBX User 1 gets ringing.
  8. PBX User 1 receives Caller ID.
  9. After timer is RNA is received.
  10. PBX User 2 gets ringing.
  11. PBX user 2 receives Caller ID.
  12. PBX User 2 answers call.
  13. 2 way Audio.
  14. PSTN releases call.
  15. PBX User 2 receives a Bye.
PassedCannot set up 1 ring, just 0 or 2 to 20, so 2 was used
g729-023Call Forwarding No Answer Interrogate PBX User with CFNA dials
*61*
Announcement received
  1. PBX User 1 Dials *61*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye
Passed 
g729-024Call Forwarding No Answer Deactivate PBX User with CFNA dials *93
PSTN Calls PBX User 
  1. PBX User 1 Dials *93.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-025Call Forwarding No Answer to Voicemail ActivatePBX User Dials *41
PSTN Dials PBX User with CFNA
Verify Call goes to Voicemail
  1. PBX User 1 Dials *41.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. Busy PBX User 1.
  5. PSTN User Calls PBX User 1.
  6. Call should go to voicemail after RNA timer is reached.
  7. Announcement is Heard.
  8. Leave voicemail.
  9. After leaving voicemail PSTN should receive a Bye.
  10. PBX User 1 should receive and MWI
Passed 
g729-026Call Forwarding No Answer to Voicemail Deactivate PBX User with CFNA dial #41
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #41.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-027Call Forwarding Not Reachable Activate PBX User dials *94
Enter the CFNR Destination TN
Unregister Pilot TNs
PSTN calls PBX User with CFNR
Verify Call is forwarded
Register Pilot TNs
  1. PBX User 1 Dials *94.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. Unplug SBC Lan Cable.
  7. PSTN Calls PBX User 1.
  8. PSTN receives ringback.
  9. PBX User 1 does not ring.
  10. PSTN User 2 gets ringing.
  11. PSTN user 2 receives Caller ID (PSTN Originator Caller).
  12. PSTN User answers call.
  13. 2 way Audio.
  14. PSTN User 1 releases call.
  15. PSTN User 2 receives a Bye.
Passed 
g729-028Call Forwarding Not Reachable Interrogate PBX User with CFNR dials
*63*
Announcement received
  1. PBX User 1 Dials *63*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-029Call Forwarding Not Reachable DeactivatePBX User with CFNR dials *95
PSTN Calls PBX User 
  1. PBX User 1 Dials *95.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g729-030Call Forwarding Selective ActivateLog into Portal and set up Call forward selective User with a PSTN Number
PBX User with CFS enters #76
PSTN User calls PBX User with CFS
Call should be call forwarded
  1. Log into Portal and set up Call forward selective User with a PSTN Number.
  2. PBX User with CFS dials #76.
  3. Announcement received.
  4. PBX User receives a Bye.
  5. From a Selected PSTN Dial PBX User 1.
  6. PBX User should not Ring.
  7. Call should be call forwarded to the CFS Destination.
  8. PSTN receives Ringback.
  9. Destination receives Ringing.
  10. Destination receives Caller ID (Originator PSTN).
  11. Destination answers call.
  12. 2 way Audio.
  13. PSTN ends the call.
  14. Destination receives a Bye.
Passed 
g729-031Call Forwarding Selective DeactivatePBX User with CFS enters #77
PSTN User calls PBX User
Call should not be forwarded
  1. PBX User 1 Dials #77.
  2. Announcement is heard.
  3. PBX Receives a Bye.
  4. PSTN Calls PBX User 1.
  5. PSTN receives ringback.
  6. PBX User 1 gets ringing.
  7. PBX user 1 receives Caller ID.
  8. PBX User answers call.
  9. 2 way Audio.
  10. PSTN releases call.
  11. PBX User 2 receives a Bye.
Passed 
g729-033Consultative Transfer with SIP REFER PBX User Calls PSTN
PBX User transfers PSTN to PSTN2
PBX User has Audio with PSTNs
PSTN 1 has MOH
PBX User Transfers Call
PSTN and PSTN2 now have audio
 Passed 
g729-034Unattended Transfer with SIP REFER PBX User Calls PSTN
PBX User transfers PSTN to PSTN2
During Ringback PBX User transfers
PSTN 1 has MOH
PSTN2 answers call
PSTN and PSTN2 now have audio
 Passed 
g729-035Consultative Transfer  PBX User Calls PSTN
PBX User transfers PSTN to PBX User 2
PBX User 1 has Audio with PBX User 2
PSTN 1 has MOH
PBX User Transfers Call
PSTN and PBX 2 now have audio

1. PBX User 1 Calls PSTN.

2.PBX User receives Ringback.

3. PSTN 1 receives Ringing.

4. PSTN 1 receives Caller ID.

5. PSTN 1 answers.

6. 2 way Audio.

7. PBX User transfers call to PBX User 2.

8. PSTN User gets MOH

9. PBX User 1 gets Dial tone.

10. PBX User 1 dials PBX User 2 Extension.

11. PBX User 1 receives Ringback.

12. PBX User 2 receives Ringing.

13. PBX User 2 receives Caller ID of PBX User 1.

14. PBX User 2 answers the Call.

15. 2 way Audio.

16. PBX User 1 transfers the call.

17. MOH Ends.

18. PSTN 1 and PBX User 2 are now connected.

19. 2 Way Audio.

20. PSTN 1 Ends the call.

21. PBX User 2 receives the Bye.

Passed 
g729-036Unattended Transfer PBX User Calls PSTN
PBX User transfers PSTN to PBX User 2
During Ringback PBX User transfers
PSTN 1 has MOH
PBX User 2 answers call
PSTN and PBX User 2 now have audio
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PBX User transfers call to PBX User 2.
  8. PSTN User gets MOH.
  9. PBX User 1 gets Dial tone.
  10. PBX User 1 dials PBX User 2 Extension.
  11. PBX User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PSTN 1.
  14. PBX User 1 release call.
  15. PBX User 2 answers the Call.
  16. MOH Ends.
  17. 2 way Audio.
  18. PSTN 1 release the call.
  19. PBX User 2 receives the Bye
Passed 
g729-037Call Waiting Persistent ActivatePBX User dials *43
PSTN Calls PBX User
PSTN 2 Calls PBX User
Verify Call Waiting Tone
  1. PBX User 1 Dials *43.
  2. Announcement is heard.
  3. PBX Receives a Bye.
  4. PSTN User 1 Calls PBX User 1.
  5. PSTN User 1 receives ringback.
  6. PBX User 1 gets ringing.
  7. PBX user 1 receives Caller ID.
  8. PBX User answers call.
  9. 2 way Audio.
  10. PSTN User 2 Calls PBX User 1.
  11. PSTN User 2 receives ringback.
  12. PBX User 1 receives caller ID.
  13. PBX User 1 hear Call Waiting Tone.
  14. PBX User Places PSTN User 1 on Hold.
  15. PSTN User 1 hears MOH.
  16. PBX User 1 answers Call from PSTN 2.
  17. 2 way Audio.
  18. Verify PBX User 1 can swap between to callers.
  19. While on PBX User 1 and PSTN User 1.
  20. PSTN 1 releases Call.
  21. PBX User 1 receives a Bye.
  22. Call 2 should still be up with PSTN 2 hearing MOH.
Passed 
g729-038Call Waiting Persistent DeactivatePBX User Dials #43
PSTN Calls PBX User
PSTN 2 Calls PBX User
Call 2 should go to voicemail
  1. PBX User 1 Dials #43.
  2. Announcement is heard.
  3. PBX User 1 Receives a Bye after Announcement is completed.
  4. PSTN User Calls PBX User 1.
  5. PSTN User 1 Calls PBX User 1.
  6. PSTN User 1 receives ringback.
  7. PBX User 1 gets ringing.
  8. PBX user 1 receives Caller ID.
  9. PBX User 1 answers call.
  10. 2 way Audio.
  11. PSTN User 1 releases the call.
  12. PBX User 1 receives a Bye.
PassedPSTN2 gets Busy tone. Call goes to Voicemail just in case that Call Forwarding Busy to Voicemail is activated.
g729-039Customer Originated Trace PSTN Calls PBX User
PBX User Answers the Call
PBX User Hangs up call
PBX User enters *57
Verify announcement
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN releases call.
  8. PBX User 2 receives a Bye.
  9. PBX User 1 Dial *57.
  10. Announcement received.
  11. Announcement Completes.
  12. PBX User receives a Bye.
Passed 
g729-040Enhanced Call Logs Log into portal and verify Call logs
  1. Log into the portal for PBX User 1.
  2. On main screen verify calls Logs are displayed:
Missed
Received
Placed.
Passed 
g729-041Last Number Redial PBX User dials *66
The last number dialed should be called
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN releases call.
  8. PBX User 1 receives a Bye.
  9. PBX User 1 Dial *66.
  10. PSTN receives ringback.
  11. PBX User 1 gets ringing.
  12. PBX user 1 receives Caller ID.
  13. PBX User answers call.
  14. 2 way Audio.
  15. PSTN releases call.
  16. PBX User 1 receives a Bye
Passed 
g729-042MOH Verify MOH for conference, transfer, and hold
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PBX User 1 Places call on Hold.
  8. PSTN receives MOH.
  9. PBX User retrieves call from Hold.
  10. 2 way Audio.
  11. PSTN releases call.
  12. PBX User 2 receives a Bye.
Passed 
g729-043Remote Office  - Like CFAProvision Remote office for a SIP Trunk user on the BroadWorks portal to use PSTN number A. Place a call from a PSTN number B to the SIP Trunk user's DID and verify that it is forwarded to PSTN number A (the destination configured in BroadWorks). 
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. PSTN User 2 Calls PBX User 1.
  4. PSTN 2 receives ringback.
  5. PSTN User 1  gets ringing with PSTN 2 Caller ID and Diversion header for PBX User1.
  6. PSTN User 1 answers call.
  7. 2 way Audio.
  8. PSTN 1 releases call.
Passed 
g729-044Remote Office - Quick CallProvision Remote office for a SIP Trunk user 1 on the BroadWorks portal to use PSTN number A. On the BW portal,  Manage Users, select Configure Features of User 1, under Quick Call, add PSTN B number and click on the Call Button. PSTN A should Start Ringing with PBX User 1 Caller ID.  
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. Initiate a Quick Call to PSTN 2 on the portal.
  4. PSTN User 1  gets ringing with PBX User 1  Caller ID.
  5. PSTN user 1 answers the call.
  6. Now PSTN2 should start ringing with PBX User1 as Caller ID.
  7. PSTN 1 might hear ringback based on how long PSTN 2 rings.
  8. PSTN 2 answers the call.
  9. 2 way Audio.
  10. PSTN 1 releases call
Passed 
g729-045Remote Office - Click to  CallProvision Remote office for a SIP Trunk user 1 on the BroadWorks portal to use PSTN number A. On the BW portal,  Manage Users, select Configure Features of User 1, under Call Logs, select either incoming/outgoing/missed calls and  Click on a  Call under "Phone Number Click To call" column. PSTN A should Start Ringing with PBX User 1 Caller ID.  
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. Review call logs and identify a call log that needs to be called via Click to Call.
  4. Click on the identified call log under "Click to Call".
  5. PSTN User 1  gets ringing with PBX User 1  Caller ID.
  6. PSTN user 1 answers the call.
  7. Now PSTN2 should start ringing with PBX User1 as Caller ID.
  8. PSTN 1 might hear ringback based on how long PSTN 2 rings.
  9. PSTN 2 answers the call.
  10. 2 way Audio.
  11. PSTN 1 releases call.
Passed 
g729-046Selective Call Acceptance Provision selective call acceptance in the BroadWorks portal. Place a call from an accepted TN to the SIP Trunk User. Verify that the call completes normally. Place a call from a TN that is not on the accept list and verify that the call does not reach the  SBC.
  1. Log into the portal for PBX User 1.
  2. Set up Selected Call Acceptance to PSTN Number 1.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. PBX User answers call.
  8. 2 way Audio.
  9. PSTN releases Call.
  10. PBX User 1 receives a Bye.
PassedPSTN number 6840 was configured
g729-047Selective Call Rejection Provision selective call rejection in the BroadWorks portal. Place a call from a TN not on the reject list to the SIP Trunk User. Verify that the call completes normally. Place a call from a TN that is on the reject list and verify that the call does not reach the SBC.
  1. Log into the portal for PBX User 1.
  2. Set up Selected Call rejection to PSTN Number 1.
  3. PSTN Calls PBX User 1.
  4. Verify PSTN gets an announcement.
  5. PSTN receives a Bye.
PassedPSTN number 6840 was configured
g729-048Sequential RingProvision sequential ring in the BroadWorks portal. Place a call to the SIP trunk user. Verify that the numbers in the sequential ring list are dialed in order.
  1. Log into the Portal for PBX User 1.
  2. Set up Sequential Ring with PBX User 2 and PBX User 3.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. After RNA Timer PBX User 1 receives a Cancel.
  8. PBX User 2 gets ringing.
  9. PBX user 2 receives Caller ID.
  10. After RNA Timer PBX User 1 receives a Cancel.
  11. PBX User 3 gets ringing.
  12. PBX user 3 receives Caller ID.
  13. PBX User 3 answers call.
  14. 2 way Audio.
  15. PSTN releases Call.
  16. PBX User 3 receives a Bye.
Passed614-698-4918, 614-698-4919, 614-698-4916
g729-049Simultaneous Ring Provision Simultaneous ring in the BroadWorks portal. Place a call to the SIP trunk user. Verify that the numbers in the Simultaneous ring list are dialed at once.
  1. Log into the Portal for PBX User 1.
  2. Set up Simultaneous Ring with PBX User 2 and PBX User 3.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. PBX User 2 gets ringing.
  8. PBX user 2 receives Caller ID.
  9. PBX User 3 gets ringing.
  10. PBX user 3 receives Caller ID.
  11. PBX User 3 Answers Call.
  12. PBX User 1 and 2 receive a Cancel.
  13. 2 way Audio.
  14. PSTN releases Call.
  15. PSTN User 3 receives a Bye.
Passed 
g729-050Third Party MWI Control NOTIFY  Provision Third Party MWI in the BroadWorks portal. Provision the CT Voice Mail system to notify BroadWorks of unread messages in the user's voice mail box. Confirm that the NOTIFY is sent to BroadWorks and that the NOTIFY is sent to the PBX.
  1. PSTN User Calls PBX User 1.
  2. Call should go to voicemail after RNA timer is reached.
  3. Announcement is Heard.
  4. Leave voicemail.
  5. After leaving voicemail PSTN should receive a Bye.
  6. PBX User 1 should receive and MWI.
  7. PBX User 1 dials *86.
  8. Log into Mailbox.
  9. Listen To Voicemail.
  10. Delete Voicemail.
  11. Verify MWI is gone.
  12. PBX User 1 ends the Call.
PassedCall Forwarding No Answer to Voicemail is activated to send PSTN user 1 to voicemail after timer
g729-051Voice Mail ConsultationProvision Voice Mail n the BroadWorks or NYMPH portal. Provision the PBX to forward calls to an external voice mail system as the user's call coverage. Confirm the PBX user's capability to retrieve voice mail from the external Voice Mail system.
  1. PSTN User Calls PBX User 1.
  2. Call should go to voicemail after RNA timer is reached.
  3. Announcement is Heard.
  4. Leave voicemail.
  5. After leaving voicemail PSTN should receive a Bye.
  6. PBX User 1 should receive and MWI.
  7. PBX User 1 dials *86.
  8. Log into Mailbox.
  9. Listen To Voicemail.
  10. Delete Voicemail.
  11. Verify MWI is gone.
  12. PBX User 1 ends the Call.
Passed 
g729-052PBX Initiate ConferencePBX User Calls PSTN
PBX User Conferences PBX User 2
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PBX User conferences call to PBX User 2.
  8. PSTN User gets MOH.
  9. PBX User 1 gets Dial tone.
  10. PBX User 1 dials PBX User 2 Extension.
  11. PBX User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PBX User 1.
  14. PBX User 2 answers the Call.
  15. 2 way Audio.
  16. PBX User 1 conferences the call.
  17. MOH Ends.
  18. PSTN 1, PBX User 1 and PBX User 2 are now connected.
  19. 2 Way Audio.
  20. PBX User 1 Ends the call.
  21. PBX User 2 and PSTN receives the Bye.
Passed 
g729-053PSTN Initiate ConferencePBX User calls PSTN
PSTN conferences PBX User2
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PSTN User 1 conferences call to PBX User 2.
  8. PBX User 1 gets MOH.
  9. PSTN User 1 gets Dial tone.
  10. PSTN User 1 dials PBX User 2 Extension.
  11. PSTN User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PSTN User 1.
  14. PBX User 2 answers the Call.
  15. 2 way Audio.
  16. PSTN User 1 conferences the call.
  17. MOH Ends.
  18. PSTN 1, PBX User 1 and PBX User 2 are now connected.
  19. 2 Way Audio.
  20. PSTN User 1 Ends the call.
  21. PBX User 1 and PBX User 2 Still Have Audio.
  22. PBX User 1 End the Call.
  23. PBX User 2 receives a Bye.
Passed 
g729-057PBX to PBXPBX User Calls PBX User2 Same Trunk
Verify RTP is dropped to SBC
  1. PBX User 1 Calls PBX User 2.
  2. PBX  User 1 receives ringback.
  3. PBX User 2 gets ringing.
  4. PBX user 2 receives Caller ID.
  5. PBX User 2 answers call.
  6. 2 way Audio RTP is on SBC/PBX.
  7. PBX User 1 End the call.
  8. PBX User 2 receives a Bye.
Passed 
g729-058PSTN to PBXPSTN to PBX User
  1. PSTN User 1 Calls PBX User 1.
  2. PSTN User 1 receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN User Ends The Call.
  8. PBX User 1 receives a Bye.
Passed 
g729-059PBX to PSTNPBX User to PSTN
  1. PBX User 1 Calls PSTN User 1.
  2. PBX User 1 receives ringback.
  3. PSTN User 1 gets ringing.
  4. PSTN user 1 receives Caller ID.
  5. PSTN User answers call.
  6. 2 way Audio.
  7. PSTN User Ends The Call.
  8. PBX User 1 receives a Bye.
Passed 
g729-060PBX to PBX Different PBX (diff realm)PBX User to PBX User Different PBX (diff realm)
  1. PBX User 1 Calls PBX User 2 Diff Realm.
  2. PBX  User 1 receives ringback.
  3. PBX User 2 gets ringing.
  4. PBX user 2 receives Caller ID.
  5. PBX User 2 answers call.
  6. 2 way Audio RTP.
  7. PBX User 1 End the call.
  8. PBX User 2 receives a Bye.
Passed 
g729-065PBX to PSTN - Packet Marking for SIG packetsPBX to PSTN Call to verify that signaling packets are marked with DSCP = 24 (0x18)All outgoing SIP Signaling packets are marked with DSCP=24Passedsame as TC062
g729-066PBX to PSTN - Packet Marking for RTP packetsPBX to PSTN Call to verify that rtp packets are marked with DSCP = 40 (0x28)All outgoing SIP RTP packets are marked with DSCP=40Passedsame as TC062
g729-067PBX to PSTN - Directory assistancePBX User Calls PBX 411 and speaks with directory assistant
  1. PBX User 1 dials 411.
  2. Call is delivered to Directory Assistant for enquiry.
  3. Once the user hears an announcement or speaks with an operator, PBX user hangs up the call.
PassedPBX user dials *411
g729-068PBX to PSTN - Toll FreePBX User Calls 800.366.8201 to test toll free numbers
  1. PBX User 1 dials 800.366.8201 (CTL Support).
  2. Call is delivered to CenturyLink Support.
  3. Once the user hears an announcement or speaks with an operator, PBX user hangs up the call.
PassedPBX user dials 800.366.8201
g729-069PBX to PSTN - 911PBX User Calls 911 to get emergency support
  1. PBX User 1 dials xxx-xxx-xxxx (CTL Rep).
  2. Call is delivered to CenturyLink Rep.
  3. PBX User makes conferences 911 operator.
  4. PBX User, CTL rep and 911 operator are conferenced.
Passedsame routing as for g729-067
g729-070PBX to PSTN - InternationalPBX User Calls international numberInternational Call is successfully established and torn down.Passed 
g711-001Anonymous Call Rejection ActivatePBX User dials *77
PSTN Calls PBX User with Caller ID Block
Should receive an announcement
  1. *77 is Dialed PBX and leaves.
  2. PBX Phones gets an announcement.
  3. Calling Party blocks caller ID.
  4. Calling party makes a call to PBX User.
  5. Calling Party receives an announcement when PBX user is dialed.
Passed 
g711-002Anonymous Call Rejection Deactivate PBX User dials *87
PSTN Calls PBX User with Caller ID block
Call Should Complete
  1. *87 is dialed PBX.
  2. User receives and announcement.
  3. PSTN calls PBX User.
  4. PSTN Phone receives ringback.
  5. PBX Phone gets ringing.
  6. PBX Phone get Caller ID.
  7. PBX Phone answer the Call.
  8. 2 way audio is received.
  9. PBX Phone releases Calls.
  10. PSTN receives a Bye.
Passed 
g711-003Anonymous Call PBX-BW PBX sends anonymous call to BW
BW delivers the calls Private or unknown or anonymous to PSTN
  1. PBX is configured to send a call to BW as anonymous with TN as PSTN.
  2. BW delivers the call to PSTN as Private or Anonymous.
  3. PSTN phone shows the call as Private or Anonymous.
  4. Call is answered by PSTN.
  5. PBX user hangs up the call.
Passed 
g711-004Alien TNs A call PBX call originate where the from TN that is not part of the customer trunk group.  As long as the pilot number is identified in outgoing call by PAI, the BroadWorks will accept and route the call.
  1. After Alien TN is set up on a Trunk in CenturyLink Network.
  2. PBX User Places a Call to PSTN.
  3. PBX User receives ringback.
  4. PSTN receives ringing.
  5. PSTN receives caller id of the Alien TN.
  6. PSTN answers the call.
  7. 2 way audio is received.
  8. PBX Phone releases Calls.
  9. PSTN receives a Bye.
Passed 
g711-005Barge In Create a Pick Up Group with 2 PBX Users
PSTN Calls PBX User 1
PBX User 2 dials *33 +PBX User Ext
PSTN, User 1, and User 2 should be conf
  1. PSTN calls PBX User 1.
  2. PSTN Phone receives ringback.
  3. PBX Phone gets ringing.
  4. PBX Phone get Caller ID.
  5. PBX Phone answer the Call.
  6. 2 way audio is received.
  7. PBX User 2 Dials *33 + PBX User 1 Extension PSTN, PBX User 1, and PBX User 2 are conferenced together.
  8. 2 Way Audio is heard by all Legs.
  9. PBX User 1 drops from Call.
  10. 2 way Audio is heard by PSTN and PBX User 2.
  11. PSTN drops call.
  12. PBX User 2 receives a Bye.
Passed 
g711-006Barge In Exempt In the Portal Enable Barge In Exempt
Create a Pick Up Group with 2 PBX Users
PSTN Calls PBX User 1
PBX User 2 dials *33 +PBX User Ext
User 2 Should not be conf
  1. Barge in Exempt is set on PBX user 1.
  2. PSTN calls PBX User 1.
  3. PSTN Phone receives ringback.
  4. PBX Phone gets ringing.
  5. PBX Phone get Caller ID.
  6. PBX Phone answer the Call.
  7. 2 way audio is received. PBX User 2 Dials *33 + PBX User 1 Extension.
  8. PBX user 2 is not allowed to barge in PSTN drops the call.
  9. PBX User 1 receives a Bye.
Passed 
g711-009Call Forwarding Always Activate PBX User dials *72
Enter the CFA Destination TN
PSTN calls PBX User with CFA
  1. PBX User 1 Dials *72.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. PSTN Calls PBX User 1.
  7. PSTN receives ringback.
  8. PBX User 1 does not ring.
  9. PBX User 2 gets ringing.
  10. PBX user 2 receives Caller ID (PSTN Originator Caller).
  11. PBX User answers call.
  12. 2 way Audio.
  13. PSTN releases call.
  14. PBX User 2 receives a Bye.
Passed 
g711-010Call Forwarding Always InterrogatePBX User with CFA dials
*21*
Announcement received
  1. PBX User 1 Dials *21*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-011Call Forwarding Always  Deactivate PBX User with CFA dials *73
PSTN Calls PBX User 
  1. PBX User 1 Dials *73.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-012Call Forwarding Always to Voicemail Activate PBX User Dials *21
PSTN Dials PBX User with CFA
Verify Call goes to Voicemail
  1. PBX User 1 Dials *21.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. PSTN User Calls PBX User 1.
  5. Call should go directly to voicemail.
  6. Announcement is Heard.
  7. Leave voicemail.
  8. After leaving voicemail.
  9. PSTN should receive a Bye.
  10. PBX User 1 should receive and MWI.
Passed 
g711-013Call Forwarding Always to Voicemail Deactivate PBX User with CFA dial #21
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #21.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-014PSTN with Privacy call to PBX is CFA to PSTN PBX User  is configured  with CFA to PSTN 2
PSTN 1 Calls PBX  with Caller ID Restricted
PSTN 1 hears ring back
PBX sends a new call to BW with PSTN 2 Number, From as Anonymous and PAI set to Pilot Number
BW forwards the call to PSTN2
PSTN 2 hears ringing
PSTN 2 Caller ID displays Pilot Number
PSTN 2 Answers the call.
Two way voice path is established between PSTN 1 and PSTN 2
PSTN 2 hangs up
Pilot Number should be shown as CLID on PSTN2Passed 
g711-015PSTN call is CFB to PSTN with ID RestrictedPBX configured to send CFB to BW for identified Station.
BW is configured with CFB to PSTN2.
PSTN 1 Calls PBX  with Caller ID Restricted
PSTN 1 hears ring back
PBX send 486 Busy to BW
BW forwards the call to PSTN2
PSTN 2 hears ringing
PSTN 2 Caller ID displays Private/Anonymous
PSTN 2 Answers the call.
Two way voice path is established between PSTN 1 and PSTN 2
PSTN 2 hangs up
PSTN2 should receive Private/Anonymous as CLIDPassed 
g711-016Call Forwarding Busy ActivatePBX User dials *90
Enter the CFB Destination TN
PSTN calls PBX User with CFB
  1. PBX User 1 Dials *90.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. Busy PBX User 1.
  7. PSTN Calls PBX User 1.
  8. PSTN receives ringback.
  9. PBX User 1 does not ring.
  10. PBX User 2 gets ringing.
  11. PBX user 2 receives Caller ID (PSTN Originator Caller).
  12. PBX User answers call.
  13. 2 way Audio.
  14. PSTN releases call.
  15. PBX User 2 receives a Bye.
Passed 
g711-017Call Forwarding Busy Interrogate PBX User with CFB dials
*67*
Announcement received
  1. PBX User 1 Dials *67*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-018Call Forwarding Busy Deactivate PBX User with CFB dials *91
PSTN Calls PBX User 
  1. PBX User 1 Dials *91.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-019Call Forwarding Busy to Voicemail ActivatePBX User Dials *40
PSTN Dials PBX User with CFB
Verify Call goes to Voicemail
  1. PBX User 1 Dials *40.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. Busy PBX User 1 PSTN User Calls PBX User 1.
  5. Call should go directly to voicemail.
  6. Announcement is Heard.
  7. Leave voicemail.
  8. After leaving voicemail.
  9. PSTN should receive a Bye.
  10. PBX User 1 should receive and MWI.
Passed 
g711-020Call Forwarding Busy to Voicemail Deactivate PBX User with CFB dial #40
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #40.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-021Call Forwarding No Answer Activate PBX User dials *92
Enter the CFNA Destination TN
PSTN calls PBX User with CFNA
  1. PBX User 1 Dials *92.
  2. Announcement is heard.
  3. PBX User enters PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. PSTN Calls PBX User 1.
  7. PSTN receives ringback.
  8. PBX User 1 gets ringing.
  9. PBX User 1 receives Caller ID.
  10. After timer is RNA is received.
  11. PBX User 2 gets ringing.
  12. PBX user 2 receives Caller ID.
  13. PBX User 2 answers call.
  14. 2 way Audio.
  15. PSTN releases call
PBX User 2 receives a Bye.
Passed 
g711-022Call Forwarding No Answer- RNA TimerPBX User dials *610
Enter 1 #
PSTN calls PBX User with CFNA
Verify Call is forwarded
  1. PBX User 1 Dials *610.
  2. Announcement is Heard.
  3. PBX User enter 1 for amount of Rings.
  4. After announcement completes PBX User 1 receives a Bye.
  5. PSTN Calls PBX User 1.
  6. PSTN receives ringback.
  7. PBX User 1 gets ringing.
  8. PBX User 1 receives Caller ID.
  9. After timer is RNA is received.
  10. PBX User 2 gets ringing.
  11. PBX user 2 receives Caller ID.
  12. PBX User 2 answers call.
  13. 2 way Audio.
  14. PSTN releases call.
  15. PBX User 2 receives a Bye.
PassedOnly 2 rings can be entered.
g711-023Call Forwarding No Answer Interrogate PBX User with CFNA dials
*61*
Announcement received
  1. PBX User 1 Dials *61*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-024Call Forwarding No Answer Deactivate PBX User with CFNA dials *93
PSTN Calls PBX User 
  1. PBX User 1 Dials *93.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-025Call Forwarding No Answer to Voicemail ActivatePBX User Dials *41
PSTN Dials PBX User with CFNA
Verify Call goes to Voicemail
  1. PBX User 1 Dials *41.
  2. Announcement is received.
  3. When announcement completes PBX User receives a Bye.
  4. Busy PBX User 1.
  5. PSTN User Calls PBX User 1.
  6. Call should go to voicemail after RNA timer is reached.
  7. Announcement is Heard.
  8. Leave voicemail.
  9. After leaving voicemail PSTN should receive a Bye.
  10. PBX User 1 should receive and MWI.
Passed 
g711-026Call Forwarding No Answer to Voicemail Deactivate PBX User with CFNA dial #41
PSTN dials PBX User verify Phone rings
  1. PBX User 1 Dials #41.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-027Call Forwarding Not Reachable Activate PBX User dials *94
Enter the CFNR Destination TN
Unregister Pilot TNs
PSTN calls PBX User with CFNR
Verify Call is forwarded
Register Pilot TNs
  1. PBX User 1 Dials *94.
  2. Announcement is heard.
  3. PBX User enter PBX User 2 TN.
  4. Announcement is heard.
  5. PBX Receives a Bye.
  6. Unplug SBC Lan Cable.
  7. PSTN Calls PBX User 1.
  8. PSTN receives ringback.
  9. PBX User 1 does not ring.
  10. PSTN User 2 gets ringing.
  11. PSTN user 2 receives Caller ID (PSTN Originator Caller).
  12. PSTN User answers call.
  13. 2 way Audio.
  14. PSTN User 1 releases call.
  15. PSTN User 2 receives a Bye.
Passed 
g711-028Call Forwarding Not Reachable Interrogate PBX User with CFNR dials
*63*
Announcement received
  1. PBX User 1 Dials *63*.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-029Call Forwarding Not Reachable DeactivatePBX User with CFNR dials *95
PSTN Calls PBX User 
  1. PBX User 1 Dials *95.
  2. Announcement is Heard.
  3. After announcement completes PBX User 1 receives a Bye.
Passed 
g711-030Call Forwarding Selective ActivateLog into Portal and set up Call forward selective User with a PSTN Number
PBX User with CFS enters #76
PSTN User calls PBX User with CFS
Call should be call forwarded
  1. Log into Portal and set up Call forward selective User with a PSTN Number.
  2. PBX User with CFS dials #76.
  3. Announcement received.
  4. PBX User receives a Bye.
  5. From a Selected PSTN Dial PBX User 1.
  6. PBX User should not Ring.
  7. Call should be call forwarded to the CFS Destination.
  8. PSTN receives Ringback.
  9. Destination receives Ringing.
  10. Destination receives Caller ID (Originator PSTN).
  11. Destination answers call.
  12. 2 way Audio.
  13. PSTN ends the call.
  14. Destination receives a Bye.
Passed 
g711-031Call Forwarding Selective DeactivatePBX User with CFS enters #77
PSTN User calls PBX User
Call should not be forwarded
  1. PBX User 1 Dials #77.
  2. Announcement is heard.
  3. PBX Receives a Bye.
  4. PSTN Calls PBX User 1.
  5. PSTN receives ringback.
  6. PBX User 1 gets ringing.
  7. PBX user 1 receives Caller ID.
  8. PBX User answers call.
  9. 2 way Audio.
  10. PSTN releases call.
  11. PBX User 2 receives a Bye.
Passed 
g711-033Consultative Transfer with SIP REFER PBX User Calls PSTN
PBX User transfers PSTN to PSTN2
PBX User has Audio with PSTNs
PSTN 1 has MOH
PBX User Transfers Call
PSTN and PSTN2 now have audio
 Passed 
g711-034Unattended Transfer with SIP REFER PBX User Calls PSTN
PBX User transfers PSTN to PSTN2
During Ringback PBX User transfers
PSTN 1 has MOH
PSTN2 answers call
PSTN and PSTN2 now have audio
 Passed 
g711-035Consultative Transfer  PBX User Calls PSTN
PBX User transfers PSTN to PBX User 2
PBX User 1 has Audio with PBX User 2
PSTN 1 has MOH
PBX User Transfers Call
PSTN and PBX 2 now have audio
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PBX User transfers call to PBX User 2.
  8. PSTN User gets MOH.
  9. PBX User 1 gets Dial tone.
  10. PBX User 1 dials PBX User 2 Extension.
  11. PBX User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PBX User 1.
  14. PBX User 2 answers the Call.
  15. 2 way Audio.
  16. PBX User 1 transfers the call.
  17. MOH Ends.
  18. PSTN 1 and PBX User 2 are now connected.
  19. 2 Way Audio.
  20. PSTN 1 Ends the call.
  21. PBX User 2 receives the Bye.
Passed 
g711-036Unattended Transfer PBX User Calls PSTN
PBX User transfers PSTN to PBX User 2
During Ringback PBX User transfers
PSTN 1 has MOH
PBX User 2 answers call
PSTN and PBX User 2 now have audio
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PBX User transfers call to PBX User 2.
  8. PSTN User gets MOH.
  9. PBX User 1 gets Dial tone.
  10. PBX User 1 dials PBX User 2 Extension.
  11. PBX User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PSTN 1.
  14. PBX User 1 release call.
  15. PBX User 2 answers the Call.
  16. MOH Ends.
  17. 2 way Audio.
  18. PSTN 1 release the call.
  19. PBX User 2 receives the Bye.
Passed 
g711-037Call Waiting Persistent ActivatePBX User dials *43
PSTN Calls PBX User
PSTN 2 Calls PBX User
Verify Call Waiting Tone
  1. PBX User 1 Dials *43.
  2. Announcement is heard.
  3. PBX Receives a Bye.
  4. PSTN User 1 Calls PBX User 1.
  5. PSTN User 1 receives ringback.
  6. PBX User 1 gets ringing.
  7. PBX user 1 receives Caller ID.
  8. PBX User answers call.
  9. 2 way Audio.
  10. PSTN User 2 Calls PBX User 1.
  11. PSTN User 2 receives ringback.
  12. PBX User 1 receives caller ID.
  13. PBX User 1 hear Call Waiting Tone.
  14. PBX User Places PSTN User 1 on Hold.
  15. PSTN User 1 hears MOH.
  16. PBX User 1 answers Call from PSTN 2.
  17. 2 way Audio.
  18. Verify PBX User 1 can swap between to callers.
  19. While on PBX User 1 and PSTN User 1.
  20. PSTN 1 releases Call.
  21. PBX User 1 receives a Bye.
  22. Call 2 should still be up with PSTN 2 hearing MOH.
Passed 
g711-038Call Waiting Persistent DeactivatePBX User Dials #43
PSTN Calls PBX User
PSTN 2 Calls PBX User
Call 2 should go to voicemail
  1. PBX User 1 Dials #43.
  2. Announcement is heard.
  3. PBX User 1 Receives a Bye after.
  4. Announcement is completed.
  5. PSTN User Calls PBX User 1.
  6. PSTN User 1 Calls PBX User 1.
  7. PSTN User 1 receives ringback.
  8. PBX User 1 gets ringing.
  9. PBX user 1 receives Caller ID.
  10. PBX User 1 answers call.
  11. 2 way Audio.
  12. PSTN User 1 releases the call.
  13. PBX User 1 receives a Bye.
PassedCall Forwarding Busy to Voicemail  is activated to send PSTN User 2 to voicemail
g711-039Customer Originated Trace PSTN Calls PBX User
PBX User Answers the Call
PBX User Hangs up call
PBX User enters *57
Verify announcement
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN releases call.
  8. PBX User 2 receives a Bye.
  9. PBX User 1 Dial *57.
  10. Announcement received.
  11. Announcement Completes.
  12. PBX User receives a Bye.
Passed 
g711-040Enhanced Call Logs Log into portal and verify Call logs
  1. Log into the portal for PBX User 1.
  2. On main screen verify calls Logs are displayed:
Missed
Received
Placed.
Passed 
g711-041Last Number Redial PBX User dials *66
The last number dialed should be called
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN releases call.
  8. PBX User 1 receives a Bye.
  9. PBX User 1 Dial *66.
  10. PSTN receives ringback.
  11. PBX User 1 gets ringing.
  12. PBX user 1 receives Caller ID.
  13. PBX User answers call.
  14. 2 way Audio.
  15. PSTN releases call.
  16. PBX User 1 receives a Bye.
PassedThe PBX user has to dial a PSTN number. After they hang up the call, the PBX user dials *66 and it dials the last PSTN number.
g711-042MOH Verify MOH for conference, transfer, and hold
  1. PSTN Calls PBX User 1.
  2. PSTN receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PBX User 1 Places call on Hold.
  8. PSTN receives MOH.
  9. PBX User retrieves call from Hold.
  10. 2 way Audio.
  11. PSTN releases call.
  12. PBX User 2 receives a Bye.
Passed 
g711-043Remote Office  - Like CFAProvision Remote office for a SIP Trunk user on the BroadWorks portal to use PSTN number A. Place a call from a PSTN number B to the SIP Trunk user's DID and verify that it is forwarded to PSTN number A (the destination configured in BroadWorks). 
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. PSTN User 2 Calls PBX User 1.
  4. PSTN 2 receives ringback.
  5. PSTN User 1  gets ringing with PSTN 2 Caller ID and Diversion header for PBX User1.
  6. PSTN User 1 answers call.
  7. 2 way Audio.
  8. PSTN 1 releases call.
Passed 
g711-044Remote Office - Quick CallProvision Remote office for a SIP Trunk user 1 on the BroadWorks portal to use PSTN number A. On the BW portal,  Manage Users, select Configure Features of User 1, under Quick Call, add PSTN B number and click on the Call Button. PSTN A should Start Ringing with PBX User 1 Caller ID.  
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. Initiate a Quick Call to PSTN 2 on the portal.
  4. PSTN User 1  gets ringing with PBX User 1  Caller ID.
  5. PSTN user 1 answers the call.
  6. Now PSTN2 should start ringing with PBX User1 as Caller ID.
  7. PSTN 1 might hear ringback based on how long PSTN 2 rings.
  8. PSTN 2 answers the call.
  9. 2 way Audio.
  10. PSTN 1 releases call.
Passed 
g711-045Remote Office - Click to  CallProvision Remote office for a SIP Trunk user 1 on the BroadWorks portal to use PSTN number A. On the BW portal,  Manage Users, select Configure Features of User 1, under Call Logs, select either incoming/outgoing/missed calls and  Click on a  Call under "Phone Number Click To call" column. PSTN A should Start Ringing with PBX User 1 Caller ID.  
  1. Log into the portal for PBX User 1.
  2. Set up remote Office to PSTN Number 1.
  3. Review call logs and identify a call log that needs to be called via Click to Call.
  4. Click on the identified call log under "Click to Call".
  5. PSTN User 1  gets ringing with PBX User 1  Caller ID.
  6. PSTN user 1 answers the call.
  7. Now PSTN2 should start ringing with PBX User1 as Caller ID.
  8. PSTN 1 might hear ringback based on how long PSTN 2 rings.
  9. PSTN 2 answers the call.
  10. 2 way Audio.
  11. PSTN 1 releases call.
Passed 
g711-046Selective Call Acceptance Provision selective call acceptance in the BroadWorks portal. Place a call from an accepted TN to the SIP Trunk User. Verify that the call completes normally. Place a call from a TN that is not on the accept list and verify that the call does not reach the  SBC.
  1. Log into the portal for PBX User 1.
  2. Set up Selected Call Acceptance to PSTN Number 1.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. PBX User answers call.
  8. 2 way Audio.
  9. PSTN releases Call.
  10. PBX User 1 receives a Bye.
PassedPSTN 1: 2144326840
g711-047Selective Call Rejection Provision selective call rejection in the BroadWorks portal. Place a call from a TN not on the reject list to the SIP Trunk User. Verify that the call completes normally. Place a call from a TN that is on the reject list and verify that the call does not reach the SBC.
  1. Log into the portal for PBX User 1.
  2. Set up Selected Call rejection to PSTN Number 1.
  3. PSTN Calls PBX User 1.
  4. Verify PSTN gets an announcement.
  5. PSTN receives a Bye.
PassedPSTN 1: 2144326840
g711-048Sequential RingProvision sequential ring in the BroadWorks portal. Place a call to the SIP trunk user. Verify that the numbers in the sequential ring list are dialed in order.
  1. Log into the Portal for PBX User 1.
  2. Set up Sequential Ring with PBX User 2 and PBX User 3.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. After RNA Timer PBX User 1 receives a Cancel.
  8. PBX User 2 gets ringing.
  9. PBX user 2 receives Caller ID.
  10. After RNA Timer PBX User 1 receives a Cancel.
  11. PBX User 3 gets ringing.
  12. PBX user 3 receives Caller ID.
  13. PBX User 3 answers call.
  14. 2 way Audio.
  15. PSTN releases Call.
  16. PBX User 3 receives a Bye.
PassedPBX1: 6146984918, PBX2: 6146984919, PBX3: 6146984916
g711-049Simultaneous Ring Provision Simultaneous ring in the BroadWorks portal. Place a call to the SIP trunk user. Verify that the numbers in the Simultaneous ring list are dialed at once.
  1. Log into the Portal for PBX User 1.
  2. Set up Simultaneous Ring with PBX User 2 and PBX User 3.
  3. PSTN Calls PBX User 1.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. PBX User 2 gets ringing.
  8. PBX user 2 receives Caller ID.
  9. PBX User 3 gets ringing.
  10. PBX user 3 receives Caller ID.
  11. PBX User 3 Answers Call.
  12. PBX User 1 and 2 receive a Cancel.
  13. 2 way Audio.
  14. PSTN releases Call.
  15. PSTN User 3 receives a Bye.
PassedPBX1: 6146984918, PBX2: 6146984919, PBX3: 6146984916
g711-050Third Party MWI Control NOTIFY  Provision Third Party MWI in the BroadWorks portal. Provision the CT Voice Mail system to notify BroadWorks of unread messages in the user's voice mail box. Confirm that the NOTIFY is sent to BroadWorks and that the NOTIFY is sent to the PBX.
  1. PSTN User Calls PBX User 1.
  2. Call should go to voicemail after RNA timer is reached.
  3. Announcement is Heard.
  4. Leave voicemail.
  5. After leaving voicemail.
  6. PSTN should receive a Bye.
  7. PBX User 1 should receive and MWI.
  8. PBX User 1 dials *86.
  9. Log into Mailbox.
  10. Listen To Voicemail.
  11. Delete Voicemail.
  12. Verify MWI is gone.
  13. PBX User 1 ends the Call.
Passed 
g711-051Voice Mail ConsultationProvision Voice Mail n the BroadWorks or NYMPH portal. Provision the PBX to forward calls to an external voice mail system as the user's call coverage. Confirm the PBX user's capability to retrieve voice mail from the external Voice Mail system.
  1. PSTN User Calls PBX User 1.
  2. Call should go to voicemail after RNA timer is reached.
  3. Announcement is Heard.
  4. Leave voicemail.
  5. After leaving voicemail PSTN should receive a Bye.
  6. PBX User 1 should receive and MWI.
  7. PBX User 1 dials *86.
  8. Log into Mailbox.
  9. Listen To Voicemail.
  10. Delete Voicemail.
  11. Verify MWI is gone.
  12. PBX User 1 ends the Call.
Passed 
g711-052PBX Initiate ConferencePBX User Calls PSTN
PBX User Conferences PBX User 2
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PBX User conferences call to PBX User 2.
  8. PSTN User gets MOH.
  9. PBX User 1 gets Dial tone.
  10. PBX User 1 dials PBX User 2 Extension.
  11. PBX User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PBX User 1.
  14. PBX User 2 answers the Call.
  15. 2 way Audio.
  16. PBX User 1 conferences the call.
  17. MOH Ends.
  18. PSTN 1, PBX User 1 and PBX User 2 are now connected.
  19. 2 Way Audio.
  20. PBX User 1 Ends the call.
  21. PBX User 2 and PSTN receives the Bye.
PassedPBX user 2 and PSTN still have audip on after PBX user 1 ends the call
g711-053PSTN Initiate ConferencePBX User calls PSTN
PSTN conferences PBX User2
  1. PBX User 1 Calls PSTN.
  2. PBX User receives Ringback.
  3. PSTN 1 receives Ringing.
  4. PSTN 1 receives Caller ID.
  5. PSTN 1 answers.
  6. 2 way Audio.
  7. PSTN User 1 conferences call to PBX User 2.
  8. PBX User 1 gets MOH.
  9. PSTN User 1 gets Dial tone.
  10. PSTN User 1 dials PBX User 2 Extension.
  11. PSTN User 1 receives Ringback.
  12. PBX User 2 receives Ringing.
  13. PBX User 2 receives Caller ID of PSTN User 1.
  14. PBX User 2 answers the Call.
  15. 2 way Audio.
  16. PSTN User 1 conferences the call.
  17. MOH Ends.
  18. PSTN 1, PBX User 1 and PBX User 2 are now connected.
  19. 2 Way Audio.
  20. PSTN User 1 Ends the call.
  21. PBX User 1 and PBX User 2 Still Have Audio.
  22. PBX User 1 End the Call.
  23. PBX User 2 receives a Bye
Passed 
g711-054Huntgroup Seq RingPSTN Calls Huntgroup Seq ring
Answer call on 2nd Member
  1. Log into Admin Portal.
  2. Create Huntgroup with 3 members.
  3. PSTN Calls Huntgroup.
  4. PSTN receives ringback.
  5. PBX User 1 gets ringing.
  6. PBX user 1 receives Caller ID.
  7. After RNA Timer is reached.
  8. PBX User 2 gets ringing.
  9. PBX user 2 receives Caller ID.
  10. PBX User 2 Answers the call.
  11. 2 way Audio.
  12. PSTN ends the call.
  13. PBX User 2 receives a Bye.
BlockedHunt group is not purchased
g711-057PBX to PBXPBX User Calls PBX User2 Same Trunk
Verify RTP is dropped to SBC
  1. PBX User 1 Calls PBX User 2.
  2. PBX  User 1 receives ringback.
  3. PBX User 2 gets ringing.
  4. PBX user 2 receives Caller ID.
  5. PBX User 2 answers call.
  6. 2 way Audio RTP is on SBC/PBX.
  7. PBX User 1 End the call.
  8. PBX User 2 receives a Bye.
Passed 
g711-058PSTN to PBXPSTN to PBX User
  1. PSTN User 1 Calls PBX User 1.
  2. PSTN User 1 receives ringback.
  3. PBX User 1 gets ringing.
  4. PBX user 1 receives Caller ID.
  5. PBX User answers call.
  6. 2 way Audio.
  7. PSTN User Ends The Call.
  8. PBX User 1 receives a Bye.
Passed 
g711-059PBX to PSTNPBX User to PSTN
  1. PBX User 1 Calls PSTN User 1.
  2. PBX User 1 receives ringback.
  3. PSTN User 1 gets ringing.
  4. PSTN user 1 receives Caller ID.
  5. PSTN User answers call.
  6. 2 way Audio.
  7. PSTN User Ends The Call.
  8. PBX User 1 receives a Bye.
Passed 
g711-060PBX to PBX Different PBX (diff realm)PBX User to PBX User Different PBX (diff realm)
  1. PBX User 1 Calls PBX User 2 Diff Realm.
  2. PBX  User 1 receives ringback.
  3. PBX User 2 gets ringing.
  4. PBX user 2 receives Caller ID.
  5. PBX User 2 answers call.
  6. 2 way Audio RTP.
  7. PBX User 1 End the call.
  8. PBX User 2 receives a Bye.
Passed 
g711-061PSTN to PBX -PassthroughPSTN to PBX User Fax Call
  1. PSTN User 1 Fax Calls PBX User 1 Fax.
  2. PBX User 1 gets ringing.
  3. PBX user 1 receives Caller ID.
  4. PBX User 1 Fax answers call.
  5. Fax is received.
  6. PBX User Ends The Call.
  7. PSTN User 1 receives a Bye.
Passed 
g711-062PBX to PSTN -PassthroughPBX User to PSTN Fax Call
  1. PBX User 1 Fax Calls PSTN User 1 Fax.
  2. PSTN User 1 gets ringing.
  3. PSTN user 1 receives Caller ID.
  4. PSTN User 1 Fax answers call.
  5. Fax is received.
  6. PSTN User Ends The Call.
  7. PBX User 1 receives a Bye.
Passed 
g711-063PSTN to PBX -T38PSTN to PBX User Fax Call
  1. PSTN User 1 Fax Calls PBX User 1 Fax.
  2. PBX User 1 gets ringing.
  3. PBX user 1 receives Caller ID.
  4. PBX User 1 Fax answers call.
  5. Fax is received.
  6. PBX User Ends The Call.
  7. PSTN User 1 receives a Bye.
Passed 
g711-064PBX to PSTN -T38PBX User to PSTN Fax Call
  1. PBX User 1 Fax Calls PSTN User 1 Fax.
  2. PSTN User 1 gets ringing.
  3. PSTN user 1 receives Caller ID.
  4. PSTN User 1 Fax answers call.
  5. Fax is received.
  6. PSTN User Ends The Call.
  7. PBX User 1 receives a Bye.
  
g711-065PBX to PSTN - Packet Marking for SIG packetsPBX to PSTN Call to verify that signaling packets are marked with DSCP = 24 (0x18)All outgoing SIP Signaling packets are marked with DSCP=24PassedSame as TC059
g711-066PBX to PSTN - Packet Marking for RTP packetsPBX to PSTN Call to verify that rtp packets are marked with DSCP = 40 (0x28)All outgoing SIP RTP packets are marked with DSCP=40PassedSame as TC059
g711-067PBX to PSTN - Directory assistancePBX User Calls PBX 411 and speaks with directory assistant
  1. PBX User 1 dials 411.
  2. Call is delivered to Directory Assistant for enquiry.
  3. Once the user hears an announcement or speaks with an operator, PBX user hangs up the call.
Passed 
g711-068PBX to PSTN - Toll FreePBX User Calls 800.366.8201 to test toll free numbers
  1. PBX User 1 dials 800.366.8201 (CTL Support).
  2. Call is delivered to CenturyLink Support.
  3. Once the user hears an announcement or speaks with an operator, PBX user hangs up the call.
Passed 
g711-070PBX to PSTN - InternationalPBX User Calls international numberInternational Call is successfully established and torn down.Passed 
g729-001Configure Dual Trunk on PBXPBX is configured and connected to 2 PSTN GW/SBCsThe steps  will be  based on the type of PBX being utilized.
Ensure that trunks are configured between PBX and SBC.
Verify OPTIONS messages. From either PBX or SBC are being responded correctly by the other entity
Passed 
g729-002Configure Dual Trunk on ITSPITSP is configured and connected to 2 PSTN GW/SBCsThe steps  will be  based on the type of SBC being utilized.
Ensure the TWO SBCs are configured with individual trunks to ITSP.
.Passed 
g729-003Regitration of Dual TrunksEnsure that both trunks to ITSP are registered successfully using the individual trunk registration information1. Each SBC is configured with a trunk to ITSP and associated authentication/digest and registration information.
2. Invoke a command on SBC to register the trunk with ITSP.
3. Verify that 200 OK is received from ITSP for both the trunks.
Passed 
g729-004Inbound PSTN calls pick correct trunk to SBCVerify that PSTN to PBX inbound calls arrive on both the trunks when multiple calls are made1.    Dial an inbound call to the PBX.
2.    Verify ringing is heard by calling and called parties.
3.    Verify the trace shows a valid ringing indication message
4.    Take called party phone off-hook.
5.    Verify that a media path is established in both directions.
6.    Hang up calling party
7.    Verify the IP/PBX receives a Bye message.
8.    Make a note of the Trunk on which the call arrived to the SBC and PBX.
9.    Repeat the above steps 3 more times (total 4 calls).
10.   Verify that calls to PBX arrive on both the trunks.
11.   Document Test Results.
12.   Save Trace.
Passed 
g729-005PBX calls are delivered to PSTN on both the trunksCalls from PBX to PSTN are delivered to ITSP/PSTN utilizing both the configured trunks1.    Dial an outbound call from the PBX.
2.    Verify ringing is heard by calling and called parties.
3.    Verify the trace shows a valid ringing indication message
4.    Take called party phone off-hook.
5.    Verify that a media path established in both directions.
6.    Hang up Calling Party
7.    Verify the IP/PBX sends a Bye message.
8.    Make a note of the Trunk on which the call was sent to ITSP.
9.    Repeat the above steps 3 more times (total 4 calls).
10.   Verify that calls from PBX are sent out on both the trunks to ITSP.
11.   Verify each call has PAI sent per the trunk configuration
12.   Document Test Results.
13.   Save Trace.
Passed 
g729-006Alien TN calls on 1st trunkVerify calls are successful with Alien TNs on 1st trunk1. After Alien TN is set up on a Trunk1 in CenturyLink Network
2. PBX User Places a Call to PSTN
3. PBX User receives ring back
4. PSTN receives ringing
5. PSTN receives caller id of the Alien TN
6. PSTN answers the call
7. 2 way audio is received
8. PBX Phone releases Calls
9. PSTN receives a Bye
Passed 
g729-007Alien TN calls on 2nd  trunkVerify calls are successful with Alien TNs on 2nd  trunk1. After Alien TN is set up on a Trunk2 in CenturyLink Network
2. PBX User Places a Call to PSTN
3. PBX User receives ring back
4. PSTN receives ringing
5. PSTN receives caller id of the Alien TN
6. PSTN answers the call
7. 2 way audio is received
8. PBX Phone releases Calls
9. PSTN receives a Bye
Passed 
g729-008Failover of 1st trunk WAN-PSTN-PBXEnsure that calls are delivered from PSTN to PBX when the first trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 1.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-009Failover of 1st trunk WAN-PBX-PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 1.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-010Restore 1st trunk  WAN: PSTN-PBXEnsure that calls are delivered from PSTN to PBX when the first trunk has has been restored1. WAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 1
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-011Restore 1st trunk  WAN: PBX-PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has has been restored1. WAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-012Failover of 2nd trunk WAN: PSTN-PBXEnsure that calls are delivered from PSTN to PBX when the second trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 2.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 1
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-013Failover of 2nd trunk WAN: PBX-PSTNEnsure that calls are delivered from PBX-PSTN when the second trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 2.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-014Restore 2nd trunk WAN: PSTN-PBXEnsure that calls are delivered from PSTN to PBX when the second trunk has has been restored1. WAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-015Restore 2nd trunk WAN: PBX-PSTNEnsure that calls are delivered from PBX to PSTN when the second trunk has has been restored1. WAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-016Failover of 1st trunk LAN - PBX to PSTNEnsure that calls are delivered from PBX to PSTN  when the first trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 1.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-017Failover of 1st trunk LAN - PSTN to PBXEnsure that calls are delivered from PSTN to PBX  when the first trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 1.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-018Restore 1st trunk  LAN - PBX to PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has has been restored1. LAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-019Restore 1st trunk  LAN - PSTN to PBXEnsure that calls are delivered from PSTN to PBX when the first trunk has has been restored1. LAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-020Failover of 2nd trunk LAN- PBX to PSTNEnsure that calls are delivered from PBX to PSTN  when the second trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 2.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-021Failover of 2nd trunk LAN- PSTN to PBXEnsure that calls are delivered from PSTN to PBX  when the second trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 2.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 1
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-022Restore 2nd trunk LAN- PBX to PSTNEnsure that calls are delivered from PBX to PSTN when the second trunk has has been restored1. LAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g729-023Restore 2nd trunk LAN-PSTN to PBXEnsure that calls are delivered from PSTN to PBX when the second trunk has has been restored1. LAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-001Configure Dual Trunk on PBXPBX is configured and connected to 2 PSTN GW/SBCsThe steps  will be  based on the type of PBX being utilized.
Ensure that trunks are configured between PBX and SBC.
Verify OPTIONS messages. From either PBX or SBC are being responded correctly by the other entity
Passed 
g711-002Configure Dual Trunk on ITSPITSP is configured and connected to 2 PSTN GW/SBCsThe steps  will be  based on the type of SBC being utilized.
Ensure the TWO SBCs are configured with individual trunks to ITSP.
Passed 
g711-003Regitration of Dual TrunksEnsure that both trunks to ITSP are registered successfully using the individual trunk registration information1. Each SBC is configured with a trunk to ITSP and associated authentiation/digest and registration information.
2. Invoke a command on SBC to register the trunk with ITSP.
3. Verify that 200 OK is received from ITSP for both the trunks.
Passed 
g711-004Inbound +A25+B28:C29Verify that PSTN to PBX inbound calls arrive on both the trunks when multiple calls are made1.    Dial an inbound call to the PBX.
2.    Verify ringing is heard by calling and called parties.
3.    Verify the trace shows a valid ringing indication message
4.    Take called party phone off-hook.
5.    Verify that a media path is established in both directions.
6.    Hang up calling party
7.    Verify the IP/PBX receives a Bye message.
8.    Make a note of the Trunk on which the call arrived to the SBC and PBX.
9.    Repeat the above steps 3 more times (total 4 calls).
10.   Verify that calls to PBX arrive on both the trunks.
11.   Document Test Results.
12.   Save Trace.
Passed 
g711-005PBX calls are delivered to PSTN on both the trunksCalls from PBX to PSTN are delivered to ITSP/PSTN utilizing both the configured trunks1.    Dial an outbound call from the PBX.
2.    Verify ringing is heard by calling and called parties.
3.    Verify the trace shows a valid ringing indication message
4.    Take called party phone off-hook.
5.    Verify that a media path established in both directions.
6.    Hang up Calling Party
7.    Verify the IP/PBX sends a Bye message.
8.    Make a note of the Trunk on which the call was sent to ITSP.
9.    Repeat the above steps 3 more times (total 4 calls).
10.   Verify that calls from PBX are sent out on both the trunks to ITSP.
11.   Verify each call has PAI sent per the trunk configuration
12.   Document Test Results.
13.   Save Trace.
Passed 
g711-006Alien TN calls on 1st trunkVerify calls are successful with Alien TNs on 1st trunk1. After Alien TN is set up on a Trunk1 in CenturyLink Network
2. PBX User Places a Call to PSTN
3. PBX User receives ring back
4. PSTN receives ringing
5. PSTN receives caller id of the Alien TN
6. PSTN answers the call
7. 2 way audio is received
8. PBX Phone releases Calls
9. PSTN receives a Bye
Passed 
g711-007Alien TN calls on 2nd  trunkVerify calls are successful with Alien TNs on 2nd  trunk1. After Alien TN is set up on a Trunk2 in CenturyLink Network
2. PBX User Places a Call to PSTN
3. PBX User receives ring back
4. PSTN receives ringing
5. PSTN receives caller id of the Alien TN
6. PSTN answers the call
7. 2 way audio is received
8. PBX Phone releases Calls
9. PSTN receives a Bye
Passed 
g711-008Failover of 1st trunk WAN-PSTN-PBXEnsure that calls are delivered from PSTN to PBX when the first trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 1.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-009Failover of 1st trunk WAN- PBX-PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 1.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-011Restore 1st trunk  WAN: PBX-PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has has been restored1. WAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-013Failover of 2nd trunk WAN: PBX-PSTNEnsure that calls are delivered from PBX-PSTN when the second trunk has failed on the WAN side1. Down the WAN interface associated with Trunk 2.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-016Failover of 1st trunk LAN - PBX to PSTNEnsure that calls are delivered from PBX to PSTN  when the first trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 1.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-017Failover of 1st trunk LAN - PSTN to PBXEnsure that calls are delivered from PSTN to PBX  when the first trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 1.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-018Restore 1st trunk  LAN - PBX to PSTNEnsure that calls are delivered from PBX to PSTN when the first trunk has has been restored1. LAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-019Restore 1st trunk  LAN - PSTN to PBXEnsure that calls are delivered from PSTN to PBX when the first trunk has has been restored1. LAN interface associated with Trunk 1 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-020Failover of 2nd trunk LAN- PBX to PSTNEnsure that calls are delivered from PBX to PSTN  when the second trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 2.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that all 3 calls are delivered to PSTN utilizing Trunk 1
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-021Failover of 2nd trunk LAN- PSTN to PBXEnsure that calls are delivered from PSTN to PBX  when the second trunk has failed on the LAN side1. Down the LAN interface associated with Trunk 2.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that all 3 calls are delivered to PBX utilizing Trunk 1
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-022Restore 2nd trunk LAN- PBX to PSTNEnsure that calls are delivered from PBX to PSTN when the second trunk has has been restored1. LAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PBX to PSTN (one after the other)
3. Ensure that at least one call is delivered to the PSTN via Trunk 2
4. PSTN user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 
g711-023Restore 2nd trunk LAN- PSTN to PBXEnsure that calls are delivered from PSTN to PBX when the second trunk has has been restored1. LAN interface associated with Trunk 2 is brought back into service.
2. Make 3 calls from PSTN to PBX (one after the other)
3. Ensure that at least one call is delivered to the PBX via Trunk 2
4. PBX user answers the call
5. Verify two way voice path is established
6. Called Party hangs up
7. Both Calling and Called parties are disconnected
8. Document results
9. Save traces
Passed 

 

Conclusion

These Application Notes describe the configuration steps required for Ribbon to successfully interoperate with Avaya Communication Manager 7.1 and CenturyLink. All feature and serviceability test cases were completed and passed, with the exceptions and observations noted in Test Results.

Appendix A

N/A